Brampton (Undated) Leaflet — Phoenix Lightweight Lug Sets and Bramweld Bottom Bracket Shells

— Page 1 —
BRAMPTON FITTINGS LTD
BRAMPTON · ENGLAND
PHOENIX
LIGHTWEIGHT
LUG SETS

[Front cover of a Brampton Fittings Ltd leaflet on Phoenix lightweight lug sets, with five photographed lugs (head lug, bottom bracket shell and seat lug) stacked on a red ground around a white band carrying the title and the Brampton connecting-rod emblem. The company name runs vertically up the left edge.]

— Page 2 —
THE NUMBERS on the left hand side of the columns indicate the feature cut designs illustrated. Those on the right refer to the same lug with an alternative pipe design. Design numbers should always be quoted when ordering.
DESIGN Nos. 300—306 & 340—346
This series can be supplied with centre spear point shortened as shown by dotted line on Design No. 306. When ordering this feature cut the numbers shown against the lugs should be followed by the letter A, i.e., 306A, indicating the lug with the shortened spear point.
DESIGN No. OF FEATURE CUT LUG ILLUSTRATED | DESIGN No. WITH ALT. PIPE AS No. 320
300 | 340
301 | 341
302 | 342
303 | 343
304 | 344
305 | 345
306 | 346
DESIGN No. OF FEATURE CUT LUG ILLUSTRATED | DESIGN No. WITH ALT. PIPE AS No. 300
320 | 330
321 | 331
322 | 332
323 | 333
324 | 334

[Page of Phoenix lug feature-cut line drawings on a red and white ground, showing head lugs in front and side views numbered 300 to 306 with alternates 340 to 346, and 320 to 324 with alternates 330 to 334. An ordering note explains the design numbers and the letter A for a shortened spear point.]

— Page 3 —
DESIGN No. OF FEATURE CUT LUG ILLUSTRATED | DESIGN No. WITH ALT. PIPE AS No. 320
310 | 350
311 | 351
312 | 352
313 | 353
314 | 354
315 | 355
316 | 356
DESIGN No. OF FEATURE CUT LUG ILLUSTRATED | DESIGN No. WITH ALT. PIPE AS No. 320
307 | 327
308
318
328
329
309
319

[Page of Phoenix lug feature-cut line drawings in two columns: head lug side views numbered 310 to 316 with alternates 350 to 356 on red, and bottom bracket shell and head lug drawings numbered 307, 308, 318, 328, 329, 309 and 319 on white. A faint rectangular outline surrounds the upper right drawings, and a dashed line crosses the white half.]

— Page 4 —
PHOENIX
LIGHTWEIGHT LUG SETS
This new development of Bramptons has created considerable interest in the cycle trade as it is the first time that such a range of 18G lightweight lugs has been produced by a British manufacturer.
The illustrations show the large variety of patterns available and indicate the alternative feature cuts on the pipes of the lugs. Such a range will enable the cycle manufacturer who wishes to give individuality to his cycle to select one of the designs from the large number of attractive combinations which have been evolved.
All designs are available in the following range of angles :—
TOP LUGS : 68° to 74° (1¼” × 1″)
BOTTOM LUGS : 58° to 64° (1¼” × 1⅛”)
SEAT LUGS : 69° to 73° (1⅛” × 1″ × 3/16″ dia. spigots)
CROWNS are of pressed steel
BRAMWELD BOTTOM BRACKET SHELLS
Bramweld, the Brampton pressed steel bottom bracket, has necessitated the development of an entirely new manufacturing technique which has resulted in the lightest, strongest bracket of its type yet produced. It is lighter yet stronger than the more usual cast bracket and it saves finishing time because it is supplied in a much cleaner and smoother condition. The bracket is available in the following sizes :—
FOR ⅞” CHAIN STAYS : PBS040. | 67° × 62¾°, Straight Pattern
PBS044. | 69° × 62°, Straight Pattern
PBS128. | 10° “V” Pattern, 66° × 58°
PBS290. | 12° “V” Pattern, 62½° × 62¼°
PBS292. | 10° “V” Pattern, 63° × 63°
FCR ¾” CHAIN STAYS : PBS233. | 12° “V” Pattern, 63° × 63°
PBS291. | 12° “V” Pattern, 62½° × 62°
All to suit 1⅛” × 1⅛” tubing. The standard length of pipes is ¾” but this can be shortened to requirements.
All the components illustrated and listed above are those which are now available, but variations of the designs shown, or of the angles in the case of bottom bracket shells, can be supplied exclusively if sufficient quantities are ordered. It is anticipated, however, that the above range will cover most requirements.
BRAMPTON · ENGLAND
BRAMPTON FITTINGS LTD.
with which is associated Walton & Brown Ltd.
PHOENIX WORKS · DOWNING STREET · HANDSWORTH · BIRMINGHAM

[Text page headed Phoenix Lightweight Lug Sets, giving the range of angles for top, bottom and seat lugs and a list of Bramweld bottom bracket shells PBS040 to PBS291. The Brampton connecting-rod emblem and the Phoenix Works address close the page. Faint pink marks near the top, possibly show-through, cannot be read.]