· England · 1951 catalog, year printed in the book

The "Massed Start" model, 1951

Printed as The "Massed Start" model, models 42 and 42a, on page 9 of the 1951 catalog. The Showroom files it under the Mass Start / Massed Start family, a grouping made by Ebykr and not by the catalog.

This model in other years

  1. 1939
  2. 1951
  3. 1952
  4. 1953
  5. 1954

In 5 of Claud Butler’s 10 catalog years. All Claud Butler years

The "Massed Start" model, as pictured in the 1951 catalog
A dark-finished bicycle with a script transfer on the down tube, drop handlebars, rear derailleur, mudguards and a leather saddle, three-quarter front view. Cut from page 9 of the 1951 catalog. Scan: 2velo.com (Claud Butler catalog index). Open the book in the archive

At a glance

Model numbers
42, 42a
Versions
  • Frame set · 42
  • Complete machine, no gear · 42a · fixed cog and two brakes, no gear
Weight
24 lbs. single speed (2 brakes)

From the catalog

Because of his wide knowledge and experience in the purchase of lightweight machines it is the hardened clubman who will appreciate most the obvious skill of the master craftsman1951 catalog, p. 9

Price when new

43s 17dcomplete bicycle (including £8 6 0 Tax)

Printed as complete machine, basic price, no gear on page 9 of the 1951 catalog.

Printed in pounds and shown as printed. The Showroom does not convert it: its price index and wage figures are American, so a figure in pounds has no honest counterpart in 2026 dollars or in weeks of an average wage.

Also on the sheet: FRAME SET 15s 17d.

Specification as printed

Every row is the catalog’s own wording, from page 9 of the 1951 catalog.

Row1951 catalog, p. 91939 catalog, p. 17Comparison
FRAME SETBrazed lug construction incorporating taper gauge high grade steel lugs and bracket shells [?] of an entirely new and superior type far in advance of the hitherto widely used malleable cast iron lugs. Cutaway design as Fig. 5, page 3, Reynolds "531" double butted top and down tubes, single butted seat tube, taper gauge ½" dia. seat stays, oval section chain stays (no indents) and fork blades (latter with finely tapered though sturdy gauge ¾" [?] dia. round section at tips). Drop forged steel fork crown and ends. Seat stays with long chamfered tops "wrapped" over at seat cluster (Fig. 3, page 3). Mudguard eyes incorporated with fork ends front and rear. No lamp boss unless specially requested. C.B. detachable spring steel pump clips. Two cable stops for rear brake. Cable stop for gear wire near rear end of chain stay. Gear wire pulley (detachable) at bracket. Control lever boss or cable stop for handlebar gear control at front end of down tube optional. Curved seat stay bridge with reinforced brake bolt hole and decorative reinforcing plates to seat stays each end of bridge. Fork crown drilled for brake. Gnutti Decagon head fittings. Gnutti bottom bracket fittings with hollow axle (either standard 1½" chain line, or G.C.C. for double chainwheel set). Alloy seat pin. Weight, 6½ lbs.No such rowNot comparable
CHAINWHEEL AND CRANKSGnutti 3-pin steel. Chrome plated. ½" x ⅛" or ½" x 3/32".Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel.Different wording
HUBSBritish Hub Co. "Airlite" Continental (large flange) or equivalent.No such rowNot comparable
RIMSDunlop "Special Lightweight" (High Pressure) stainless steel, 27".27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings.Names another maker
SPOKESDouble butted 15/17G. Rustless.No such rowNot comparable
TYRESDunlop "Ultra-Light Road Racing" (High Pressure).27in. (nominal diameter) oversize High Pressure.Different wording
GEARINGSimplex, Huret or Benelux rear derailleur with or without chainwheel derailleur—entirely to choice.No such rowNot comparable
WING NUTSHuret Bronze-de-Luxe chrome plated, G.B. lever nuts or Track nuts to choice.No such rowNot comparable
CHAINRenolds ½" x ⅛" or as required to suit gearing.Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model).Different wording
PEDALSLyotard Faucheaux or as specified."Lyotard" solid centre quill chromium-plated.Different wording
HANDLEBARSAs illustrated, alloy bend with steel stem, or to choice.1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs.Different wording
BRAKESG.B. "Coureur" pattern alloy front and rear or as specified.Front and rear "Lam" duralumin with neat "hooded" style levers.Different wording
SADDLEBrooks B 57 or to choice.Brooks "B.17 Flyer" or to order on Brooks combination seat pin.Different wording
MUDGUARDSContinental section polished alloy.No such rowNot comparable
PUMPAluminium alloy, 18" with "Presta" valve connection.No such rowNot comparable
FINISHAs desired, but price below based on: "Bonderized" throughout, stoved three coats C.B. famous glass-hard enamel, lug edges delicately picked out in contrasting colour, usual name transfers and one coat of clear lacquer over all. Fork crown chromium plated. Quotations for alternative finishes with pleasure."C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts.Different wording
FRAMENot in this book’s specificationBuilt with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres.Not comparable
FORKSNot in this book’s specificationTaper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade.Not comparable
GEARNot in this book’s specificationSimplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control.Not comparable
MUDGUARD EXTENSIONNot in this book’s specificationDuralumin Continental type as illustrated.Not comparable
LUBRICATIONNot in this book’s specificationBy "C.B." force-feed system.Not comparable
EQUIPMENTNot in this book’s specificationIncludes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner.Not comparable
*Not in this book’s specificationPump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over.Not comparable

1 row names another maker, 8 are worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 11 years between the 1939 and 1951 books, so a difference may date from any of them as well.

Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.

Readings to check against the scan

  • Complete machine is priced as a basic figure with no gear; the page invites quotations for other specifications.
Page 9 of the 1951 catalog

Page 9 of 17 pages held. Open it in the archive

The Mass Start / Massed Start through the books

Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

  1. 1936not in this book
  2. "C.B." MASS-START Model, as pictured in the 1939 catalog

    1939

    "C.B." MASS-START Model

  3. 1949cannot tell: part of the book
  4. The "Massed Start" model, as pictured in the 1951 catalog

    1951

    The "Massed Start" model

    42 · 42a

  5. The "Massed Start" model, as pictured in the 1952 catalog

    1952

    The "Massed Start" model

    51

  6. The 'Massed Start' model, as pictured in the 1953 catalog

    1953

    The 'Massed Start' model

    51

  7. The 'Massed Start' model, as pictured in the 1954 catalog

    1954

    The 'Massed Start' model

    51

  8. 1955cannot tell: part of the book
  9. 1961 to 1977not in these two books

Around this model-year

What else Ebykr holds on it.

Help fill the record

Four things the archive does not yet hold for this model-year, and where a reader can add to each.

Back to the 1951 range

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.