About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
· England · 1939 catalog, year printed in the book
Printed as "C.B." MASS-START MODEL
, on page 17 of the 1939 catalog. The Showroom files it under the Mass Start / Massed Start family, a grouping made by Ebykr and not by the catalog.
This model in other years
In 5 of Claud Butler’s 10 catalog years. All Claud Butler years

The new "C.B." Low Temperature Welding process (the subject of prolonged research and experimental work) preserves all the essential properties of the frame tubing, cuts down the area of tube to be heated,1939 catalog, p. 17
£13 18s 6dcash price, Four-speed model
Printed as "C.B." MASS-START MODEL
on page 17 of the 1939 catalog.
Printed in pounds and shown as printed. The Showroom does not convert it: its price index and wage figures are American, so a figure in pounds has no honest counterpart in 2026 dollars or in weeks of an average wage.
Also on the sheet: Three-speed model £13 15s; £5 15s.
Every row is the catalog’s own wording, from page 17 of the 1939 catalog.
| Row | 1939 catalog, p. 17 |
|---|---|
| FRAME | Built with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres. |
| FORKS | Taper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade. |
| WHEELS | 27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings. |
| GEAR | Simplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control. |
| CHAINWHEEL AND CRANKS | Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel. |
| TYRES | 27in. (nominal diameter) oversize High Pressure. |
| CHAIN | Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model). |
| HANDLEBARS | 1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs. |
| BRAKES | Front and rear "Lam" duralumin with neat "hooded" style levers. |
| MUDGUARD EXTENSION | Duralumin Continental type as illustrated. |
| SADDLE | Brooks "B.17 Flyer" or to order on Brooks combination seat pin. |
| PEDALS | "Lyotard" solid centre quill chromium-plated. |
| LUBRICATION | By "C.B." force-feed system. |
| EQUIPMENT | Includes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner. |
| FINISH | "C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts. |
| * | Pump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over. |
| Row | 1939 catalog, p. 17 | 1951 catalog, p. 9 | Comparison |
|---|---|---|---|
| FRAME | Built with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres. | No such row | Not comparable |
| FORKS | Taper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade. | No such row | Not comparable |
| WHEELS | 27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings. | Dunlop "Special Lightweight" (High Pressure) stainless steel, 27". | Names another maker |
| GEAR | Simplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control. | No such row | Not comparable |
| CHAINWHEEL AND CRANKS | Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel. | Gnutti 3-pin steel. Chrome plated. ½" x ⅛" or ½" x 3/32". | Different wording |
| TYRES | 27in. (nominal diameter) oversize High Pressure. | Dunlop "Ultra-Light Road Racing" (High Pressure). | Different wording |
| CHAIN | Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model). | Renolds ½" x ⅛" or as required to suit gearing. | Different wording |
| HANDLEBARS | 1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs. | As illustrated, alloy bend with steel stem, or to choice. | Different wording |
| BRAKES | Front and rear "Lam" duralumin with neat "hooded" style levers. | G.B. "Coureur" pattern alloy front and rear or as specified. | Different wording |
| MUDGUARD EXTENSION | Duralumin Continental type as illustrated. | No such row | Not comparable |
| SADDLE | Brooks "B.17 Flyer" or to order on Brooks combination seat pin. | Brooks B 57 or to choice. | Different wording |
| PEDALS | "Lyotard" solid centre quill chromium-plated. | Lyotard Faucheaux or as specified. | Different wording |
| LUBRICATION | By "C.B." force-feed system. | No such row | Not comparable |
| EQUIPMENT | Includes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner. | No such row | Not comparable |
| FINISH | "C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts. | As desired, but price below based on: "Bonderized" throughout, stoved three coats C.B. famous glass-hard enamel, lug edges delicately picked out in contrasting colour, usual name transfers and one coat of clear lacquer over all. Fork crown chromium plated. Quotations for alternative finishes with pleasure. | Different wording |
