CampagnoloCranksets

Campagnolo Record track chainset (1051)

Cited to the catalog page In 6 catalogs, 1958 to 1982. Made in Italy.

Specification

The fields every crankset record carries. Each value names where it comes from: a catalog page, a saddle guide, a reader’s measurement or another published source. 5 of 14 fields are recorded so far; the empty rows are what the database still needs. Know one? Use Add beside the field to send it for review.

Fit and standards
Road or trackAdd
TrackCheck the scan
Campagnolo Catalogo N. 14, page 9about 1958

The transcription marks a doubtful reading on this line.

As printedpista
Track
Campagnolo Catalogo N. 15, page 9about 1967
As printedpista
Track
Campagnolo Catalogue n. 17, page 551974
As printedtrack
Track
Campagnolo 1982 catalog, page 241982
As printedtrack
Crank length mmAdd
170 mmSame in another catalog
Campagnolo Catalogo N. 14, page 25about 1958
As printedpedivelle da mm. 170
170 mmSame in another catalog
Campagnolo Catalogo N. 15, page 23about 1967
As printedpedivelle da mm. 170
170 mmSame in another catalog
Campagnolo Catalogue n. 17, page 551974
As printedcranks 170 mm
165 - 167.5 - 172.5 - 175 - 177.5 and 180On request
Campagnolo Catalogue n. 17, page 551974
As printedlengths 165 - 167,5 - 172,5 - 175 - 177,5 and 180 mm
Pedal threadAdd
9/16"x20F
Campagnolo Catalogue n. 17, page 551974
As printedpedal hole Ø 9/16" x 20F
Fixing to the spindle (cotter or taper)AddNot yet recorded
Chainrings
Chainring teethAdd
44 to 70 available
Campagnolo Catalogue n. 17, page 551974
As printedfrom 44T to 70T
ChainAdd
1" x 3/16"Check the scanSame in another catalog
Campagnolo Catalogo N. 14, page 9about 1958

The transcription marks a doubtful reading on this line.

As printedcatena passo 1" x 3/16"
1"x1/8"On requestCheck the scan
Campagnolo Catalogo N. 14, page 9about 1958

The transcription marks a doubtful reading on this line.

As printedcatena passo 1"x1/8"
1"x3/16"Same in another catalog
Campagnolo Catalogo N. 14, page 25about 1958
As printedcatena a blocchi passo 1"x3/16"
1" x 3/16"Same in another catalog
Campagnolo Catalogo N. 15, page 9about 1967
As printedcatena passo 1" x 3/16"
1" x 1/8"On request
Campagnolo Catalogo N. 15, page 9about 1967
As printedcatena passo 1" x 1/8"
1/2" x 1/8"Same in another catalog
Campagnolo Catalogue n. 17, page 551974
As printedchain 1/2" x 1/8"
1/2" x 3/32"On request
Campagnolo Catalogue n. 17, page 551974
As printedchain 1/2" x 3/32"
1/2" x 1/8"Same in another catalog
Campagnolo Catalog 17a, page 121975
As printedchain 1/2" x 1/8"
Bolt circle diameter mmAddNot yet recorded
Chainline mmAddNot yet recorded
Tread (Q factor) mmAddNot yet recorded
Construction
MaterialAddNot yet recorded
Version or finishAddNot yet recorded
Markings and date codesAddNot yet recorded
Weight and price
Weight gAddNot yet recorded
Price when newAddNot yet recorded

Add to this record

Measured one, or found a value printed somewhere? Fill in the fields you know and say how you know them. An editor checks every value before it appears, and a reader’s value is shown beside the catalog’s, never in place of it.

Add values to this record

Fill this in now. Sending it needs a free Ebykr account, and what you type is kept in this browser until you sign in.

Fit and standards
Chainrings
Construction
Weight and price
How you know

Shown with the values. Which example you measured, its year or condition, a left and right that differ.

Photo optional

Once you are signed in you can add a photo of the part on the caliper or the scale, or of the marking.

Sending needs a free Ebykr account so an editor can ask you about a value. What you type stays in this browser while you sign in.

Sign in to send Create a free account

Nothing appears on the page until an editor approves it.

