Shimano Catalog of December 1975 — A Complete Line of Shimano: Dura-Ace, the New 600 Series, Positron, Crane, Titlist, Tourney and Eagle, Hubs and Brakes

“A Complete Line of Shimano”, printed in Japan in December 1975: Dura-Ace for road, touring and track, the new 600 series, the new Positron and the other derailleurs, levers, freewheels, hubs, brakes, hub gears, small parts and tools.

— Page 1 (back cover) —
SHIMANO SALES CORPORATION
SHIMANO AMERICAN CORPORATION
SHIMANO (EUROPA) GmbH.
SHIMANO INDUSTRIAL CO.,LTD.
Specifications are subject to cange without notice.
‘75.12.KM.NP. Printed in Japan

A
COMPLETE
LINE
OF
SHIMANO
DURA-ACE Series
600 Series
Rear Derailleur
Front Derailleur
Shifting Lever
Freewheel
Hub
Caliper Brake
Coaster Brake
Hub Gear
Disc Brake / Protector
Small Parts
Outer Band
Special Tool
SHIMANO

[The front cover of “A COMPLETE LINE OF SHIMANO” with a list of component types and a photograph of three cyclists in blue jerseys on bicycles, shown beside the back cover with the names of four Shimano companies. The cover is spread across both halves of the image, with the back cover on the left.]

— Page 2 —
Shimano
DURA-ACE Series
EQUIPPED WITH
DURA-ACE
SHIMANO
1

The Dura-Ace series of bicycle components is the best to be found anywhere. Produced with extra time and attention to detail, the Dura-Ace line surpasses the demands of the most severe cyclist. If only the best is good enough, or if competitive performance is essential, then Dura-Ace will become the center of the cyclist’s riding satisfaction.
Each part in the Dura-Ace series is engineered to be light and strong. Shimano’s research teams developed a special “micra” alloy which is precision cold-forged into a final lustrous, jewel-like finish. Those who know quality in bicycle components demand the non-compromising value of Dura-Ace.
2

[A spread titled “Shimano DURA-ACE Series” with an “EQUIPPED WITH DURA-ACE” label and a studio photograph of Dura-Ace components laid out on a dark surface, including cranksets, hubs, derailleurs, brakes, levers, freewheels and headset parts. Two paragraphs of text sit at the top right.]

— Page 3 —
EQUIPPED WITH
DURA-ACE
SHIMANO
Shimano
DURA-ACE
Series for Road & Touring
Model DB-100
Model DB-110
Model EA-100
Model KA-320
Model LA-100
Model KA-100
Model KA-300
Model LD-500
Model KA-110
Model KA-310
Model KB-110
3

Rear Derailleur
Model DB-100
CRANE
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 28 Teeth or Less
Weight: 7.9 oz. (225 g)
Material: Light Alloy
Type: Servo Panta Mechanism
Option: Adaptor

Model DB-110
CRANE-GS
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 9.5 oz. (270 g)
Material: Light Alloy
Type: Servo Panta Mechanism (Long Cage Plate)
Option: Adaptor

Front Derailleur
Model EA-100
DURA-ACE
SPECIFICATIONS
Capacity: 16 Teeth or Less
Weight: 3.7 oz. (105 g)
Material: Light Alloy (Body), Steel (Chain Guide)
Type: Lower Inlet Type 1-1/8″

DURA-ACE Black Series

Shifting Lever
Model LA-100
DURA-ACE
SPECIFICATIONS
Weight: 2.65 oz. (75 g)
Material: Light Alloy
Type: Double Lever
Lever Clamp Diameter: 1-1/8″

Model LD-500
BAR-END CONTROL
SPECIFICATIONS
Weight: 2.8 oz. (80 g)
Material: Light Alloy
Use: 10-speed
Attachment Position: Bar-End
Type: With Spiral Spring (Balance Spring)

Cable Parts
Model KA-100
CABLE GUIDE
SPECIFICATIONS
Clamp Diameter: 1-1/8″
Material: Steel
Use: For 10 Speed

Model KB-110
OUTER STOPPER
SPECIFICATIONS
Clamp Diameter: 1-1/8″
Material: Steel
Use: For 10 Speed
For Bar-End Control

Model KA-110
OUTER STOPPER
SPECIFICATIONS
Clamp Diameter: 5/8″
Material: Steel

Brazed on Parts
Model KA-300
CABLE GUIDE
SPECIFICATIONS
Material: Steel

Model KA-310
OUTER STOPPER
SPECIFICATIONS
Material: Steel

Model KA-320
LEVER AXLE
SPECIFICATIONS
Material: Steel
4

[Dura-Ace Series for Road & Touring: a photograph of rear and front derailleurs, shift levers, bar-end controls and cable parts with model labels, beside specification lists for models DB-100, DB-110, EA-100, LA-100, LD-500 and the KA and KB cable parts. A small photograph is captioned “DURA-ACE Black Series”.]