| * | Pump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over. | No such row | Not comparable |
| FRAME SET | Not in this book’s specification | Brazed lug construction incorporating taper gauge high grade steel lugs and bracket shells [?] of an entirely new and superior type far in advance of the hitherto widely used malleable cast iron lugs. Cutaway design as Fig. 5, page 3, Reynolds "531" double butted top and down tubes, single butted seat tube, taper gauge ½" dia. seat stays, oval section chain stays (no indents) and fork blades (latter with finely tapered though sturdy gauge ¾" [?] dia. round section at tips). Drop forged steel fork crown and ends. Seat stays with long chamfered tops "wrapped" over at seat cluster (Fig. 3, page 3). Mudguard eyes incorporated with fork ends front and rear. No lamp boss unless specially requested. C.B. detachable spring steel pump clips. Two cable stops for rear brake. Cable stop for gear wire near rear end of chain stay. Gear wire pulley (detachable) at bracket. Control lever boss or cable stop for handlebar gear control at front end of down tube optional. Curved seat stay bridge with reinforced brake bolt hole and decorative reinforcing plates to seat stays each end of bridge. Fork crown drilled for brake. Gnutti Decagon head fittings. Gnutti bottom bracket fittings with hollow axle (either standard 1½" chain line, or G.C.C. for double chainwheel set). Alloy seat pin. Weight, 6½ lbs. | Not comparable |
| HUBS | Not in this book’s specification | British Hub Co. "Airlite" Continental (large flange) or equivalent. | Not comparable |
| SPOKES | Not in this book’s specification | Double butted 15/17G. Rustless. | Not comparable |
| GEARING | Not in this book’s specification | Simplex, Huret or Benelux rear derailleur with or without chainwheel derailleur—entirely to choice. | Not comparable |
| WING NUTS | Not in this book’s specification | Huret Bronze-de-Luxe chrome plated, G.B. lever nuts or Track nuts to choice. | Not comparable |
| MUDGUARDS | Not in this book’s specification | Continental section polished alloy. | Not comparable |
| PUMP | Not in this book’s specification | Aluminium alloy, 18" with "Presta" valve connection. | Not comparable |
1 row names another maker, 8 are worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 11 years between the 1939 and 1951 books, so a difference may date from any of them as well.
| Row | 1939 catalog, p. 17 | 1952 catalog, p. 9 | Comparison |
|---|---|---|---|
| FRAME | Built with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres. | No such row | Not comparable |
| FORKS | Taper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade. | No such row | Not comparable |
| WHEELS | 27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings. | No such row | Not comparable |
| GEAR | Simplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control. | No such row | Not comparable |
| CHAINWHEEL AND CRANKS | Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel. | No such row | Not comparable |
| TYRES | 27in. (nominal diameter) oversize High Pressure. | No such row | Not comparable |
| CHAIN | Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model). | No such row | Not comparable |
| HANDLEBARS | 1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs. | No such row | Not comparable |
| BRAKES | Front and rear "Lam" duralumin with neat "hooded" style levers. | No such row | Not comparable |
| MUDGUARD EXTENSION | Duralumin Continental type as illustrated. | No such row | Not comparable |
| SADDLE | Brooks "B.17 Flyer" or to order on Brooks combination seat pin. | No such row | Not comparable |
| PEDALS | "Lyotard" solid centre quill chromium-plated. | No such row | Not comparable |
| LUBRICATION | By "C.B." force-feed system. | No such row | Not comparable |
| EQUIPMENT | Includes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner. | No such row | Not comparable |
| FINISH | "C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts. | Brilliant flamboyant on silver base in red, purple, green, orange or peacock blue, with fork crown chrome plated. | Different wording |
| * | Pump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over. | No such row | Not comparable |
