Repair Workshop Saddles, care and lighting Brooks saddle

Repair · Saddles, care and lighting

Dress and Tension a Brooks Saddle

Brooks’s own care for a leather saddle, from its catalogs of 1933 and 1937: keep it dry, dress it lightly, let it dry in its own time, then take up the tension at the nose with a light spanner. Every instruction is from the Ebykr archive; the drawings are Ebykr’s own.

DifficultyEasyA tin, a cloth and a small spanner (Ebykr’s estimate)
StepsSixFive from Brooks, one from the Cyclo-pedia
You will needOne tool, two materialsThe list, in the sources’ terms
SourceBrooks catalogs, 1933 and 1937Records 69870 and 69885

Before you start

This page shows how a period source cared for a leather saddle, step by step, in that source’s words and figures. It does not test or guarantee any repair. Brooks itself warns of the danger of tensioning the leather too far: if you are not sure of the setting, ask a bicycle shop to check it before you ride.

On this page The drawing Tools and parts The steps in words What goes wrong Another way Sources

Escape also leaves this view.
    Drawing key
    Workbench view: one step at a time in large type, for a phone or tablet on the bench.

    Tools and parts

    In Brooks’s own terms; every item is named in its catalogs. Tick each one off as you gather it.

    Tools

    • A light spanner Brooks No. 3, or No. 5 for Champion saddles

    Brooks names nothing else.

    Parts and materials

    • Proofide Or neatsfoot oil
    • A cover for the saddle When the bicycle is turned over

    The steps in words

    The whole job, readable and printable without the drawing. Each step says what it rests on, and can take you back up to its drawing.

    Keep the leather dry

    A solid leather saddle should not be left out in the rain. Before you turn the bicycle over to mend a tire or make an adjustment, cover the top of the saddle so that it is not scuffed.

    What this step rests on
    • exact No rain, and the surface protected before the bicycle is turned over: Brooks 1937, printed page 6.
    • schematic The rain and the cover.

    Dress the leather lightly

    Now and then give the leather a dressing of Proofide, the dressing Brooks made in its own works, or of neatsfoot oil. Apply it lightly, to the surface. The dressing, Brooks says, keeps the leather supple and easy to ride, and lengthens the saddle’s life.

    What this step rests on
    • exact Proofide or neatsfoot oil, occasional dressings, supple and longer-lived: Brooks 1937, printed page 6. Lightly, to the surface: Brooks 1933, printed page 3.
    • not stated How often is “occasional” and how much is “lightly”. Brooks gives neither, so this page gives neither.

    Let it dry in its own time

    Leave the dressing to dry. Brooks is firm that the drying of leather must never be hurried in any way.

    What this step rests on

    Find the tension pin

    The saddle keeps its shape by the tension pin at its front, under the nose. The pin carries an adjusting nut: that is the provision Brooks makes for keeping the shape.

    What this step rests on
    • exact The tension pin at the front, fitted with an adjusting nut, for maintaining the shape: Brooks 1937, printed page 6.
    • schematic The shapes of the pin, the nut and the nose.

    Take up the tension with a light spanner

    Turn the adjusting nut with a light spanner, never a heavy one: a light spanner, Brooks says, prevents any danger of tensioning the leather too far. Brooks sold its own: spanner No. 3 for the tension pin and spring nuts, and No. 5 for the tension pin and clip nuts of Champion saddles.

    What this step rests on

    Set it level

    The Cyclo-pedia of 1961 adds the setting: the seat level, or tipped up very slightly, but never tipped down, which puts extra weight on the arms and wrists to keep you from sliding forward.

    What this step rests on

    What goes wrong

    Each of these is a source’s own warning, except the last, which is what the sources leave out.

    • Leather left in the rain Brooks says a solid leather saddle should not be exposed to rain.
    • A scuffed top The bicycle turned over without the saddle’s surface protected.
    • Leather hurried dry Brooks: the drying of leather must never be hastened.
    • Too much tension Taken up with too heavy a spanner; Brooks warns of the danger.
    • Sliding forward A saddle tipped down puts weight on the arms and wrists (Cyclo-pedia).

    How tight is right No source in the archive says how far to turn the nut or how to tell when to stop. This page does not either.

    The same advice in 1950

    Brooks’s 1950 leaflet

    An occasional application of Proofide keeps the leather of the saddle top supple and well preserved, the leaflet says, and the same tin serves for leather straps and shoes, at one shilling. Brooks 1950 leaflet, record 69835.

    Sources

    Every record opens in the Ebykr archive. Each step above names the page it rests on.

    Record 69885, printed page 6Brooks 1937: Care of the saddleProofide or neatsfoot oil, the tension pin and a light spanner.
    Record 69885, printed page 39Brooks 1937: spanners and ProofideSpanner No. 3 and No. 5 for the tension pin, and Proofide by the tin.
    Record 69870, printed page 3Brooks 1933: dressing a saddleProofide applied lightly and left to dry, never hurried.
    Record 69835Brooks 1950 leaflet: ProofideAn occasional application keeps the leather supple and well preserved.
    Record 71726, page 16Cyclo-pedia 1961: Cycling TipsSaddle height, and the saddle level or tipped up very slightly, never down.

    Brooks printed its care advice in its own catalogs. This page puts it in Ebykr’s own words and quotes nothing at length.

    Exact, derived and schematic

    • exactEvery instruction: no rain, the surface protected, Proofide or neatsfoot oil applied lightly, dried unhurried, the tension pin and its nut, a light spanner, spanners No. 3 and No. 5, the saddle level or very slightly tipped up.
    • derivedNothing.
    • schematicBoth drawings: the saddle’s shape, the pin, nut, spanner, tin and cloth; all motion. Ebykr’s own drawings.
    • not statedHow often, how much dressing and how far to turn the nut.

    The Ebykr Digest

    A monthly letter on classic lightweight bicycles

    New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

    Double opt-in. One email per month. Unsubscribe at any time with one click.