— Page 4 —
EQUIPPED WITH
DURA-ACE
SHIMANO
Shimano
DURA-ACE
Series for Road & Touring
Model GA-200
Model FA-100
Model FA-110
Model GB-100
Model HA-200
Model HA-100
5

Multiple Freewheel
Model FA-100 (5 Speed Gold)
FA-110 (6 Speed Gold)
DURA-ACE
SPECIFICATIONS
Standard Sprocket: 1/2″ x 3/32″ Chain (2mm)
Thread: 1.37″ x 24″ T.P.I.(English)
Available by request 35 x 1.0 (French)
Sprocket: Golden Finish
Standard Sprocket Combinations:
5-speed | 13, 15, 17, 19, 21T
| 14, 16, 18, 20, 22T
| 15, 17, 19, 21, 24T
6-speed | 13, 14, 15, 16, 17, 18T
| 13, 15, 17, 19, 21, 23T

Light Alloy Hub
Model HA-100: Small Flange Hub
DURA-ACE
SPECIFICATIONS
Weight: Front 7.8 oz. (220 g)
Rear/5-speed/10.7 oz. (305 g)
Rear/6-speed/10.9 oz. (310 g)
Material: Duralumin
Type: Quick Release
Thread: 1.37″ x 24 T.P.I.(English)
Available by request 35 x 1.0 (French)
Over Lock Nut Dimensions: Front 3.94″ (100mm)
Rear/5-speed/4.72″ (120mm)
Rear/6-speed/4.96″ (126mm)
Spoke Holes: 28H, 36H
Available by request 24H, 32H, 40H
Polished Ball Race

Model HA-200: Large Flange Hub
DURA-ACE
SPECIFICATIONS
Weight: Front 9.2 oz. (260 g)
Rear/5-speed/11.6 oz. (330 g)
Rear/6-speed/11.8 oz. (335 g)
Material: Duralumin
Type: Quick release
Thread: 1.37″ x 24 T.P.I. (English)
Available by request 35 x 1.0(French)
Over Lock Nut Dimensions: Front 3.94″(100mm)
Rear/5-speed/4.72″ (120mm)
Rear/6-speed/4.96″ (126mm)
Spoke Holes: 28H, 36H
Available by request 24H, 32H, 40H
Polished Ball Race

Front Chainwheel
Model GA-200 (without Bottom Bracket Set)
GB-100 (Bottom Bracket Set)
DURA-ACE
SPECIFICATIONS
Material: 14S Super Duralumin
Type: Cotterless
Chain Ring: 1/2″ x 3/32″ Chain (2mm)
Teeth: Inner Chain Ring 39~48T
Outer Chain Ring 48~55T
Crank Lengths: 6-1/2″ (165mm), 6-3/4″ (170mm), 6-7/8″ (175mm)
Available by request 6-19/32″ (167.5mm), 6-13/16″ (172.5mm)
Crank Thread: 9/16″ x 20t
Cup Thread: English 1.37″ x 24t, French 35 x 1.0, Italian 36 x 24t
Material of Chain Ring:
Standard: 14S Duralumin (For Touring & Light Racing)
Option: 75S Extra Super Duralumin (For Serious Racing)
Spindle Length:
English
BC 1.37″X24t
English
BC 1.37″X24t Left
17 | 68 | 20
112

DURA-ACE Black Series

6

[Dura-Ace Series for Road & Touring: a photograph of a crankset, bottom bracket parts, freewheels and hubs with model labels, beside specification lists for the FA-100 and FA-110 freewheels, HA-100 and HA-200 hubs and the GA-200 and GB-100 chainwheel set. A line drawing of a bottom bracket spindle with dimensions and a small photograph captioned “DURA-ACE Black Series” are also shown.]

— Page 5 —
EQUIPPED WITH
DURA-ACE
SHIMANO
Shimano
DURA-ACE
Series for Road & Touring
Model MA-100
Model BA-100
Model KA-210
Model UA-100
Model NB-100
Model NB-120
Model KD-100
7

Caliper Brake
Model BA-100
DURA-ACE
SPECIFICATIONS
Weight: Front 6.7 oz. (190g)
Rear 6.7 oz. (190g)
Material: Duralumin
Type: Side Pull with Quick
Release and Tire guide
47
57

Brake Lever
Model MA-100
DURA-ACE
SPECIFICATIONS
Weight: 5.2 oz. (150 g)/Pair
Material: Light Alloy
Type: Hooded Lever with Rubber Cover
Lever Clamp Diameter: 23.8ø

Head Parts
Model UA-100
DURA-ACE
SPECIFICATIONS
Material: Chromium Bearing Steel
Type: Road Type
Polished Ball Race

Fork Ends
Model NB-100
SHIMANO-SF
SPECIFICATIONS
Material: Steel
Type: Road Type
With Adjusting Bolt
71°

Model NB-120
SHIMANO-SFR
SPECIFICATIONS
Material: Steel
Type: Touring Type
Vertical Drop Out
70°

DURA-ACE Black Series

Pump Holder
Model KD-100
PUMP HOLDER
SPECIFICATIONS
Clamp Diameter: 1-1/8″
Material: Steel

Outer Band
Model KA-210
OUTER BAND
SPECIFICATIONS
Clamp Diameter: 1″
Material: Steel
8

[Dura-Ace Series for Road & Touring: a photograph of a caliper brake, brake levers with hoods, head parts, a pump holder, outer bands and fork ends with model labels, beside specification lists for models BA-100, MA-100, UA-100, NB-100, NB-120, KD-100 and KA-210. A painted illustration of cyclists in Shimano jerseys and a small photograph captioned “DURA-ACE Black Series” are also shown.]

