· United States · 1978 catalog, year printed in the book

1978 Klein Team Super Frameset, 1978

Printed as 1978 KLEIN TEAM SUPER FRAMESET, model B-10, on page 7 of the 1978 catalog. The Showroom files it under the TEAM SUPER family, a grouping made by Ebykr and not by the catalog.

This model in other years

  1. 1978
  2. 1981
  3. 1989

In 3 of Klein’s 3 catalog years. All Klein years

This copy has no photograph of the model: its page is not among the pages held.

At a glance

Model number
B-10
Versions
  • Frameset 51.0 cm, 54.0 cm, 57.0 cm, 59.0 cm, 61.0 cm, 64.0 cm
  • Team Super Bicycle B-10 · B-10
Weight
3.28 lbs

From the catalog

The Klein Team Super is the stiffest, most efficient bicycle frame made in the world today.1978 catalog, p. 7

No price printed: the archive holds no United States price sheet for 1978.

Specification as printed

Every row is the catalog’s own wording, from page 7 of the 1978 catalog.

Row1978 catalog, p. 7
TubingHigh strength aluminum-magnesium alloy in optimized diameters. Down tube and top tube are 1.5" diameter, seat tube is 1.25" diameter. Chain stays are internally tapered. The head tube (except on 51 cm.) and bottom bracket shell are double butted.
Boron fiber reinforcementsare used on chain stays, seat stays and fork blades. They serve two important functions. First, the fiber pattern is oriented to stiffen these tubes against lateral deflection. This is most beneficial on the chain stays and fork blades which are "lateral stiffness critical" (typically weak points in over-all frame side-to-side stiffness). The second advantage is that boron composite absorbs high frequency shock about ten times better than conventional stuructural materials, so it effectively dampens road shock transmitted through forks and seat stays for an exceptionally smooth ride.
WeightBare weight of a 57 cm frame is 3.28 lbs. This is one full pound less than the best steel frames.
ConstructionTubing is precisely mitered in special milling fixtures, then arranged in an elaborate precision jig which rigidly and accurately aligns every tube. Frames are tungsten/inert gas welded, then fully heat treated. The exclusive heat treating process causes the grain structure of the alloy to flow into a uniform unbroken pattern throughout the entire frame. This completely relieves welding stresses, improves the temper of the alloy and increases its fatigue resistance and strength. Boron fiber reinforcements are permanently joined to the frame during heat treatment. This method of construction is far superior to brazing or typical welding methods and produces a frame with no inherent weak points; specifically: a) Welds and weld areas are at least as strong and fatigue resistant as non-weld areas. (Brazed frames are weakened at the joint, requiring lugs and double butted or heavy tubing for adequate strength). b) There is no braze material to fatigue. c) Joints can not creep or come loose as frames joined with epoxy sometimes do.
Standard equipmentCampagnolo Super Record headset, boron reinforced Columbus fork, Shimano Dura-Ace brazed-on down tube shifters, sealed bottom bracket and axle assembly, water bottle mounts, stainless steel derailler cable stop and seat clamp bolt.
FinishSurface is sandblasted, chemically etched and Alodine electroless anodized for maximum adhesion. Frame is then primed with DuPont Corlar epoxy zinc chromate, hand sanded, painted with a DuPont Imron metallic color and Imron clear coated.
Sealed bottom bracket unituses oversize 203PP precision bearings rated at 1140 lbs. continuous load each. Axle has standard taper which will accommodate Campagnolo, Shimano Dura-Ace and Campagnolo equivalent cranks (double and single chainrings).
Forksare made with Columbus blades, T.I./Haden investment cast Europa crowns and Shimano SF tips. They are fully jig built. Fork blades are boron reinforced after brazing. Fork crown race is lathe cut for precision headset alignment.
Klein vertical dropoutsare designed for positive wheel retention and quick wheel change. Hanger threading is standard 10 by 1 mm.
Tire clearancesare for tubular tires only.
Seat post sizeis 27.4 mm. Seat posts optional.
Size (cm)51.0 | 54.0 | 57.0 | 59.0 | 61.0 | 64.0
Size (inch)20.1 | 21.3 | 22.4 | 23.2 | 24.0 | 25.2
Head angle72.3° | 73.0° | 73.6° | 74.1° | 74.5° | 75.0°
Seat angle72.5° | 72.5° | 72.5° | 72.5° | 72.5° | 72.5°
Wheelbase (cm)95.0 | 96.3 | 97.4 | 98.0 | 98.5 | 99.4
Wheelbase (inch)37.4 | 37.9 | 38.3 | 38.6 | 38.8 | 39.1
Fork rake (cm)3.8 | 3.8 | 3.8 | 3.8 | 3.8 | 3.8
Fork rake (inch)1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5
Hanger drop (cm)7.2 | 6.9 | 6.3 | 6.1 | 6.0 | 5.8
Hanger drop (inch)2.8 | 2.7 | 2.5 | 2.4 | 2.4 | 2.3
Bottom bracket height (cm)26.8 | 27.1 | 27.7 | 27.9 | 28.0 | 28.1
Bottom bracket height (inch)10.6 | 10.7 | 10.9 | 11.0 | 11.0 | 11.1
Chainstay length (cm)41.3 | 41.3 | 41.3 | 41.3 | 41.3 | 41.3
Chainstay length (inch)16.3 | 16.3 | 16.3 | 16.3 | 16.3 | 16.3
Top tube length (cm)52.8 | 54.4 | 55.9 | 56.9 | 57.7 | 59.2
Top tube length (inch)20.8 | 21.4 | 22.0 | 22.4 | 22.7 | 23.3
Weight bare frame w/o fork or bb axle (lbs)3.1 | 3.2 | 3.3 | 3.4 | 3.5 | 3.7

Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.

Readings to check against the scan

  • No whole-bicycle photograph: the cover and the back cover each show only half of the bicycle, and page 12 shows frame details, so photo is null.
  • The specification is the labelled paragraphs of the page 7 sheet (a prose sheet) plus the page 9 frame-geometry table by frame size; rows from page 9 carry their own page number. The paragraphs headed Power efficiency and Let's talk Boron, and the warranty, are sales argument and are not entered as specification rows.
  • Weight: the sheet prints 3.28 lbs as the bare weight of a 57 cm frame (page 7); the page 9 table prints 3.3 lbs for 57.0 cm and calls it the bare frame without fork or bb axle.
  • The frameset (page 7) and the complete bicycle B-10 (back cover, page 13) are entered as two versions of one model because both are named Team Super; the book gives the bicycle no specification of its own beyond the frameset's standard equipment.
Page 7 of the 1978 catalog

Page 7 of 13 pages held. Open it in the archive

The TEAM SUPER through the books

Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

  1. 1978

    1978 Klein Team Super Frameset

    B-10

  2. Team Super, as pictured in the 1981 catalog

    1981

    Team Super

  3. 1989

    Team Super

Around this model-year

What else Ebykr holds on it.

Help fill the record

Four things the archive does not yet hold for this model-year, and where a reader can add to each.

Back to the 1978 range

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.