In the catalogs

Not in the archive’s transcription of Campagnolo Catalogo N. 13 (about 1956); first printed in Campagnolo Catalogo N. 14 (about 1958). A missing part is missing from the pages the archive holds, which is not proof that it was not made then.

The pages it is printed on

Each picture is the catalog page itself; open one to read it at full size in the archive.

Campagnolo Record track chainset (1051) in Campagnolo Catalogo N. 14, page 9
about 1958, page 9
Campagnolo Record track chainset (1051) in Campagnolo Catalogo N. 14, page 25
about 1958, page 25
Campagnolo Record track chainset (1051) in Campagnolo Catalogo N. 15, page 9
about 1967, page 9
Campagnolo Record track chainset (1051) in Campagnolo Catalogo N. 15, page 23
about 1967, page 23
Campagnolo Record track chainset (1051) in Campagnolo Catalogue No. 16 (English edition), page 9
about 1969, page 9
Campagnolo Record track chainset (1051) in Campagnolo Catalogue No. 16 (English edition), page 23
about 1969, page 23
Campagnolo Record track chainset (1051) in Campagnolo Catalogue n. 17, page 55
1974, page 55
Campagnolo Record track chainset (1051) in Campagnolo Catalogue n. 17, page 58
1974, page 58
Campagnolo Record track chainset (1051) in Campagnolo Catalog 17a, page 12
1975, page 12
Campagnolo Record track chainset (1051) in Campagnolo 1982 catalog, page 9
1982, page 9
Campagnolo Record track chainset (1051) in Campagnolo 1982 catalog, page 24
1982, page 24

As each catalog named it

about 1958
1051 Guarnitura pista (ingranaggio per catena passo 1" x 3/16". - Su richiesta si fornisce con ingranaggio per catena passo 1"x1/8" oppure 1/2"x1/8"). - Nella richiesta specificare il numero dei denti dell'ingranaggio e la lunghezza delle pedivelle, vedi pag. 22[?] page 9
1051 Guarnitura pista (salvo indicazioni contrarie, viene fornita con pedivelle da mm. 170 e con ingranaggio per catena a blocchi passo 1"x3/16" (mm. 4,6), con 24 denti page 25
about 1967
1051 Guarnitura pista (ingranaggio per catena passo 1" x 3/16". - Su richesta si fornisce con ingranaggio per catena passo 1" x 1/8" oppure 1/2" x 1/8"). - Nella richiesta specificare il numero dei denti dell'ingranaggio e la lunghezza delle pedivelle, vedi pag. 21. page 9
1051 Guarnitura pista (salvo indicazioni contrarie, viene fornita con pedivelle da mm. 170 e con ingranaggio per catena a blocchi passo 1" x 3/16" (mm. 4.6), con 24 denti page 23
about 1969
1051 Track chainwheel set (chainring for chain 1" × 3/16" - Available also for chains 1" × 1/8" or 1/2" × 1/8"). - Please specify number of chainring teeth and cranks length - see page 21) page 9
1051 Track chainwheel set (unless otherwise requested it will be supplied with 170 mm. cranks and with 24 teeth chainrings for 1" × 3/16" (4,6 mm.) chain) page 23
1974
1051 Record track chainset (with cranks 170 mm., pedal hole Ø 9/16" x 20F. and chainring for chain 1/2" x 1/8" [3 mm.]). Specify the number of teeth of the chainring available from 44T to 70T. Upon request furnished cranks with lengths 165 - 167,5 - 172,5 - 175 - 177,5 and 180 mm. and chainring for chain 1/2" x 3/32" (2 mm.). P.S.: For the sprockets see page 81 page 55
1051 Record track chainset (with cranks 170 mm., pedal hole Ø 9/16" x 20F. and chainring for chain 1/2" x 1/8" [3 mm.]). Specify the number of teeth of the chainring available from page 58
1975
1051 Track chainwheel set (chainring for chain 1/2" x 1/8" - Available also for chains 1" x 1/8" or 1" x 3/16" - Please specify number of chainring teeth and crank length - see page 27) page 12
1982
1051 Record Chainwheel set. Arms 165, 167.5, 170, 172.5, 175, 177.5 and 180mm. Chainrings 44T to 57T, ½" × ⅛". page 9
1051 Record track page 24

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.