About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
· England · 1951 catalog, year printed in the book
Printed as The "Continental Classique" model
, models 41, 41a and 41b, on page 8 of the 1951 catalog. The Showroom files it under the Continental Classique family, a grouping made by Ebykr and not by the catalog.
This model in other years
In 2 of Claud Butler’s 10 catalog years. All Claud Butler years

A really sound brazed lug "job" for the experienced enthusiast. Moderately upright design giving a comfortable (therefore speedy) position for riders of average stature.1951 catalog, p. 8
36s 12dcomplete bicycle (incl. £6 18 8 Tax)
Printed as three speed
on page 8 of the 1951 catalog.
Printed in pounds and shown as printed. The Showroom does not convert it: its price index and wage figures are American, so a figure in pounds has no honest counterpart in 2026 dollars or in weeks of an average wage.
Also on the sheet: single speed 32s 13d; FRAME SET 13s 12d.
Every row is the catalog’s own wording, from page 8 of the 1951 catalog.
| Row | 1951 catalog, p. 8 |
|---|---|
| FRAME SET | Brazed lug construction, utilising C.B. cutaway steel lugs of pleasing and practical design, with Reynolds "531" tubing throughout. Double butted top and down tubes, single butted seat tube, taper butted seat stays, chain stays and oval section fork blades. Seat stay tops chamfered and "wrapped" over seat cluster (see Fig. 3, page 3). Drop forged steel fork crown and ends. Mudguard eyes incorporated front and rear. Lamp bracket boss on R.H. fork blade fitted with chrome plated detachable lamp bracket. 18" pump pegs on down tube. Brazed on stops for exposed brake and gear cables with detachable pulley for latter at bracket. Gear lever boss for Simplex or Huret if desired no extra. Curved seat stay bridge with reinforced brake bolt hole. Crown also drilled for front brake. Polygonal head fittings (for expander stem). Bayliss Wiley bracket fittings. Alloy seat pin. Weight, 7 lbs. |
| CHAINWHEEL AND CRANKS | Williams C.34 three pin type, 6½", with detachable 46 or 48T. x ½" x ⅛" chain ring. |
| HUBS | British Hub Co.'s "Solite" or similar. |
| SPOKES | Double butted 15/17G. rustless. |
| RIMS | Dunlop "Special Lightweight" (High Pressure) C.P. steel, 27". |
| TYRES | Dunlop "Road Racing" (High Pressure), 27" x 1¼", or "Sprites." |
| FREEWHEEL AND COGS | Single speed models carry two fixed cogs on the double sided rear hub. Geared models have fixed cog one side and freewheel "block" the other. |
| GEAR | Simplex, Huret or Benelux 3, 4 or 5-speed as desired. Note. Where 3/32" transmission is necessary to comply with your choice of gear, this incurs slight additional charges for the special chain and chain ring. |
| WING NUTS | Serrated washer wing nuts or "track" nuts as desired. |
| CHAIN | Renolds ½" x ⅛" (or as specified for gear). |
| PEDALS | Double sided or quill pattern racing. |
| HANDLEBARS | Alloy bend 15/16" dia. to choice with "G.B." or Strata alloy expander stem. Grips "plugged" and taped. |
| BRAKES | Alloy "G.B." (or similar) "Coureur" pattern front brake. Additional (rear) brake is essential on geared or freewheel models and is supplied at usual extra. |
| SADDLE | Brooks B.17.N. |
| MUDGUARDS | Polished alloy[?], or white celluloid. |
| PUMP | Aluminium alloy 18", or white celluloid. Connector to suit inner tube valves supplied. |
| FINISH | "Bonderized" throughout, then stoved three coats of C.B. super glass-hard coloured enamel, and one coat of clear lacquer over transfers. Lugs delicately outlined in contrasting colour. Fork crown chromium plated. Alternative finishes or additional chromium plating entirely optional at usual extra. |
| Row | 1951 catalog, p. 8 | 1939 catalog, p. 16 | Comparison |
|---|---|---|---|
| FRAME SET | Brazed lug construction, utilising C.B. cutaway steel lugs of pleasing and practical design, with Reynolds "531" tubing throughout. Double butted top and down tubes, single butted seat tube, taper butted seat stays, chain stays and oval section fork blades. Seat stay tops chamfered and "wrapped" over seat cluster (see Fig. 3, page 3). Drop forged steel fork crown and ends. Mudguard eyes incorporated front and rear. Lamp bracket boss on R.H. fork blade fitted with chrome plated detachable lamp bracket. 18" pump pegs on down tube. Brazed on stops for exposed brake and gear cables with detachable pulley for latter at bracket. Gear lever boss for Simplex or Huret if desired no extra. Curved seat stay bridge with reinforced brake bolt hole. Crown also drilled for front brake. Polygonal head fittings (for expander stem). Bayliss Wiley bracket fittings. Alloy seat pin. Weight, 7 lbs. | No such row | Not comparable |
| CHAINWHEEL AND CRANKS | Williams C.34 three pin type, 6½", with detachable 46 or 48T. x ½" x ⅛" chain ring. | Williams C.1200, light steel Continental type or "Durax" No. 19, with detachable chainwheel. Chromium plated. | Different wording |
| HUBS | British Hub Co.'s "Solite" or similar. | No such row | Not comparable |
| SPOKES | Double butted 15/17G. rustless. | No such row | Not comparable |