— Page 6 —
EQUIPPED WITH
DURA-ACE
SHIMANO
Shimano
DURA-ACE
Series for Track
Model GA-100
Model FA-200
Model GB-100
Model NC-100
Model HA-300
Model UA-200
9

Front & Rear Hubs
with Lock Ring
Model HA-300
DURA-ACE
SPECIFICATIONS
Weight: Front 8.5 oz. (240 g) Rear 10.6 oz. (300 g)
Material: Duralumin
Type: Solid Axle
Thread: 1.37″ x 24 T.P.I.
Over Lock Nut Dimensions
Front 3.94″ (100mm)
Rear 4.33″ (110mm), 4.72″ (120mm)
Spoke Holes: 28H, 32H, 36H
Lock Ring Thread: 1.29″ x 24 T.P.I. (Left)
Polished Ball Race

Sprocket for Track Hub
Model FA-200
DURA-ACE
SPECIFICATIONS
Standard Sprocket: 1/2″ x 1/8″ Chain
Thread: 1.37″ x 24 T.P.I.
Material: Chromium Molybdenum Steel
75S Extra Super Duralumin
Teeth: 13, 14, 15, 16.
| Light Alloy | Steel
13 | 0.39 oz. (11.0 g) | 1.07 oz. (30.4 g)
14 | 0.48 oz. (13.5 g) | 1.36 oz. (38.5 g)
15 | 0.55 oz. (15.7 g) | 1.67 oz. (47.3 g)
16 | 0.63 oz. (18.0 g) | 1.89 oz. (53.5 g)

Fork Ends
Model NC-100
SHIMANO-SFP
SPECIFICATIONS
Material: Steel
68°

Head Parts
Model UA-200
DURA-ACE
SPECIFICATIONS
Material: Chromium Bearing Steel
Type: Track Type
Polished Ball Race

Front Chainwheel
Model GA-100 (without Bottom Bracket Set)
GB-100 (Bottom Bracket Set)
DURA-ACE
SPECIFICATIONS
Material: 75S Extra Super Duralumin
Type: Cotterless
Chain Ring: 1/2″ x 1/8″ Chain
Teeth: 45~52T
Crank Lengths: 6-1/2″ (165mm), 6-3/4″ (170mm), 6-7/8″ (175mm)
Available by request 6-19/32″ (167.5mm), 6-13/16″ (172.5mm)
Crank Thread: 9/16″ x 20t
Cup Thread: English 1.37″ x 24t, French 35 x 1.0, Italian 36 x 24t
Spindle Length:
English
BC 1.37″X24t
English
BC 1.37″X24t Left
15.5 | 68 | 15.5
107
10

[Dura-Ace Series for Track: a photograph of a track crankset, sprockets, hubs, fork ends, bottom bracket parts and head parts with model labels, beside specification lists for models HA-300, FA-200, GA-100, GB-100, NC-100 and UA-200. A painted illustration of track cyclists and line drawings of a fork end and a spindle are also shown.]

— Page 7 —
SHIMANO
600
new
Shimano
600 Series
Model DC-200
Model DC-210
Model EC-210
Model EC-200
Model KA-300
Model KB-300
Model KB-160
Model KA-310
Model KA-110
Model LB-180
Model MB-200
Model BB-300
Model BE-100
Model KA-210
11

Rear Derailleur
Model DC-200
SHIMANO-600
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 28 Teeth or Less
Weight: 9.3 oz. (265 g)
Material: Light Alloy (Body)
Steel (Cage Plate)
Type: Servo Panta Mechanism

Model DC-210
SHIMANO-600GS
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 9.9 oz. (280 g)
Material: Light Alloy (Body)
Steel (Cage Plate)
Type: Servo Panta Mechanism

Front Derailleur
Model EC-200
SHIMANO-60
SPECIFICATIONS
Capacity: 14 Teeth or Less
Weight: 3.7 oz. (105 g)
Material: Light Alloy (Body), Steel (Chain Guide)
Type: Lower Inlet Type 1-1/8″

Model EC-210
SHIMANO-60GS
SPECIFICATIONS
Capacity: 18 Teeth or Less
Weight: 4.8 oz. (135 g)
Material: Light Alloy (Body), Steel (Chain Guide)
Type: Lower Inlet Type 1-1/8″

Shifting Lever
Model LB-180
QB-LEVER DX
SPECIFICATIONS
Weight: 3.71 oz. (105 g)
Material: Light Alloy
Type: Double Lever
Lever Clamp Diameter: 1-1/8″

Caliper Brake
Model BB-300
SHIMANO-600
SPECIFICATIONS
Weight: Front 5.8 oz. (165 g)
Rear 5.8 oz. (165 g)
Material: Light Alloy
Type: Side Pull with Quick Release

Model BE-100
CANTILEVER BRAKE
SPECIFICATIONS
Weight: 11.9 oz. (338 g)
Material: Light Alloy and Steel
With Brake Mounting Shaft
Option: Cable Hanger

Brake Lever
Model MB-200
SHIMANO-600
Weight: 5.6 oz. (160 g)/Pair
Material: Light Alloy
Type: Hooded Lever with Rubber Cover
Lever Clamp Diameter: 23.8ø

Cable Parts
Model KB-160
CABLE GUIDE
SPECIFICATIONS
Clamp Diameter: 1-1/8″
Material: Steel
Use: For 10-Speed

Model KA-110
OUTER STOPPER
SPECIFICATIONS
Clamp Diameter: 5/8″
Material: Steel

Brazed on Parts
Model KA-300
CABLE GUIDE
SPECIFICATIONS
Material: Steel

Model KA-310
OUTER STOPPER
SPECIFICATIONS
Material: Steel

Model KB-300
LEVER AXLE
SPECIFICATIONS
Material: Steel
12

[The Shimano 600 Series with a “new” mark: a photograph of 600 derailleurs, shift levers, brake levers, caliper and cantilever brakes, cable parts and outer bands with model labels, beside specification lists for models DC-200, DC-210, EC-200, EC-210, LB-180, BB-300, BE-100 and MB-200 and the cable and brazed on parts.]

