About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
CampagnoloCranksets
Cited to the catalog page In 6 catalogs, 1958 to 1982. Made in Italy.
The fields every crankset record carries. Each value names where it comes from: a catalog page, a saddle guide, a reader’s measurement or another published source. 5 of 14 fields are recorded so far; the empty rows are what the database still needs. Know one? Use Add beside the field to send it for review.
| Fit and standards | |
|---|---|
| Road or track | Add |
| Crank length mm | Add 170 mmSame in another catalog Campagnolo Catalogo N. 14, page 24about 1958As printedpedivelle da mm. 170 170 mmSame in another catalog Campagnolo Catalogo N. 15, page 22about 1967As printedpedivelle da mm. 170 165 - 167.5 - 172.5 - 175 - 177.5 and 180On request Campagnolo Catalogue n. 17, page 471974As printedlengths 165 - 167,5 - 172,5 - 175 - 177,5 and 180 mm |
| Pedal thread | Add |
| Fixing to the spindle (cotter or taper) | AddNot yet recorded |
| Chainrings | |
| Chainring teeth | Add 47-50 suppliedSame in another catalog Campagnolo Catalogo N. 14, page 24about 1958As printedcon 47-50 denti 47-50 suppliedSame in another catalog Campagnolo Catalogo N. 15, page 22about 1967As printedcon 47-50 denti 42 to 57 availableAnother catalog prints otherwise Campagnolo Catalogue n. 17, page 401974As printedfrom 42T to 57T |
| Chain | Add 1/2" x 3/32"Same in another catalog Campagnolo Catalogo N. 14, page 24about 1958As printedcatena normale passo 1/2" x 3/32" 1/2" x 3/32"Same in another catalog Campagnolo Catalogo N. 15, page 22about 1967As printedcatena normale passo 1/2" x 3/32" 1/2" x 3/32"Same in another catalog Campagnolo Catalogue n. 17, page 401974As printedchain 1/2" x 3/32" |
| Bolt circle diameter mm | AddNot yet recorded |
| Chainline mm | AddNot yet recorded |
| Tread (Q factor) mm | AddNot yet recorded |
| Construction | |
| Material | AddNot yet recorded |
| Version or finish | AddNot yet recorded |
| Markings and date codes | AddNot yet recorded |
| Weight and price | |
| Weight g | AddNot yet recorded |
| Price when new | AddNot yet recorded |
Measured one, or found a value printed somewhere? Fill in the fields you know and say how you know them. An editor checks every value before it appears, and a reader’s value is shown beside the catalog’s, never in place of it.
Not in the archive’s transcription of Campagnolo Catalogo N. 13 (about 1956); first printed in Campagnolo Catalogo N. 14 (about 1958). A missing part is missing from the pages the archive holds, which is not proof that it was not made then.
Each picture is the catalog page itself; open one to read it at full size in the archive.
| about 1958 | 1049 Guarnitura strada (nella richiesta specificare il numero dei denti degli ingranaggi e la lunghezza delle pedivelle, vedi pag. 22) page 7 1049 Guarnitura strada (salvo indicazioni contrarie, viene fornita con pedivelle da mm. 170 e con ingranaggi per catena normale passo 1/2" x 3/32" (mm. 2), con 47-50 denti. page 24 |
|---|---|
| about 1967 | 1049 Guarnitura strada (nella richiesta specificare il numero dei denti degli ingranaggi e la lunghezza delle pedivelle, vedi pag. 20) page 7 1049 Guarnitura strada (salvo indicazioni contrarie, viene fornita con pedivelle da mm. 170 e con ingranaggi per catena normale passo 1/2" x 3/32" (mm. 2), con 47-50 denti. page 22 |
| about 1969 | 1049 Road chainwheel set (please specify number of chainring teeth and cranks length - see page 20) page 7 1049 Road chainwheel set (unless otherwise requested the set will be supplied with 170 mm. cranks and with 47-50 teeth chainrings for 1/2" × 3/32" chain) page 22 |
| 1974 | 1049 Record road chainset (with crank 170 mm. pedal hole Ø 9/16" x 20F. and chainrings for chain 1/2" x 3/32" [2 mm.]). Specify the number of teeth of the chainrings available from 42T to 57T. Upon request furnished cranks with lenghts 165 - 167,5 - 172,5 - 175 - 177,5 and 180 mm. page 40 1049 Record road chainset (with cranks 170 mm., pedal hole Ø 9/16" x 20F. and chainrings for chain 1/2" x 3/32" [2 mm]). Specify the number of teeth of the chainrings available from 42T to 57T. Upon request furnished cranks with lengths 165 - 167,5 - 172,5 - 175 - 177,5 and 180 mm. page 47 1049/3 Record road chainset for normal triple chainring (with cranks 170 mm., pedal hole Ø 9/16" x 20F. and chainrings for chain 1/2" x 3/32" [2 mm.]). Specify the number of teeth of the 3 chainrings available from 42T to 57T. Upon request page 80 1049/5 Triple Record chainset (with cranks 170 mm., pedal hole Ø 9/16" x 20F. and chainrings for chain 1/2" x 3/32" (2 mm). with small ring in 36T only. Specify the number of the other two chainrings available from 42T to 57T page 82 |
| 1975 | 1049 Road chainwheel set (please specify number of chainring teeth and crank length—see page 27) page 8 |
| 1982 | 1049 Record Chainwheel set. Arms 165, 167.5, 170, 172.5, 175, 177.5 and 180mm. Chainrings 41T to 57T, ½" × ³⁄₃₂". page 6 1049 Record road page 24 1049/3 Record triple 42 teeth low* page 24 1049/4 Record cyclocross* page 24 |
The Ebykr Digest
New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.
Double opt-in. One email per month. Unsubscribe at any time with one click.