Reynolds 531 Tube Drawings — Chain Stay 515, Seat Stay 614 and Fork Blade 418 B

Three Reynolds Tube Co. drawings of 531 stays and a fork blade for a customer, each stamped for the buyer’s acceptance. The date boxes are blank.

— Page 1 —
DRAWING NO 515 D/D.S [struck through by hand] TITLE CHAIN STAY
O/D 12 ±0·25
400 +1·5 -0
70 (Ref)
40 ±3·0 parallel.
‘X’ ‘X’
ø 22 +0·13 -0·03
SECTION X X
+0·25 -0
OFFSET TOL: 0·2
+1·0 -0
REF
D.=DOMED ONLY. [struck through by hand]
D.S=DOMED AND SLOTTED. [struck through by hand]
ALTERNATIVE END FORM. [struck through by hand]
ROUND-OVAL-ROUND
ISSUE Nº | DATE
TITLE CHAIN STAY
CUSTOMER A.I.
DRAWN J.F.I.
CHECKED
SCALE N.T.S.
MADE FROM ø 22 x 21 Swg x 410 LONG
SPEC. 531
DRAWING NO 515 D/D.S [struck through by hand]
REYNOLDS TUBE CO. LTD.
REDFERN ROAD
BIRMINGHAM B11 2BG
ENGLAND.

[Dyeline drawing of a Reynolds 531 round-oval-round chain stay, 400 mm long, with an ovalized section X X and an alternative domed or slotted end form, in a Reynolds Tube Co. title block. Blue pen strokes cross out the alternative end form and the D/D.S suffix of the drawing number; a red rubber stamp reads “This design is accepted and is deemed [partly faint] to be that of the buyer and not of Reynolds Tube Co. Ltd. Please sign one copy and return immediately. Signed … Date … For and on behalf of …”, left blank.]

— Page 2 —
DRAWING NO 614 D/D.S [struck through by hand] TITLE SEAT STAY
O/D 11 ±0·25
625 +1·5 -0
380 – 355
‘X’ ‘X’
ø 14 +0·13 -0·03
SECTION X X
+0·25 -0
OFFSET TOL: 0·2
+1·0 -0
REF
D.= DOMED ONLY. [struck through by hand]
D.S.= DOMED AND SLOTTED. [struck through by hand]
ALTERNATIVE END FORM. [struck through by hand]
ISSUE Nº | DATE
TITLE SEAT STAY.
CUSTOMER A.I.
DRAWN JFI
CHECKED
SCALE NTS
MADE FROM ø 14 x 20Swg x 635 LONG.
SPEC. 531
DRAWING NO 614 D/D.S [struck through by hand]
REYNOLDS TUBE CO. LTD.
REDFERN ROAD
BIRMINGHAM B11 2BG
ENGLAND.

[Dyeline drawing of a Reynolds 531 tapered seat stay, 625 mm long with a round section X X and an alternative domed or slotted end form, in a Reynolds Tube Co. title block. Blue pen strokes cross out the alternative end form and the D/D.S suffix of the drawing number; a red rubber stamp reads “This design is accepted and is deemed to be that of the buyer and not of Reynolds Tube Co. Ltd. Please sign one copy and return immediately. Signed … Date … For and on behalf of …”, left blank.]

— Page 3 —
DRAWING NO 418 D/D.S [struck through by hand] TITLE ‘B’ FORK
360 +2·0 -0
O/D 13 ±0·25
‘A’
RAKE Nº 14
30 +1·5 -0
60 ±3·0 parallel.
‘X’ ‘X’
16·5
28·5
SECTION X-X
+0·25 -0
OFFSET TOL: 0·2
+1·0 -0
REF
IN STRAIGHT.
D=DOMED ONLY. [struck through by hand]
D.S.=DOMED AND SLOTTED. [struck through by hand]
ALTERNATIVE END FORM ON ARROW ‘A’ [struck through by hand]
ISSUE Nº | DATE
TITLE ‘B’ FORK
CUSTOMER A.I.
DRAWN JFI
CHECKED
SCALE N.T.S.
MADE FROM ø 23·1 x 18/21 G x370 Long.
SPEC. 531
DRAWING NO 418 D/D.S [struck through by hand]
REYNOLDS TUBE CO. LTD.
REDFERN ROAD
BIRMINGHAM B11 2BG
ENGLAND.

[Dyeline drawing of a Reynolds 531 ‘B’ fork blade, 360 mm long with rake No. 14, an oval section X-X of 16.5 by 28.5 and an alternative domed or slotted end form, in a Reynolds Tube Co. title block. Blue pen strokes cross out the alternative end form and the D/D.S suffix of the drawing number; a faint red rubber stamp, cut off at the right edge, reads “This design is accepted and is dee[med] to be that of the buyer and not of Reyn[olds] Tube Co. Ltd. Please sign one copy … return immediately. Signed … Date … For and on behalf of …”, left blank.]