— Page 8 —
SHIMANO
600
new
Shimano
600 Series
Model GC-100
Model HB-200
Model GB-200
Model HB-100
Model ND-100
Model NF-100
13

Light Alloy Hub
Model HB-100 (Large Flange Hub)
SHIMANO-600
Weight: Front 9.7 oz. (275 g)
Rear 12.4 oz. (350 g)
Material: Light Alloy
Type: Quick Release
Thread: 1.37″ x 24 T.P.I (English)
Over Lock Nut Dimensions:
Front 3.94″ (100mm), Rear 4.72″ (120mm)
Spoke Holes: 36H

Model HB-200 (Small Flange Hub)
SHIMANO-600
SPECIFICATIONS
Weight: Front 8.3 oz. (235 g)
Rear 12.0 oz. (340 g)
Material: Light Alloy
Type: Quick Release
Thread: 1.37″ x 24 T.P.I (English)
Over Lock Nut Dimensions:
Front 3.94″ (100mm), Rear 4.72″ (120mm)
Spoke Holes: 36H

Fork Ends
Model ND-100
SHIMANO-LF
SPECIFICATIONS
Material: Steel
Option: Axle Stopper Set
65°

Model NF-100
SHIMANO-PR
SPECIFICATIONS
Material: Steel
64°

Front Chainwheel
Model GC-100 (without Bottom Bracket Set)
GB-200 (Bottom Bracket Set)
SHIMANO-600
SPECIFICATIONS
Material: 17S Duralumin
Type: Cotterless
Chain Ring: 1/2″ x 3/32″ Chain (2 mm)
Teeth: 30~53T
Crank Lengths: 6-1/2″ (165 mm), 6-3/4″ (170mm)
Crank Thread: 9/16″ x 20t
Cup Thread: English 1.37″ x 24t,
French 35 x 1.0, Italian 36 x 24t
Material of Chain Ring: 14S Super Duralumin
Available by Request Triple Sprocket
14

[The Shimano 600 Series with a “new” mark: a photograph of a 600 crankset, bottom bracket parts, hubs and fork ends with model labels, beside specification lists for the HB-100 and HB-200 hubs, the ND-100 and NF-100 fork ends and the GC-100 and GB-200 chainwheel set. A painted illustration of four people with two on bicycles and two line drawings of fork ends are also shown.]

— Page 9 —
SHIMANO Rear Derailleur
new
POSITRON
Presently, if you ride with a conventional 10-speed derailleur, you probably have noticed the necessity to continually make minute adjustments of the shifting lever to remain in gear. In fact, many new 10-speed riders do not learn how to center their chain over the rear sprocket, and they ride along with the chain skipping and making noise. Now, with the new Shimano POSITRON Rear Derailleur, anyone can make positive, smooth gear changes with complete accuracy. You don’t need to make minor adjustments.
Model DG-100
POSITRON
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 12.0 oz.(340g)
Material: Steel
Type: Servo Panta Mechanism
With Positron Lever
Model LB-500
POSITRON LEVER
SPECIFICATIONS
Use: Positron Rear Derailleur Only
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Model LB-510
POSITRON-EM
SPECIFICATIONS
Use: Positron Rear Derailleur Only
Attachment Position: Handle Bar
Clamp Diameter: 22.2ø
Type: Clamp or With BRAKE LEVER
15

Model DC-100
SHIMANO-500
SPECIFICATIONS
Capacity: Front Difference
14 Teeth or Less
Rear Largest Sprocket
28 Teeth or Less
Weight: 11.1 oz. (315 g)
Material: Light Alloy and Steel
Type: Servo Panta Mechanism

Model DC-110
SHIMANO-500GS
SPECIFICATIONS
Capacity: Front Difference
14 Teeth or Less
Rear Largest Sprocket
34 Teeth or Less
Weight: 11.9 oz. (340 g)
Material: Light Alloy and Steel
Type: Servo Panta Mechanism

Servo Panta Mechanism
With the servo pantograph system, no matter how the teeth are assembled, or even if the front double gear is used, the distance between the sprocket teeth and the guide pulley remains practically the same. The special automatic movement of the guide pulley leads the chain, so lever operation is light and gear changes are smooth. The cable saver is included on the Lark and Eagle models.

Capacity
A. Front Derailleur Capacity
This represents the range of a front derailleur in terms of the difference in the number of teeth between the largest and the smallest chain rings of the front chainwheel.
EXAMPLE:
Capacity: 14 teeth or less
In this case, the difference should be 14 teeth or less. If it is greater than 15, the front derailleur will not function properly.
B. Rear Derailleur Capacity
This expresses the range of a rear derailleur in terms of the difference in number of teeth between the largest and the smallest chain rings of the front chainwheel and the number of teeth of the largest multiple freewheel sprocket (low side).
EXAMPLE:
Capacity: Front chainwheel difference: 14 teeth or less
Rear Largest Sprocket: (low side) 28 teeth or less
Should this be the case, the difference in tooth number mentioned above must be 14 teeth or less, and the tooth number of the largest multiple freewheel sprocket (low side) 28 or less.
16

[The “SHIMANO Rear Derailleur” section with a “new” mark and a POSITRON badge: a large photograph of the Positron rear derailleur with the POSITRON LEVER and POSITRON-EM controls, and two framed photographs of the DC-100 and DC-110 derailleurs. A blue diagram of chain and pulley positions illustrates the Servo Panta Mechanism.]

