ReynoldsTube set

Reynolds 753 tubing technical data sheet T205

Cited to the catalog page In 2 catalogs, 1976. Made in England.

Specification

The fields every tube set record carries. Each value names where it comes from: a catalog page, a saddle guide, a reader’s measurement or another published source. 2 of 6 fields are recorded so far; the empty rows are what the database still needs. Know one? Use Add beside the field to send it for review.

Fit and standards
FitsAddNot yet recorded
Construction
MaterialAdd
Special manganese-molybdenum steel allowing frame tube wall thicknesses down to about 0.3 mm
Reynolds technical data sheet T205 for 753 tubes, page 11976 (printer's line 776)
As printedReynolds 753 Cycle Tubing is a special manganese-molybdenum steel cycle tube
Version or finishAdd
The sheet warns that frames are to be built only by craftsmen used to very light frames: filler rod with melting range not above 650 degrees C, a fluoride flux active at 550 degrees C
Reynolds technical data sheet T205 for 753 tubes, page 11976 (printer's line 776)
As printedFILLER ROD MATERIAL should be to specification DIN 8513-L-AG40 Od or U.S. ASTM B260-56T
Temperatures over 700 degrees C seriously affect the strength of the finished frame; setting a frame after brazing is virtually impossible and must be avoided
Reynolds technical data sheet T205 for 753 tubes, page 21976 (printer's line 776)
As printed'Setting' is virtually impossible other than for minute movements, and must be avoided.
Markings and date codesAddNot yet recorded
Weight and price
Weight gAddNot yet recorded
Price when newAddNot yet recorded
Also printed
Strength
Minimum ultimate tensile stress 1158 N/mm2 (75 tonf/in2); 0.2% proof stress 927 N/mm2 (60 tonf/in2); elongation 8%
Reynolds technical data sheet T205 for 753 tubes, page 11976 (printer's line 776)
As printedUltimate Tensile Stress | 1158 N/mm² | (75 tonf/in² ) 0.2% Proof Stress | 927 N/mm² | (60 tonf/in² ) Elongation on 5.65 √A | 8%

Add to this record

Measured one, or found a value printed somewhere? Fill in the fields you know and say how you know them. An editor checks every value before it appears, and a reader’s value is shown beside the catalog’s, never in place of it.

Add values to this record

Fill this in now. Sending it needs a free Ebykr account, and what you type is kept in this browser until you sign in.

Fit and standards
Construction
Weight and price
How you know

Shown with the values. Which example you measured, its year or condition, a left and right that differ.

Photo optional

Once you are signed in you can add a photo of the part on the caliper or the scale, or of the marking.

Sending needs a free Ebykr account so an editor can ask you about a value. What you type stays in this browser while you sign in.

Sign in to send Create a free account

Nothing appears on the page until an editor approves it.

In the catalogs

The pages it is printed on

Each picture is the catalog page itself; open one to read it at full size in the archive.

Reynolds 753 tubing technical data sheet T205 in Reynolds technical data sheet T205 for 753 tubes, page 1
1976 (printer's line 776), page 1
Reynolds 753 tubing technical data sheet T205 in Reynolds technical data sheet T205 for 753 tubes, page 2
1976 (printer's line 776), page 2

As each catalog named it

1976 (printer's line 776)
T205 REYNOLDS 753 BUTTED CYCLE FRAME page 1
1976 (printer's line 776)
T205 Note: Temperature over 700° will seriously affect the strength of the finished frame. page 2

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.