Resources

Repair Workshop

Repairs for classic lightweight bicycles, step by step, drawn and set moving, from the period’s own instructions in the Ebykr archive.

Its sibling, the Mechanism Workshop, shows how a part works. A repair page shows how to service it.

What is inside a repair page

Each repair is one job on a classic lightweight, from setting a derailleur to oiling the whole bicycle. Every page has the same four parts.

  1. A drawing that moves. It steps through the job while you read, and shows what text cannot: the inside of a casing, the angle of a cage.
  2. The steps, in order. Each is written as the maker or period booklet gave it. Jump to any step, follow the drawing, or tick each step done as you go.
  3. Tools and parts. Named in the source’s own terms, with boxes to tick as you gather them.
  4. The source. Every step names the archive record it rests on. Where the source gives no figure, the page gives none.
A model of the rear derailleur page, with its drawing, its nine steps and its source. The numbers match the list.

Repairs, by part

Seven repairs are ready to follow; each card opens a full page. Repairs still in preparation are counted under their part and appear here once the archive holds the period method.

Wheels and tires

Tubulars, hubs and rims.

3 more in preparation
  • Fit a Campagnolo quick-release hub
  • Mend a puncture in a wired-on tire
  • True a wheel

Gears, chains and freewheels

Derailleurs, hub gears and the drive.

3 more in preparation
  • Fit a chain to the right length
  • Take off and clean a freewheel
  • Adjust a Sturmey-Archer three-speed

Brakes

Side-pulls and centerpulls. Every page here is a safety page.

1 more in preparation
  • Set up a Mafac centerpull
  • Adjust a Side-Pull Brake

    Moderate · Seven steps · Safety part

    Take up the play, set the blocks just off the rim and re-set the cable.

Steering, bearings and cranks

Head races, stems, bottom brackets and cotters. Mostly safety parts.

3 more in preparation
  • Raise or lower a quill stem
  • Service a cup-and-cone bottom bracket
  • Remove and fit a cottered crank
  • Adjust the Head Races

    Moderate · Six steps · Safety part

    Free to turn with very little shake: the screwed race under its lock nut.

Saddles, care and lighting

The leather saddle, the period service list and the lamp.

1 more in preparation
  • Fit a dynamo and lamps

What every repair page keeps to

  • No invented figures
  • Safety parts marked
  • Exact, derived and schematic, step by step
  • Ebykr’s own drawings, never tracings

Can you help?

Several repairs wait on a document the archive does not yet hold: a Sturmey-Archer service leaflet, and a period workshop manual that covers cotters, hubs, headsets and wheels. A scan of either would let those pages be built. Corrections, questions and sources all go in the Repair Workshop thread on the forums.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.