— Page 10 —
SHIMANO Rear Derailleur
Model DB-200
TITLIST
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
28 Teeth or Less
Weight: 9.9 oz. (280 g)
Material: Light Alloy (Body), Steel (Cage Plate)
Type: Servo Panta Mechanism
Model DB-300
TOURNEY
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
28 Teeth or Less
Weight: 10.6 oz. (300 g)
Material: Light Alloy and Steel
Type: Servo Panta Mechanism
Model DB-210
TITLIST-GS
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
34 Teeth or Less
Weight: 10.9 oz. (310 g)
Material: Light Alloy (Body),
Steel (Cage Plate)
Type: Servo Panta Mechanism
Model DB-310
TOURNEY-GS
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
34 or Less
Weight: 11.6 oz. (330 g)
Material: Light Alloy and Steel
Type: Servo Panta Mechanism
17

Model DE-100
EAGLE
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
34 Teeth or Less
Weight: 12.3 oz. (350 g)
Material: Steel
Type: Servo Panta Mechanism
With Cable Saver and Derailleur Guard.
Model DE-200
EAGLE-SPO
SPECIFICATIONS
Capacity: Front Difference:
14 Teeth or Less
Rear Largest Sprocket:
34 Teeth or Less
Weight: 12.3 oz. (350 g)
Material: Steel
Type: Servo Panta Mechanism
With Cable Saver and Derailleur Guard.
Model DE-110
EAGLE-GS
SPECIFICATIONS
Capacity: Front Difference:
18 Teeth or Less
Rear Largest Sprocket:
34 Teeth or Less
Weight: 13.4 oz. (380 g)
Material: Steel
Type: Servo Panta Mechanism
With Cable Saver and Derailleur Guard.
Model DE-210
EAGLE-GPO
SPECIFICATIONS
Capacity: Front Difference:
18 Teeth or Less
Rear Largest Sprocket:
34 Teeth or Less
Weight: 13.4 oz (380 g)
Material: Steel
Type: Servo Panta Mechanism
With Cable Saver and Derailleur Guard.
18

[The “SHIMANO Rear Derailleur” section with eight framed photographs of rear derailleurs, each with its specification list: TITLIST, TOURNEY, TITLIST-GS and TOURNEY-GS on the left page and EAGLE, EAGLE-SPO, EAGLE-GS and EAGLE-GPO on the right page.]

— Page 11 —
SHIMANO Rear Derailleur
Model DD-100
LARK-SS
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 11.3 oz. (320 g)
Material: Steel
Type: Servo Panta Mechanism With Cable Saver.
Model DD-500
SKY LARK
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 11.3 oz. (320 g)
Material: Steel
Type: Servo Panta Mechanism
Model DD-200
LARK-SPO
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 10.9 oz. (310 g)
Material: Steel
Type: Servo Panta Mechanism With Cable Saver.
Model DD-300
LARK-W
SPECIFICATIONS
Capacity: Front Difference: 14 Teeth or Less
Rear Largest Sprocket: 34 Teeth or Less
Weight: 12.7 oz. (360 g)
Material: Steel
Type: Servo Panta Mechanism With Special Twist Grip Control Lever.
19
SHIMANO Front Derailleur
Model EC-100
SHIMANO-50
SPECIFICATIONS
Capacity: 14 Teeth or Less
Weight: 4.4 oz (125g)
Material: Steel
Type: Lower Inlet Type 1″
Lower Inlet Type 1-1/8″
Model ED-100
THUNDER BIRD
SPECIFICATIONS
Capacity: 16 Teeth or Less
Weight: 6.7 oz. (190 g)
Material: Steel
Type: Upper Inlet Type 1″ Upper Inlet Type 1-1/8″
Lower Inlet Type 1″ Lower Inlet Type 1-1/8″
Model EB-100
TITLIST
SPECIFICATIONS
Capacity: 16 Teeth or Less
Weight: 4.9 oz. (140 g)
Material: Light Alloy (Body), Steel (Chain Guide)
Type: Lower Inlet Type 1-1/8″
Lower Inlet Type 1″
Model ED-200
THUNDER BIRD GPO
SPECIFICATIONS
Capacity: 16 Teeth or Less
Weight: 6.5 oz. (185 g)
Material: Steel
Type: Upper Inlet Type 1″ Upper Inlet Type 1-1/8″
Lower Inlet Type 1″ Lower Inlet Type 1-1/8″
20

[Spread with four SHIMANO rear derailleurs (Lark-SS, Sky Lark, Lark-SPO, Lark-W) on the left and four front derailleurs (Shimano-50, Thunder Bird, Titlist, Thunder Bird GPO) on the right, each in a photograph with its specifications. Two rusted staples show in the gutter.]

