About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
Source: bulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr.
| Marque | Pino |
|---|---|
| Type | Ephemera |
| Year | 1976 (estimated) |
| Publisher | Pino International Ltd., Warren (Michigan) |
| Country | United States |
| Language | English |
| Pages | 4 |
| Source | bulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr. |
| Credit | Ebykr archive |
| Identifier | Permalink http://bulgier.net/pics/bike/Catalogs/Morroni_Pino/ |
| Transcription | Transcribed by eye |
Reference
Pino International Ltd., Warren (Michigan). Pino International Hub Crank Sheets of about 1976: Specifications, Maintenance and Assembly Instructions and the Crank Hub Assembly Leaflet, Warren, Michigan. c. 1976. Ebykr, https://ebykr.com/library/pino-hub-crank-sheets-about-1976/.
Wikipedia
{{cite web |title=Pino International Hub Crank Sheets of about 1976: Specifications, Maintenance and Assembly Instructions and the Crank Hub Assembly Leaflet, Warren, Michigan |publisher=Pino International Ltd., Warren (Michigan) |date=c. 1976 |url=https://ebykr.com/library/pino-hub-crank-sheets-about-1976/ |website=Ebykr |access-date=}}PINO INTERNATIONAL LTD. 6835 E. 9 Mile Rd. Warren, Michigan 48091 105 N. KINROSS ------- CLAWSON, MICHIGAN 48017 ------- (313) 435 -2400 Pino Hub Crank Specifications, Maintanence and Assembly Instructions: I. This unit works on two MRC 1903s Series or Fafnir 9303k, Any bearing store technician in the USA can supply and explain the bearings …
Four pages from Pino International Ltd. of Warren, Michigan: a two-page typed letter of specifications, maintenance and assembly instructions for the Pino hub crank (bottom bracket unit) and the yellow leaflet “Professional Bicycle Crank Hub Assembly”. No year is printed.
— Page 1 —
PINO INTERNATIONAL LTD.
6835 E. 9 Mile Rd. Warren, Michigan 48091
105[?] N. KINROSS ——- CLAWSON, MICHIGAN 48017[?] ——- (313) 435[?]-2400 [struck through by typed hyphens]
Pino Hub Crank
Specifications, Maintanence and Assembly Instructions:
I. This unit works on two MRC 1903s Series or Fafnir 9303k,
Any bearing store technician in the USA can supply and
explain the bearings in greater detail. The two bearings
are not the shield or seal type which means they can be
cleaned and greased at any time.
II. In order to use such precision ball bearings, it is necessary
that they be assemblied in a precision Housing or adequate
to the bearing specification.
III. In any thin wall welding construction, it is just about
impossible to build a precision housing, this is especially
true for a bicycle frame, which has basically a four cavity,
produced by the two tubes and the lower rear fork.
IV. Pino’s Bottom Bracket provides a precision housing in the
frame housing, this means that once the unit is installed with
the shell and corresponding lock ring nuts, it is a permanent
member of the frame.
V. A solid unit tap is required for Pino’s Bottom Bracket assembly.
In order to have the frame’s thread in line on both sides,
such a tap comes with a threaded lead and allows even an
apprentice to perform the work. Such a tap is the same size and
thread as the original, except for the 1.370×24 where the diametor
and thread is the same but right hand all the way. This is
established by starting the tap from the right hand thread side
and going straight through. The tap has to go through, up to the
full thread spot, meaning after the undersize pilot thread.
VI. It is recommended to use lock tight 242 threaded fitting type
to seal the two aluminum ring nuts permanently.
VII. The shell and the crank shaft can be assemblyed offset to the
desired position by the rings nuts and the bearing fastener caps.
This is to provide a proper chain wheel sproket line up. It
is of my opinion that for road assemblys, the line up would be better
toward the small gear (13-14-15), because the offline draging of
the chain will be greater where extra tork action is needed.
This unit is built like a micrometric spindle, thrust bearing
adjusting is not required.
VIII. The whole unit can be pushed out by unscrewing the two bearing
cap fasteners and tapping the unit with a rubber or wood hammer.
Do not ever hammer the bearing on the outer ring. Always hammer
on the inner rings. This unit should be sold with an extra
heavy duty bolt and washer with the sole intention of fastening
the crank arms firmly the first they are installed.
[A typed page headed Pino International Ltd. with a logo of three seated mice, giving the Pino Hub Crank specifications, maintenance and assembly instructions numbered I to VIII. The second address line in the letterhead is struck through with typed hyphens.]
— Page 2 —
PINO INTERNATIONAL LTD.
[hidden]
Finallv, in the future, as soon as an agreement or deal
can be established with the frame manufacturers, there
will be no need for a thread in the frame housing, but
merely a reaming job to suit the shell stock size so the
unit will show only a short thread for the ring nuts on
both ends.
Sincerely Yours,
Pino International Ltd.
President
rs
[A typed letterhead page with the Pino International Ltd. name, a logo of three seated mice and a closing paragraph signed Pino International Ltd., President, with the typist’s initials below. A rubber stamp with an address and telephone number sits above the mice at the top right, and a black ink bar covers the second letterhead line.]
— Page 3 (front cover) —
Pedal with
Pino
International Ltd.
Professional
Bicycle Crank Hub Assembly
U.S. Patent 5-903-754
Pino International Ltd.
6835 E. 9 MILE RD. WARREN, MICH. 48091
(313) 757-0500
[The yellow outer cover of a Pino International Ltd. leaflet, scanned turned on its side, with a photograph of the Professional Bicycle Crank Hub Assembly on the right panel and the company’s address and telephone number on the left panel. A horizontal fold line crosses the sheet and a small dark mark sits near the top of the right panel.]
— Page 4 —
The Pino professional crank hub assembly provides the ultimate in lightweight strength and smooth pedaling action. This superior quality crank hub assembly removes essentially all drag, cuts friction and provides for exact alignment of assembly with rear sprockets.
Precision-made from magnesium, aluminum and titanium components for universal frame hanger application.
Hanger (ref.)
Universal aluminum shell supports crank assembly independently of bicycle frame. Fits all frame hangers.
Aluminum lock nuts (2) retain shell in frame hanger.
Precision micrometric aluminum spacer houses crankshaft.
Aluminum washers (2) and screws (2) fasten crank arms to assembly.
Super tough, super lightweight titanium or steel crankshaft withstands any human torque.
Precision bearings (2) have close tolerance adjustment, directly abutting internal sleeve within shell.
Threaded caps disposed within shell provide for adjustability and exact alignment with rear sprockets.
Crank Arm (ref.)
[An exploded drawing of the Pino crank hub assembly showing the hanger, shell, lock nuts, spacer, crankshaft, bearings, threaded caps, crank arm, washer and screw, with printed callouts, on yellow paper scanned turned on its side. A fold line runs down the middle of the sheet.]
Ebykr presents this material for research and education. If you hold rights to it or notice an ownership issue, please contact us and we will respond promptly.
The Ebykr Digest
New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.
Double opt-in. One email per month. Unsubscribe at any time with one click.