Mechanism Workshop Mavic bottom bracket

Built  Bottom bracket · Mavic, France · about 1984

The Mavic 610 URD and 616 RD bottom bracket

A bottom bracket that is fitted as one unit into a drilled and chamfered shell, drawn from Mavic’s own instruction sheet in the Ebykr archive. The sheet gives the work in order, from the frame to the bearings, in five languages; it prints almost no sizes, so the drawing follows its order and its words and invents no numbers.

    Exact, derived and schematic

    • exactThe frame preparation, the order of fitting, the adjustment, the bearing change, the reference numbers, the tools, the table of lengths and the Triple 635 table: the sheet and its fourth page.
    • derivedThe section drawn after the sheet’s diagram; the chainring end at the left; the nuts carrying the unit across the shell to set the chain line; the play as a wobble; the English flange line as a slip.
    • schematicEvery size, the thread, the inside of the bearings, the chainring, the crank arms, the wrenches. The sheet gives no year, torque or axle size.

    The Ebykr Digest

    A monthly letter on classic lightweight bicycles

    New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

    Double opt-in. One email per month. Unsubscribe at any time with one click.