| FRAME SET | Not in this book’s specification | Brazed construction incorporating new Claud Butler taper gauge high grade steel lugs and bottom bracket shell. Accles & Pollock "Kromo" or Reynolds "531" double-butted steel tubing, round or round-oval-round chain stays (to choice), ½" or 9/16" seat stays (to choice). Oval finely tapered fork blades. Steel fork crown with sloping top. Agrati fork ends incorporating Simplex gear lug and mudguard eyes. No lamp boss unless specially requested. Two brake cable stops under top tube, Gear lever boss on down tube. "C.B." special guide tube at bracket for exposed gear cable (see Fig. 7, page 3). Adjuster stop on right-hand chain stay. 18" pump pegs with flector loop on down tube. Fork crown drilled for brake. Straight webbed seat stay bridge with reinforced brake bolt hole. Agrati head fittings, Agrati bottom bracket fittings (either standard chain line or with clearance for double chainwheel set. Alloy seat pin. Weight, 6¾ lbs. | Not comparable |
0 rows name another maker, 1 is worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 12 years between the 1939 and 1952 books, so a difference may date from any of them as well.
| Row | 1939 catalog, p. 17 | 1953 catalog, p. 11 | Comparison |
|---|---|---|---|
| FRAME | Built with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres. | No such row | Not comparable |
| FORKS | Taper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade. | No such row | Not comparable |
| WHEELS | 27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings. | No such row | Not comparable |
| GEAR | Simplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control. | No such row | Not comparable |
| CHAINWHEEL AND CRANKS | Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel. | No such row | Not comparable |
| TYRES | 27in. (nominal diameter) oversize High Pressure. | No such row | Not comparable |
| CHAIN | Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model). | No such row | Not comparable |
| HANDLEBARS | 1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs. | No such row | Not comparable |
| BRAKES | Front and rear "Lam" duralumin with neat "hooded" style levers. | No such row | Not comparable |
| MUDGUARD EXTENSION | Duralumin Continental type as illustrated. | No such row | Not comparable |
| SADDLE | Brooks "B.17 Flyer" or to order on Brooks combination seat pin. | No such row | Not comparable |
| PEDALS | "Lyotard" solid centre quill chromium-plated. | No such row | Not comparable |
| LUBRICATION | By "C.B." force-feed system. | No such row | Not comparable |
| EQUIPMENT | Includes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner. | No such row | Not comparable |
| FINISH | "C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts. | Brilliant flamboyant on silver base in Red, Green, Orange, Blue, Purple, Magenta or Peacock Blue with fork crown chromium plated. | Different wording |
| * | Pump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over. | No such row | Not comparable |
| FRAME SET | Not in this book’s specification | Brazed construction incorporating new Claud Butler taper gauge high grade steel lugs and bottom bracket shell, Accles & Pollock "KROMO" or Reynolds "531" double butted steel tubing, round or round-oval-round chain stays (to choice), ½" or 9/16" seat stays (to choice). Oval finely tapered fork blades, steel fork crown, Agrati reinforced rear ends, or alternatively Campagnolo, Simplex or Benelux ends incorporating gear lugs (to choice). No lamp boss unless specially requested. Two brake cable stops under top tube, lever boss and gear stops in accordance with gear being used. Fork crown drilled for brake, curved seat stay bridge with reinforced brake bolt hole, Gnutti head fittings, Gnutti bottom bracket fittings (either standard chain line or with clearance for double chainwheel set). Alloy seat pin. | Not comparable |
| Weight | Not in this book’s specification | 6¾ lbs. | Not comparable |
0 rows name another maker, 1 is worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 13 years between the 1939 and 1953 books, so a difference may date from any of them as well.
| Row | 1939 catalog, p. 17 | 1954 catalog, p. 9 | Comparison |
|---|---|---|---|
| FRAME | Built with "C.B." specification, double-butted "531" alloy steel tubing in my own special gauges with 1⅛in. diameter down and seat tubes, 1in. diameter top tube, finely tapered overall 13m.m. seat stays with chamfered top ends and special diameter fluted Continental chain stays incorporating an unique two-point suspension head, the new "C.B." Continental rear fork ends with integral mudguard eyes and special chain stay finish-protector. Completely welded up rear triangle. Pump pegs for 18in. pump behind the seat tube.* Frame size to order, wheelbase 42in., bracket height 11in. with 27 x 1⅜in. Oversize High Pressure tyres. | No such row | Not comparable |