— Page 12 —
SHIMANO Shifting Lever
new
Model LB-160
QB-LEVER
SPECIFICATIONS
Material: Light Alloy
Type: Friction Type
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
new
Model LB-170
QP-LEVER
SPECIFICATIONS
Material: Resin
Type: Friction Type
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″ 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″ 1-1/8″
| Handle Stem | 0.833″
new
Model LB-150
QS-LEVER
SPECIFICATIONS
Material: Light Alloy
Type: Friction Type
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Model LB-100
ALMI LEVER
SPECIFICATIONS
Material: Light Alloy
Type: Friction Type
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
21
FINGER-TIP
The lever with the spiral spring is epoch-making with its function of offsetting the derailleur spring resistance. The lever is operated easily, effectively and swiftly.
SUPER SHIFTER
UNI SHIFT
SUPER SHIFTER & UNI SHIFT
One-way clutches designed for light lever action. A specially designed cam is built into the SUPER SHIFTER. The UNI SHIFT incorporates a special spring.
Model LB-300
SUPER SHIFTER
SPECIFICATIONS
Material: Light Alloy
Type: One Way Clutch (With Special Cam)
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Model LB-400
FINGER-TIP
SPECIFICATIONS
Material: Light Alloy
Type: With Spiral Spring (Balance Spring)
Type | Attachment Position | Clamp Diameter
Double Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down and Top Tube | 1″, 1-1/8″
| Handle Stem | 0.833″
Model LB-200
UNI SHIFT
SPECIFICATIONS
Material: Light Alloy
Type: One Way Clutch (With Special Spring)
Type | Attachment Position | Clamp Diameter
Double Lever | Down Tube | 1-1/8″
| Handle Stem | 0.833″
Single Lever | Down Tube | 1-1/8″
| Handle Stem | 0.833″
22

[Spread headed SHIMANO Shifting Lever with six lever models (QB-Lever, QP-Lever, QS-Lever, Almi Lever, Super Shifter, Finger-Tip, Uni Shift) in photographs with attachment and clamp tables, and exploded drawings of the Finger-Tip, Super Shifter and Uni Shift. Three left-page models carry a “new” flash; a small pen mark in pink ink sits under the model number of the Almi Lever.]

— Page 13 —
SHIMANO Shifting Lever
Model LD-400
W-GRIP CONTROL LEVER
SPECIFICATIONS
Use: 5-Speed Lark-W Derailleur Only
Attachment Position: Handle Bar
Model LD-200
TRIGGER LEVER
SPECIFICATIONS
Use: Three Speed Hub
Attachment Position: Handle Bar
Model LD-300
TWIST GRIP CONTROL
SPECIFICATIONS
Use: Three Speed Hub
Attachment Position: Handle Bar-End
23
SHIMANO Freewheel
A new wide range of freewheels has just been introduced by Shimano. This rear cluster has a broad range of gears, for example, starting with 14, and going to 17-22-28 and 34 teeth. Available in Regular Type; with Top Protector, with Seal and Alternate Teeth Type. Easily removed from the hub with a special tool. The spline system makes it possible to change the sprockets. Every other tooth in the two ultra-low (big) gears has been removed. This makes it easier to shift up into these low gears because the chain does not “hang up”.
Alternate type
Ordinary type
Models FC-300 (Standard)
FC-330 (with Seal & Top Protector)
MULTIPLE FREEWHEEL
SPECIFICATIONS
Standard Sprocket: 1/2″ x 3/32″ Chain (2mm)
Thread: 1.37″ x 24″ T.P.I.
Standard Sprocket Combinations: 5-speed
15, 17, 19, 21, 24T | 14, 17, 21, 26A, 32AT (LT)
14, 17, 20, 24, 28T | 14, 17, 22, 28A, 34AT
14, 17, 22, 27, 32T | 14, 17, 22, 28A, 34AT (LT)
14, 17, 21, 26A, 32AT
(LT): with Seal and Top Protector
A : Alternate Teeth Sprocket
Model FB-100
SINGLE FREEWHEEL
Thread: 1.37″ x 24 T.P.I.
Sprocket
1/2″ x 1/8″ x 16 teeth | 1/2″ x 1/8″ x 20 teeth
1/2″ x 1/8″ x 18 teeth | 1/2″ x 1/8″ x 22 teeth
1/2″ x 1/8″ x 19 teeth | 1/2″ x 1/8″ x 24 teeth
24

[Left page with three SHIMANO shifting levers (W-Grip Control Lever, Trigger Lever, Twist Grip Control) and a painted illustration of cyclists with bicycles; right page headed Freewheel with the Multiple Freewheel and Single Freewheel, two photographs of alternate and ordinary types, and a paragraph on new freewheels. Faint small marks sit in the gutter.]

— Page 14 —
SHIMANO Hub
new
Model HC-210
SMALL FLANGE HUB
WITH QUICK RELEASE
SPECIFICATIONS
Weight: Front 8.3 oz.(235 g), Rear 12.3 oz.(350 g)
Material: Light Alloy
Type: Quick Release
Thread: 1.37″ x 24 T.P.I.
Over Lock Nut Dimensions:
Front 3.78″ (96mm), Rear 4.88″ (124mm)
Spoke Holes: 36 x 36H
new
Model HC-200
SMALL FLANGE HUB
SPECIFICATIONS
Weight: Front 6.3 oz.(180 g), Rear 10.9 oz.(310 g)
Material: Light Alloy
Type: Solid Axle Type with Hub Nut
Thread: 1.37″ x 24 T.P.I.
Over Lock Nut Dimensions:
Front 3.66″ (93mm), Rear 4.88″ (124mm)
Spoke Holes: 36 x 36H
25
Model HC-110
LARGE FLANGE HUB
WITH QUICK RELEASE
SPECIFICATIONS
Weight: Front 9.5 oz. (270 g), Rear 12.7 oz. (360 g)
Material: Light Alloy
Type: Quick Release
Thread: 1.37″ x 24 T.P.I.
Over Lock Nut Dimensions:
Front 3.78″ (96mm), Rear 4.88″(124mm)
Spoke Holes: 36 x 36H
Model HC-100
LARGE FLANGE HUB
SPECIFICATIONS
Weight: Front 7.4 oz. (210 g), Rear 11.6 oz. (330 g)
Material: Light Alloy
Type: Solid Axle Type with Hub Nut
Thread: 1.37″ x 24 T.P.I.
Over Lock Nut Dimensions:
Front 3.66″ (93mm), Rear 4.88″ (124mm)
Spoke Holes: 36 x 36H
Model HC-120
LARGE FLANGE HUB
WITH WING NUT
SPECIFICATIONS
Weight: Front 8.2 oz. (230 g), Rear 12.3 oz. (350 g)
Material: Light Alloy
Type: Solid Axle Type with Wing Nut
Over Lock Nut Dimensions:
Front 3.66″ (93mm), Rear 4.88″ (124mm)
Spoke Holes: 36 x 36H
Model HD-100
STEEL HUB
SPECIFICATIONS
Weight: 15.9 oz. (450 g)
Material: Steel
Type: Solid Axle with Hub Nut
Over Lock Nut Dimensions:
Front 3.66″ (93mm), Rear 4.88″ (124mm)
Spoke Holes: 28H and 36H
26

