· England · 1951 catalog, year printed in the book

The "International Club" model, 1951

Printed as The "International Club" model, models 40, 40a and 40b, on page 7 of the 1951 catalog. The Showroom files it under the International Club family, a grouping made by Ebykr and not by the catalog.

This model in other years

  1. 1949
  2. 1951
  3. 1952
  4. 1953
  5. 1954

In 5 of Claud Butler’s 10 catalog years. All Claud Butler years

The "International Club" model, as pictured in the 1951 catalog
A dark-finished bicycle with drop handlebars, rear derailleur and mudguards, right side view. Cut from page 7 of the 1951 catalog. Scan: 2velo.com (Claud Butler catalog index). Open the book in the archive

At a glance

Model numbers
40, 40a, 40b
Versions
  • Frame set · 40
  • Complete, single speed · 40a · single speed, one brake, two fixed cogs
  • Complete, three speed · 40b · three speed, two brakes
Weight
23½ lbs. single speed

From the catalog

Incorporating welded frame construction basically as introduced by C.B. in the 1930's, this model embodies the best features of subsequent developments and modern technique1951 catalog, p. 7

Price when new

34s 9dcomplete bicycle (incl. £6 10 7 Tax)

Printed as three speed on page 7 of the 1951 catalog.

Printed in pounds and shown as printed. The Showroom does not convert it: its price index and wage figures are American, so a figure in pounds has no honest counterpart in 2026 dollars or in weeks of an average wage.

Also on the sheet: single speed 30s 10d; FRAME SET 11s 17d.

Specification as printed

Every row is the catalog’s own wording, from page 7 of the 1951 catalog.

Row1951 catalog, p. 7
FRAME SETReynolds "531" tubing throughout. Double butted top and down tubes, single butted seat tube. Taper butted seat stays, chain stays and fork blades. C.B. low-temperature process bronze-welded construction. Seat stay tops chamfered and "wrapped" over seat cluster (see Fig. 3, page 3). Drop forged steel fork crown and ends. Oval section fork blades. Mudguard eyes incorporated front and rear. Lamp bracket boss on R.H. fork blade fitted with chrome plated detachable lamp bracket. 18" pump pegs on down tube. Brazed on stops for exposed brake and gear cables with detachable pulley for latter at bracket. Gear lever boss for Simplex or Huret if desired no extra. Curved seat stay bridge with reinforced brake bolt hole. Crown also drilled for front brake. Polygonal head fittings (for expander stem). Bayliss Wiley or Brampton bottom bracket fittings. Alloy seat pin. Weight, 7 lbs.
CHAINWHEEL AND CRANKSWilliams C.34 three-pin type, 6½" with detachable 46 or 48T. x ½" x ⅛" chain ring.
HUBSBritish Hub Co.'s "Solite" or similar.
SPOKESDouble butted 15/17G. rustless.
RIMSDunlop "Special Lightweight" (High Pressure) C.P. steel, 27".
TYRESDunlop "Road Racing" (High Pressure), 27" x 1¼", or "Sprites."
FREEWHEEL AND COGSSingle speed models carry two fixed cogs on the double sided rear hub. Geared models have fixed cog one side and freewheel "block" the other.
GEARSimplex, Huret or Benelux 3, 4 or 5-speed as desired. Note. Where 3/32" transmission is necessary to comply with your choice of gear, this incurs slight additional charges for the special chain and chain ring.
WING NUTSSerrated washer wing nuts or "track" nuts as desired.
CHAINRenolds ½" x ⅛" (or as specified for gear).
PEDALSDouble sided or quill pattern racing.
HANDLEBARSAlloy bend 15/16" dia. to choice with "G.B." or Strata alloy expander stem. Grips "plugged" and taped.
BRAKESAlloy "G.B." (or similar), "Coureur" pattern front brake. Additional (rear) brake is essential on geared or freewheel models and is supplied at usual extra.
SADDLEBrooks B.17.N.
MUDGUARDSPolished aluminium alloy or white celluloid.
PUMPAluminium alloy 18", or white celluloid. Connector to suit inner tube valves supplied.
FINISH"Bonderized" throughout, then stoved three coats of glass-hard coloured enamel, double box lined in the C.B. tradition and one coat of clear lacquer over transfers. Fork crown chromium plated. Alternative finishes and additional chrome plating entirely optional at usual extra.

Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.

Page 7 of the 1951 catalog

Page 7 of 17 pages held. Open it in the archive

The International Club through the books

Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

  1. 1936 to 1939not in these two books
  2. "International Club" Models, as pictured in the 1949 catalog

    1949

    "International Club" Models

    13 · 14 · 16

  3. The "International Club" model, as pictured in the 1951 catalog

    1951

    The "International Club" model

    40 · 40a · 40b

  4. The "International Club" model, as pictured in the 1952 catalog

    1952

    The "International Club" model

    40 · 40a · 40b

  5. The 'International Club' model, as pictured in the 1953 catalog

    1953

    The 'International Club' model

    40

  6. The 'International Club' model, as pictured in the 1954 catalog

    1954

    The 'International Club' model

    40

  7. 1955cannot tell: part of the book
  8. 1961 to 1977not in these two books

Around this model-year

What else Ebykr holds on it.

Help fill the record

Four things the archive does not yet hold for this model-year, and where a reader can add to each.

Back to the 1951 range

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.