About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
About Ebykr
Ebykr celebrates classic and vintage lightweight bicycles through provocative imagery and opinion. Ride along with us.
· England · 1951 catalog, year printed in the book
Printed as "La Quelda"
, on page 2 of the 1951 catalog. The Showroom files it under the La Quelda family, a grouping made by Ebykr and not by the catalog.
This model in other years
In 8 of Holdsworth’s 29 catalog years. All Holdsworth years

Fifteen years ago HOLDSWORTH first produced "La Quelda" welded frames.1951 catalog, p. 2
£33 15s 8dcash price, complete bicycle
Printed as La Quelda
on page 2 of the 1951 catalog.
Printed in pounds and shown as printed. The Showroom does not convert it: its price index and wage figures are American, so a figure in pounds has no honest counterpart in 2026 dollars or in weeks of an average wage.
Also on the sheet: frame only £12 10s.
Every row is the catalog’s own wording, from page 2 of the 1951 catalog.
| Row | 1951 catalog, p. 2 |
|---|---|
| FRAME | '531' Reynolds tubing welded and finished to give absolutely clean lines. Other details as CYCLONE road frame. |
| CHAIN SET | Williams well-known and appreciated chrome steel C34. |
| WHEELS | Dunlop chrome plated high pressure rims built on British Hub Co's. "Solite" steel hubs with double butted spokes. Dunlop skin sided H.P. tyres and tubes. G.B. [?] alloy lever-type wing nuts. One fixed cog and lock ring fitted. |
| CHAIN | Reynolds best-—the 'Elite' ½" x ⅛" roller. |
| PEDALS | Holdsworth famous Allez Alloy Quill pattern. |
| BRAKES | Pair G.B. Alloy Brakes. |
| BARS | Maes or to choice. |
| SADDLE | Brooks 'B17'—the world's best. |
| STEM | Holdsworth's hand-made 3" in chrome and red enamel. |
| PUMP | Bluemels. |
| FINISH | As CYCLONE. |
| Row | 1951 catalog, p. 2 | 1937 catalog, p. 4 | Comparison |
|---|---|---|---|
| FRAME | '531' Reynolds tubing welded and finished to give absolutely clean lines. Other details as CYCLONE road frame. | Of H.M. Tubing, carefully and accurately welded, this can be made to any design as it is not governed by lugs cast to specified angles. Our model is based on the current requirements abroad and at home. Top Tube 22⅝", Seat Tube 22", Tubes all 1⅛" tubes, Seat tube angle 70°, Head tube angle 73°. Continental drop-out, specially designed for chaingear. Wheelbase 41½", bracket height 10½", with 26" wheels. Built to give bare mud-guard clearance with 27" wheels. The forks are very latest Continental Taper "D" to Round 2⅝" gradual rake. Note the French type mudguard eyes. | Different wording |
| CHAIN SET | Williams well-known and appreciated chrome steel C34. | No such row | Not comparable |
| WHEELS | Dunlop chrome plated high pressure rims built on British Hub Co's. "Solite" steel hubs with double butted spokes. Dunlop skin sided H.P. tyres and tubes. G.B. [?] alloy lever-type wing nuts. One fixed cog and lock ring fitted. | 27" built with Holdsworth Narrow barrel Hubs and Tabucchi Maple Rims. | Different wording |
| CHAIN | Reynolds best-—the 'Elite' ½" x ⅛" roller. | Coventry Roller ½" × ⅛" | Names another maker |
| PEDALS | Holdsworth famous Allez Alloy Quill pattern. | Webb Quill design 5/32" balls, with plenty of room, solid centre. | Different wording |
| BRAKES | Pair G.B. Alloy Brakes. | Two Bulla Duraluminium—featherweight Calipers. | Different wording |
| BARS | Maes or to choice. | No such row | Not comparable |
| SADDLE | Brooks 'B17'—the world's best. | Brooks B.17 Champion (Standard, Normal or Sprinter) or Mansfield "Ormond." | Different wording |
| STEM | Holdsworth's hand-made 3" in chrome and red enamel. | No such row | Not comparable |
| PUMP | Bluemels. | No such row | Not comparable |
| FINISH | As CYCLONE. | Best rust-proof, finished in "Continental" Cane, Paloma Green or Sebastian Blue, lined and panelled with chrome crown, front ends and rear ends—colour bands to order. | Different wording |
| CHAIN WHEEL AND CRANKS. | Not in this book’s specification | Williams C34 chrome plated—46" × ½" × ⅛" with 6½" cranks. | Not comparable |
| TYRES. | Not in this book’s specification | Dunlop No. 3, Constrictor "Viper" or Tabucchi "All Rounder" Tubulars. | Not comparable |
| HANDLEBAR. | Not in this book’s specification | Reynolds Heavychromed Continental design, Continental diameter on genuine Chater Lea right-angle extension. | Not comparable |
| GEAR. | Not in this book’s specification | Simplex, Osgear or Cyclo "Ace" Derailleurs giving any desired ratio, the wheel easily removed and replaced. | Not comparable |