[Spread headed SHIMANO Hub with six hub models (HC-210, HC-200, HC-110, HC-100, HC-120 and HD-100) as front and rear hub pairs in photographs with specifications. The two left-page models carry a “new” flash.]

— Page 15 —
SHIMANO Caliper Brake
new
auto adjust
The AUTO ADJUST is designed to execute the automatic compensation of the rim-brake shoe clearances which change as brake shoes are worn or the brake wire is stretched. With the AUTO ADJUST, an optimum gap can always be maintained between the brake lever and the handle bar. As a result, greater riding safety is insured.
Auto Adjust
Model BB-210
TOURNEY
SPECIFICATIONS
Material: Light Alloy
Type: Caliper Brake
Side Pull
Callouts: A A’
Type | A-A’ | Weight (Pair)
CS-72A | 54mm—72mm | 11.5 oz. (325 g)
CS-79A | 61mm—79mm | 11.8 oz. (335 g)
CS-88A | 70mm—88mm | 12.2 oz. (345 g)
Model BB-110
TOURNEY
SPECIFICATIONS
Material: Light Alloy
Type: Caliper Brake Center Pull
Callouts: A A’
Type | A-A’ | Weight (Pair)
CC-65A | 47mm—65mm | 18.2 oz. (515 g)
CC-75A | 57mm—75mm | 18.5 oz. (525 g)
27
Caliper Brake
Model BB-200
TOURNEY
SPECIFICATIONS
Material: Light Alloy
Type: Caliper Brake
Side Pull
Callouts: A A’
Type | A-A’ | Weight (Pair)
CS-72 | 54mm—72mm | 10.1 oz. (285 g)
CS-79 | 61mm—79mm | 10.4 oz. (295 g)
CS-82 | 70mm—88mm | 10.8 oz. (305 g)
Model BB-100
TOURNEY
SPECIFICATIONS
Material: Light Alloy
Type: Caliper Brake
Center Pull
Callouts: A A’
Type | A-A’ | Weight (Pair)
CC-65 | 47mm—65mm | 12.7 oz. (360 g)
CC-75 | 57mm—75mm | 13.1 oz. (370 g)
Brake Lever
Model MD-100
POPULAR LEVER
SPECIFICATIONS
Material: Light Alloy
Clamp Diameter: 22.2φ
Model MC-100
TOURIST LEVER
SPECIFICATIONS
Material: Light Alloy
Clamp Diameter: 22.2φ
Model MB-100
HOODED LEVER
SPECIFICATIONS
Material: Light Alloy
Clamp Diameter: 22.2φ, 23.8φ
Model MB-110
DUAL EXTENSION LEVER
SPECIFICATIONS
Material: Light Alloy
Clamp Diameter: 22.2φ, 23.8φ
28

[Spread headed SHIMANO Caliper Brake showing the Auto Adjust Tourney brakes BB-210 and BB-110 with a “new auto adjust” emblem, then the Tourney BB-200 and BB-100 brakes, each with a drawing and a size and weight table, and a Brake Lever panel with the Popular, Tourist, Hooded and Dual Extension levers.]

— Page 16 —
SHIMANO Coaster Brake
new
Model CC-100
MIGHTY MITE
Economical Coaster Brake with lightweight and compact design. Safe and easy to operate for children weighing less than 70 pounds.
SPECIFICATIONS
Weight: 21.0 oz. (595 g)
Teeth: 14, 15, 16, 18, 19, 20
Over Lock Nut Dimension: 4.29″ (109mm)
Sprocket: For 1/2″ x 1/8″ Chain
Spoke Holes: 20H, 24H, 28H
Riders Weight: 70 lb or less
Wheel: 20″ or less
Model CB-100
COASTER BRAKE B TYPE
SPECIFICATIONS
Weight: 30.0 oz.(850g)
Teeth: 14, 15, 16, 18,19, 20
Over Lock Nut Dimension:4.29″ (109mm)
Sprocket: 1/2″ x 1/8″ Chain
Spoke Holes: 20H, 24H, 28H, 36H
29
SHIMANO Hub Gear
Model TB-100
THREE SPEED HUB
SPECIFICATIONS
Weight: 38.8 oz. (1,100 g)
Teeth: 14, 15, 16, 18, 19, 20
Gear Ratio: (H) 1:1.33 (N) 1:1 (L) 1:0.75
Over Lock Nut Dimension: 4.37″ (110.9mm)
Sprocket: 1/2″ x 1/8″ Chain
Spoke Holes: 28H, 36H
Model TC-100
THREE SPEED COASTER BRAKE
CARTRIDGE TYPE
SPECIFICATIONS
Weight: 47.5 oz. (1,320 g)
Teeth: 14, 15, 16, 18, 19, 20
Gear Ratio: (H) 1:1.33 (N) 1:1 (L) 1:0.75
Over Lock Nut Dimension: 4.76″ (120.0mm)
Sprocket: 1/2″ x 1/8″ Chain
Spoke Holes: 28H, 36H
Model AB-100
AUTOMATIC 2-SPEED HUB
With the “Auto-2″ the gear shifts automatically from low to high and vice versa according to the running speed of the bicycle. No shifting is required, so even a beginner can use it for easier, safer cycling.
SPECIFICATIONS
Weight: 49.4 oz. (1,400 g)
Teeth: 14, 15, 16, 18, 19, 20
Gear Ratio: (H) 1:1 (L) 1:0.74
Over Lock Nut Dimension: 4.40″ (112.0mm)
Sprocket: 1/2″ x 1/8” Chain
Spoke Holes: 28H, 36H
30

