Resources

Mechanism Workshop

How the gears, hubs and brakes of the classic lightweight bicycle work, drawn and set moving one step at a time. Every motion and every number comes from a patent, an instruction sheet or a catalog, in the Ebykr archive wherever it can be, and is cited beside the drawing. Where a detail is not in a document, the drawing says it is schematic.

The set

Twelve mechanisms: nine are finished and three are roughed in, grouped by what they do. Each card names the documents it is drawn from. Point at a card, or tab to it, to see the mechanism at work.

Derailleurs and rod gears

Moving the chain from cog to cog. 4 finished, 2 roughed in.

BuiltRear derailleur Huret

The Jubilee

The light-alloy parallelogram fitted letter by letter from Huret’s sheet, with the chain it takes up worked out from the sheet’s own capacity.

Roughed inRear gear Cyclo

The Benelux

A sprung arm and a toothed jockey sprocket, set by the folder’s rule that three pins line up in low gear.

Gap: the arm’s length and the spring’s rate are in no document read.

BuiltDerailleur Nivex

The Nivex

A 1938 parallelogram worked by a two-ended cable on a crossbar, like an airplane rudder: eight steps from the period review.

Hubs

Gears inside the hub, and the lever that frees the wheel. 3 finished.

Brakes

Two ways to pull two arms together. 1 finished, 1 roughed in.

BuiltBrake Mafac

The Critérium cantilever

Two arms on brazed bosses and a straddle wire, with the catalog’s own brazing dimensions for four wheel sizes.

Off the bicycle

One for the table. 1 finished.

What the archive holds for each

Measured on the archive’s documents table on 2026-11-16, 4,048 records. The AW came first because its leaflet prints the numbers that fix its motion. The Gran Sport and the Jubilee followed because each has the maker’s own fitting sheet with a drawing to work from.

CandidateRecords naming itInstruction sheetsThe maker’s own documentsNumbers they print that fix the motionVerdict
Sturmey-Archer AW570Leaflet AD 519Both ratios (+33.3%, −25%) and a 15-row gear table that agrees with them exactlyBuilt
Campagnolo Gran Sport971Catalog of about 1951 with parts 101 to 172; the fitting sheet of about 1960 with its drawing; a leafletNone on the travel; the sheet’s drawing and five fitting stepsBuilt
Huret Jubilee241The fitting sheet, in three languages, with lettered drawingsCapacity 13 to 24 and 36 to 53, which fixes the chain the cage takes up; 3 mm and 10 mm settingsBuilt
Cyclo Benelux810Benelux folder with fitting instructions and a drawing; a conversion leafletNone on the mechanism; the pin-alignment ruleRoughed in
Mafac centerpull610Catalog of the 1950s with the Racer in parts; catalog of 1976Fitting sizes only: 6 or 7 mm pivot boltsRoughed in
Cambio Corsa, Paris-Roubaix60Catalog of about 1951 with both gears in numbered parts; Nos. 12 and 13NoneRoughed in
Campagnolo quick release2781Quick release hubs instructions of about 1960; the 1951 catalogParts 2 to 61 and three fitting rules; no dimensionsBuilt
Nivex50None; a 1938 reviewGear range and development, 2.30 to 7.80 mBuilt
Campagnolo corkscrew30Catalog No. 17 of 1974 with a photograph; the 1982 United States catalog; Bikecology, 1981The finishes, the Allen bolts and the prices; no sizesBuilt Just for fun
Simplex plunger760None found; the Simplex sheets held are for later parallelogramsNot yet knownSet aside

Records naming it: documents whose transcription or title names the mechanism, read from the archive’s documents index on 2026-11-16; most are dealer catalogs and advertisements that only list it. Instruction sheets: the archive’s instructions type. The Simplex plunger has no reliable count yet: a text search mostly finds the name of Lucien Juy, and the trade-press surveys of 1951 to 1954 that may describe the plunger gears are still to be read.

Still to weigh

Each needs a document that shows how it works before it can join the set. Counts are archive records naming it (a loose text count, 2026-11-16).

  • The freewheel. The pawls that let a rider coast, and simple to draw, but the Regina catalog, the Gipiemme brochure and the Benelux folder only name and size freewheels; none shows the pawls. 536 records; no sheet.
  • The cotterless crank. Stronglight and TA advertisements show the chainsets, but nothing held shows the taper, the bolt or the extractor at work. 144 records; no sheet.
  • The Osgear. Super Champion’s adverts of 1934 and 1935 and the 1936 dealer lists sell it; none explains how the fork and the arm work. 101 records; no sheet.
  • The Dynohub and the bottle dynamo. A new kind for the set, but the inside of a generator is hard to show from adverts; the BSA Hublite leaflet of 1948 is the one maker’s document to read first. 200 records; one leaflet.
  • The Simplex plunger gears. Set aside until a fitting sheet or one of the 1951 to 1954 Salon surveys describes them. 76 records name them; no sheet.

How every drawing is made

Documents first

Motion and numbers come from a patent, an instruction sheet or a catalog. Web pages that agree with one another count as one source.

Every claim labeled

exact printed in a document; derived follows from one; schematic drawn to explain, not measured.

Line work, shaded to sort the parts

Neutral ink in the weight of the site’s icons. Gray hatching tells one moving group from the next, the way a drafting section does, and dense gray marks what is held still. One blue, and only blue, marks whatever carries the load. A switch on every drawing offers colors or plain lines instead. No period-plate imitation.

Still if you prefer

With reduced motion set, each step is a still. Every control works from the keyboard.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.