| RIMS | Dunlop "Special Lightweight" (High Pressure) C.P. steel, 27". | 26 x 1¼in. chromium-plated Endrick rims built up with double butted spokes on "C.B." Pencil Barrel Lightweight steel hubs. (Special "Unit" rear hub on 3-speed model, with integral freewheel to take interchangeable derailleur cogs.) "High Pressure" tyres and rims on this model 5/- extra, if desired. | Different wording |
| TYRES | Dunlop "Road Racing" (High Pressure), 27" x 1¼", or "Sprites." | Dunlop "Silver Sprite," "Translucent Speed" or "Sprite." | Different wording |
| FREEWHEEL AND COGS | Single speed models carry two fixed cogs on the double sided rear hub. Geared models have fixed cog one side and freewheel "block" the other. | No such row | Not comparable |
| GEAR | Simplex, Huret or Benelux 3, 4 or 5-speed as desired. Note. Where 3/32" transmission is necessary to comply with your choice of gear, this incurs slight additional charges for the special chain and chain ring. | No such row | Not comparable |
| WING NUTS | Serrated washer wing nuts or "track" nuts as desired. | No such row | Not comparable |
| CHAIN | Renolds ½" x ⅛" (or as specified for gear). | Coventry ½ x ⅛in. roller. | Different wording |
| PEDALS | Double sided or quill pattern racing. | Solid centre Quill type racing pedals, specially suitable for use with any make of toe clip and strap. | Different wording |
| HANDLEBARS | Alloy bend 15/16" dia. to choice with "G.B." or Strata alloy expander stem. Grips "plugged" and taped. | "Tour de France," "Lapebie" or "Bailey" chromium-plated high tensile steel bend on special lightweight expander stem. 2 or 3in. extension. Taped grips. | Different wording |
| BRAKES | Alloy "G.B." (or similar) "Coureur" pattern front brake. Additional (rear) brake is essential on geared or freewheel models and is supplied at usual extra. | "Gloria" steel, "C.B." alloy, or to order. Two brakes inclusive on 3-speed model. Option of front or rear brake on single-speed model. | Different wording |
| SADDLE | Brooks B.17.N. | Mansfield Ormond duralumin or Brooks "B.17N Champion." | Different wording |
| MUDGUARDS | Polished alloy[?], or white celluloid. | Bluemels white "Noweight" with quick-release wing nut fastening to brazed eyelets front and rear. | Different wording |
| PUMP | Aluminium alloy 18", or white celluloid. Connector to suit inner tube valves supplied. | No such row | Not comparable |
| FINISH | "Bonderized" throughout, then stoved three coats of C.B. super glass-hard coloured enamel, and one coat of clear lacquer over transfers. Lugs delicately outlined in contrasting colour. Fork crown chromium plated. Alternative finishes or additional chromium plating entirely optional at usual extra. | No such row | Not comparable |
| FRAME | Not in this book’s specification | Built throughout with special Continental "Classique" lugs and fittings to special "C.B." angles. Incorporating Reynolds "531" double-butted steel tubing in the "C.B." gauges. Long taper seat stays and "C.B." special rigid section chain stays giving ample clearance for all tyres. Completely brazed-up frame with all usual refinements brazed on, including chain stay protector, pump pegs, mudguard eyes and detachable fork blade lamp bracket. New "C.B." Continental rear frame ends. 72° seat, 74° head. Wheelbase, 41½in. Bracket height, 10½in. [?] Frame sizes to order from 20½in. [?] | Not comparable |
| FORKS | Not in this book’s specification | Special resilient oval-taper-to-round taper butted blades in the Continental rake illustrated. Light Continental fork crown. Butted steering column. Solid quick-release ends. | Not comparable |
| THREE-SPEED GEARS | Not in this book’s specification | Simplex "Professional" lightweight racing derailleur, Cyclo Standard derailleur or Tri-Velox type "B.I." [?] | Not comparable |
| EQUIPMENT | Not in this book’s specification | 15in. celluloid pump. Tool roll with tools and oilgun, etc. | Not comparable |
| LUBRICATION | Not in this book’s specification | "C.B." force-feed lubrication system to head and bracket. | Not comparable |
| FINISH (a) | Not in this book’s specification | Bronze Yellow glass-hard enamel "base" with 6in. band on seat tube, double panelled lines on all frame tubes and lug edges picked out in contrasting Amber Brown. | Not comparable |
| FINISH (b) | Not in this book’s specification | Blue Lustre "base" with international bands on the seat tube, frame and forks double-lined Red and Gold. | Not comparable |
| NOTE | Not in this book’s specification | Any desired alternative colour combinations can be supplied in either of the above styles. Finish includes chromium plated fork crown and all usual bright parts | Not comparable |
0 rows name another maker, 9 are worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 11 years between the 1939 and 1951 books, so a difference may date from any of them as well.
Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.

Page 8 of 17 pages held. Open it in the archive
Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

1939

1951
The "Continental Classique" model
41 · 41a · 41b
What else Ebykr holds on it.
Four things the archive does not yet hold for this model-year, and where a reader can add to each.
The Ebykr Digest
New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.
Double opt-in. One email per month. Unsubscribe at any time with one click.