1 row names another maker, 6 are worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the 13 years between the 1937 and 1951 books, so a difference may date from any of them as well.
| Row | 1951 catalog, p. 2 | 1949 catalog, p. 3 | Comparison |
|---|---|---|---|
| FRAME | '531' Reynolds tubing welded and finished to give absolutely clean lines. Other details as CYCLONE road frame. | No such row | Not comparable |
| CHAIN SET | Williams well-known and appreciated chrome steel C34. | No such row | Not comparable |
| WHEELS | Dunlop chrome plated high pressure rims built on British Hub Co's. "Solite" steel hubs with double butted spokes. Dunlop skin sided H.P. tyres and tubes. G.B. [?] alloy lever-type wing nuts. One fixed cog and lock ring fitted. | No such row | Not comparable |
| CHAIN | Reynolds best-—the 'Elite' ½" x ⅛" roller. | No such row | Not comparable |
| PEDALS | Holdsworth famous Allez Alloy Quill pattern. | No such row | Not comparable |
| BRAKES | Pair G.B. Alloy Brakes. | No such row | Not comparable |
| BARS | Maes or to choice. | No such row | Not comparable |
| SADDLE | Brooks 'B17'—the world's best. | No such row | Not comparable |
| STEM | Holdsworth's hand-made 3" in chrome and red enamel. | No such row | Not comparable |
| PUMP | Bluemels. | No such row | Not comparable |
| FINISH | As CYCLONE. | Superb finishes in almost any colour glass-hard enamel, or lustres in gold, copper, bronze, silver, mauve, maroon and light or dark green, blue or grey. Continental double lining and contrasting coloured band around seat tube. Spearpoints on top eyes lined in contrast. Complete set of transfers including Olympic 5-colour chevrons on seat tube. | Different wording |
| MAIN TRIANGLE | Not in this book’s specification | Reynolds double-butted "531" steel alloy tubing to top tube, down tube and head tube. Single butted "531" to seat tube. Tube ends machine mitred for perfect fit. | Not comparable |
| SEAT STAYS | Not in this book’s specification | ½" dia. fine taper "531" tubing with curved mudguard bridge. "Holdsworth's" own long solid spearpoint top eyes machined and lightened, and securely brazed high up the seat cluster. | Not comparable |
| CHAINSTAYS | Not in this book’s specification | ⅞" dia. tapered round-oval-round in "531" tubing, giving strength and adequate tyre clearance. Rear drop-outs are Stallard standard F.D.O. or Osgear pattern or Chater Lea. | Not comparable |
| FRONT FORKS | Not in this book’s specification | Heavily butted "531" steering column and "531" taper gauge oval fork blades with 2⅝" [?] Continental rake tapering to fine dia. at ends. "Holdsworth's" own special genuine 2-plate oval crown machined from highest quality mild steel. Stallard solid drop-out fork ends. | Not comparable |
| ATTACHMENTS | Not in this book’s specification | Brazed on lamp-bracket boss on right fork blade; cable stops under top tube allowing rear brake cable to run bared; and pump pegs for 15" pump on down tube (18" if ordered). Continental type guard eyes incorporated in front and rear drop-outs, tapped to take mudguard securing bolts, or English pattern guard eyes brazed on fork blades and seat stays. (Any brazed on attachment may be omitted if desired.) | Not comparable |
| SIZES | Not in this book’s specification | Usual sizes are 22" and 23". (20", 21" and 24" to order.) Head Angle 73° and seat tube angle 71°. Top Tube approx. 22¾". Wheelbase 41¼". Length of chainstays (i.e., drive) 17½". Bracket height 10½" with 26" wheels. Frame is built to give bare mudguard clearance when 27" wheels are used and full clearance with 26" wheels. | Not comparable |
| FITTINGS | Not in this book’s specification | The best quality on the market, including "Lytaloy" Continental type head fittings with serrated washer and locking nut for fine adjustment and 5/32" dia. bearings top and bottom. Bracket fittings are genuine Bayliss-Wiley or Brampton plated. Also fitted are an alloy seat pillar with "Allez" polished seat pillar clamp; Reynolds, Constrictor or Chater Lea adjustable lamp bracket. | Not comparable |
0 rows name another maker, 1 is worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product. The archive holds no catalog for the one year between the 1949 and 1951 books, so a difference may date from any of them as well.
| Row | 1951 catalog, p. 2 | 1950 catalog, p. 2 | Comparison |
|---|---|---|---|
| FRAME | '531' Reynolds tubing welded and finished to give absolutely clean lines. Other details as CYCLONE road frame. | No such row | Not comparable |