| FORKS | Taper gauge butted blades in the Continental rake illustrated with orthodox oval crown. Mudguard eyes integral with fork ends. Detachable and adjustable lamp bracket welded to offside fork blade. | No such row | Not comparable |
| WHEELS | 27 x 1¼in. nominal size Special Lightweight Steel rims (36 holes front and rear), built with best 14/16 double-butted spokes on Simplex "Exceltoo" duralumin hubs. Spokes tied and soldered at the crossings. | No such row | Not comparable |
| GEAR | Simplex "Professional Champion du Monde" 3-speed with 15, 17, 19 cogs, giving, with the oversize tyres, gears of approximately 87, 77, and 69in. (or to order). Down tube or top tube control. | No such row | Not comparable |
| CHAINWHEEL AND CRANKS | Williams C.1200 Continental type or No. 19 "Durax" 48T x ½ x ⅛in. with 6½in. [?] cranks. Detachable 3-pin fixing. Chromium-plated nickel steel. | No such row | Not comparable |
| TYRES | 27in. (nominal diameter) oversize High Pressure. | No such row | Not comparable |
| CHAIN | Elite ½ x ⅛in. roller (½ x ³⁄₃₂in. on 4-speed model). | No such row | Not comparable |
| HANDLEBARS | 1in. diameter duralumin alloy bend in any of the popular Continental shapes. Duralumin alloy expander bolt stem. "Glossy" or "Matt" tape on the grips. Rubber end plugs. | No such row | Not comparable |
| BRAKES | Front and rear "Lam" duralumin with neat "hooded" style levers. | No such row | Not comparable |
| MUDGUARD EXTENSION | Duralumin Continental type as illustrated. | No such row | Not comparable |
| SADDLE | Brooks "B.17 Flyer" or to order on Brooks combination seat pin. | No such row | Not comparable |
| PEDALS | "Lyotard" solid centre quill chromium-plated. | No such row | Not comparable |
| LUBRICATION | By "C.B." force-feed system. | No such row | Not comparable |
| EQUIPMENT | Includes cape or tubular roll with tool pocket, oilgun, 18in. "Zefal" duralumin pump* and "Exceltoo" universal spanner. | No such row | Not comparable |
| FINISH | "C.B." special new "Crown Panel" finish as illustrated in contrasting shades of Blue or any colour glass-hard enamels, "C.B." guaranteed fadeless Lustre with doubie "S.A. Special" panel lines and International bands on the seat tube or "C.B." Continental Panel finish if desired. Chromium-plated fork crown and all usual bright parts. | Brilliant flamboyant on silver base in Red, Green, Orange, Blue, Purple, Magenta or Peacock Blue with fork crown chromium plated. | Different wording |
| * | Pump pegs for 18in. pump can be brazed behind seat tube only on frames size 22in. or over. | No such row | Not comparable |
| FRAME SET | Not in this book’s specification | Brazed construction incorporating new Claud Butler taper gauge high grade steel lugs and bottom bracket shell, Accles & Pollock "KROMO" or Reynolds "531" double butted steel tubing, round or round-oval-round chain stays (to choice), ½" or 9/16" seat stays (to choice). Oval finely tapered fork blades, steel fork crown, Agrati reinforced rear ends, or alternatively Campagnolo, Simplex or Benelux ends incorporating gear lugs (to choice). No lamp boss unless specially requested. Two brake cable stops under top tube, lever boss and gear stops in accordance with gear being used. Fork crown drilled for brake, curved seat stay bridge with reinforced brake bolt hole, Brampton "Alatet" head fittings, Bayliss Wiley "Featherweight" bracket fittings (either standard chain line or with clearance for double chainwheel set). Alloy seat pin. | Not comparable |
0 rows name another maker, 1 is worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 14 years between the 1939 and 1954 books, so a difference may date from any of them as well.
Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.
Readings to check against the scan

Page 17 of 32 pages held. Open it in the archive
Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

1939

1951
42 · 42a

1952
51

1953
51

1954
51
What else Ebykr holds on it.
Four things the archive does not yet hold for this model-year, and where a reader can add to each.
The Ebykr Digest
New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.
Double opt-in. One email per month. Unsubscribe at any time with one click.