| CHAIN SET | Williams well-known and appreciated chrome steel C34. | No such row | Not comparable |
| WHEELS | Dunlop chrome plated high pressure rims built on British Hub Co's. "Solite" steel hubs with double butted spokes. Dunlop skin sided H.P. tyres and tubes. G.B. [?] alloy lever-type wing nuts. One fixed cog and lock ring fitted. | No such row | Not comparable |
| CHAIN | Reynolds best-—the 'Elite' ½" x ⅛" roller. | No such row | Not comparable |
| PEDALS | Holdsworth famous Allez Alloy Quill pattern. | No such row | Not comparable |
| BRAKES | Pair G.B. Alloy Brakes. | No such row | Not comparable |
| BARS | Maes or to choice. | No such row | Not comparable |
| SADDLE | Brooks 'B17'—the world's best. | No such row | Not comparable |
| STEM | Holdsworth's hand-made 3" in chrome and red enamel. | No such row | Not comparable |
| PUMP | Bluemels. | No such row | Not comparable |
| FINISH | As CYCLONE. | Superb finishes in almost any colour glass-hard enamel, including the latest pastel shades or lustres in gold, copper, bronze, silver, mauve, maroon and light or dark green, blue or grey. Continental double lining and constrasting coloured band around seat tube. Spearpoints on top eyes lined in contrast. Complete set of transfers including Olympic 5-colour chevrons on seat tube. | Different wording |
| MAIN TRIANGLE | Not in this book’s specification | Reynolds double-butted "531" steel alloy tubing to top tube, down tube and head tube. Single butted "531" to seat tube. Tube ends machine mitred for perfect fit. | Not comparable |
| SEAT STAYS | Not in this book’s specification | ½" dia. fine taper "531" tubing with curved mudguard bridge. "Holdsworth's" own long solid spearpoint top eyes machined and finished in our own workshops. Securely brazed high up the seat cluster. | Not comparable |
| CHAINSTAYS | Not in this book’s specification | ⅞" dia. tapered round-oval-round in "531" tubing, giving strength and adequate tyre clearance. Rear drop-outs are Stallard standard F.D.O. or Osgear pattern or Chater Lea. | Not comparable |
| FRONT FORKS | Not in this book’s specification | Heavily butted "531" steering column and "531" taper gauge oval fork blades with 2⅝" Continental rake tapering to fine dia. at ends. "Holdsworth's" own special genuine 2-plate oval crown machined from highest quality mild steel. Stallard solid drop-out fork ends. | Not comparable |
| ATTACHMENTS | Not in this book’s specification | Brazed on lamp-bracket boss on right fork blade; cable stops under top tube allowing rear brake cable to run bared; and pump pegs for 15" pump on down tube (18" if ordered). Continental type guard eyes incorporated in front and rear drop-outs, tapped to take mudguard securing bolts, or English pattern guard eyes brazed on fork blades and seat stays. (Any brazed on attachment may be omitted if desired.) | Not comparable |
| SIZES | Not in this book’s specification | Usual sizes are 22" and 23". (20", 21" and 24" to order). Head Angle 73° and seat tube angle 71° Top tube approx. 22¾". Wheelbase 41¼". Length of chainstays (i.e., drive) 17½". Bracket height 10½" with 26" wheels. Frame is built to give bare mudguard clearance when 27" wheels are used and full clearance with 26" wheels. | Not comparable |
| FITTINGS | Not in this book’s specification | The best quality on the market, including "Lytaloy" Continental type head fittings with serrated washer and locking nut for fine adjustment and 5/32" dia. bearings top and bottom. Bracket fittings are genuine Bayliss-Wiley or Brampton plated. Also fitted are an alloy seat pillar with "Allez" polished seat pillar clamp; Reynolds, Constrictor or Chater Lea adjustable lamp bracket. | Not comparable |
0 rows name another maker, 1 is worded differently and 0 read the same. Marked words are the ones the other book does not print. A different wording is what two catalogs print. It is not by itself a change to the bicycle, and a catalog was not always right about its own product.
Taken from the archive’s transcription of the page and checked against the scan. Spelling and abbreviations are the catalog’s.

Page 2 of 11 pages held, part of the book. Open it in the archive
Each frame is one catalog, under the name that catalog prints. A run of years with no entry is one labeled gap.

1937
1938

1949

1950

1951

1952

1953

1954
What else Ebykr holds on it.
Four things the archive does not yet hold for this model-year, and where a reader can add to each.
The Ebykr Digest
New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.
Double opt-in. One email per month. Unsubscribe at any time with one click.