[Spread with the Coaster Brake page (Mighty Mite CC-100 with a “new” flash, and Coaster Brake B Type CB-100) and the Hub Gear page (Three Speed Hub TB-100, Three Speed Coaster Brake Cartridge Type TC-100 and Automatic 2-Speed Hub AB-100), each in a photograph with its specifications.]

— Page 17 —
SHIMANO Disc Brake
new
Model BC-300
DISC BRAKE WITH AUTO ADJUST
Features
*Strong Braking Force
Free from braking shocks. The bicycle stops smoothly and surely. Superior in braking force to any other type of brake.
*No Slippage Even in Rain
Rain or shine, there is almost no change in braking efficiency, thanks to a unique design. This means greater safety for cyclists.
*Long Pad (Friction Plate) Life
The pads are made of special material to increase wear resistance. Their service life is greatly extended.
*Easy Installation and Adjustment
Marked mechanical improvements have been made and the design has been simplified for quicker and easier installation, adjustment and pad replacement.
31
Model BC-200
HYDRAULIC DISC BRAKE
Features
*Outstanding All-Weather Performance
Its performance is outstanding under all road conditions and remains consistently high, rain or shine. The brake pads clamp the brake disc securely even when soaked wet with rain water. Because the brake is applied hydraulically, there is no danger of wheel locking, causing the bicycle to skid.
*No loss of transmitted braking power
The hydraulic transmission braking system is free from power loss due to cable friction or other causes.
*Smooth and shockless
A powerful braking force free of the danger of locking wheels means that bicycle comes to a stop smoothly and without shock. There is no danger of skidding or failing in emergency stops.
*Rust-proof
Made of stainless steel, the brake disc always remains completely free of rust.
*High durability
The brake pads developed especially by SHIMANO for this hydraulic disc brake feature marked durability and withstand the severest punishment.
*Strong, resilient nylon hose
The nylon connecting hose employed in the hydraulic system is strong and resilient.
SHIMANO Protector
Model PB-130
SPOKE PROTECTOR
SPECIFICATIONS
Diameter: 7-1/2″ (190mm)
Use Range: Low Sprocket 26 & 28 teeth
Model PB-140
SPOKE PROTECTOR
SPECIFICATIONS
Diameter: 8-1/2″ (215mm)
Use Range: Low Sprocket 32 & 34 teeth
Spoke & Nipple
32

[Spread with the SHIMANO Disc Brake page (BC-300 Disc Brake with Auto Adjust under a “new” flash, with a photograph of the brake on a rear wheel and a hub and ring) and the BC-200 Hydraulic Disc Brake, then the Protector page with Spoke Protector PB-130 and PB-140 and a Spoke & Nipple panel with a drawing of spokes and nipples.]

— Page 18 —
SHIMANO Small Parts
SHIMANO
DURA-ACE
SPARE PARTS
SHIMANO INDUSTRIAL CO.,LTD.
MADE IN JAPAN
Item | Package Style | Contents | Q’ty
Sprocket for Front Chainwheel | Blister Packed | Sprocket | 1
Brake Shoe Set | Blister Packed | Brake Shoe Complete (left) | 2
| | Brake Shoe Complete (right) | 2
Outer Band Set for Caliper Brake | Polyester Bag with Header | Outer Band | 3
| | Bolt | 3
| | Nut | 3
Complete Quick Release Unit for Front Hub (Over Lock Nut Dimension: 100mm) | Polyester Bag with Header | Hub Axle Set | 5
| | Quick Release Set | 5
Complete Quick Release Unit for Rear Hub (Over Lock Nut Dimension : 120mm/ 5-speed, 126mm/6-speed) | Polyester Bag with Header | Hub Axle Set | 5
| | Quick Release Set | 5
Rubber Cover Set for Brake Lever | Polyester Bag with Header | Rubber Cover Set | 2
Crank Arm Dust Cap for Front Chainwheel | Blister Packed | Crank Arm Dust Cap | 15
Adjusting Bolt, Nut, and Spring for Fork End | Polyester Bag with Header | Adjusting Bolt | 2
| | Nut | 2
| | Spring | 2
Ball Retainer for Head Parts | Special Polyester Case | Ball Retainer | 2
Ball Retainer for Bottom Bracket | Blister Packed | Ball Retainer | 20
Bottom Bracket Spindle Set for Front Chainwheel | Package | Spindle | 1
| | Ball Retainer | 2
| | L.H. Adjustable Cap | 1
| | Lock Ring | 1
| | R.H. Fixed Cap | 1
| | Spindle Bolt | 2
| | Spindle Washer | 2
Crank Set for Front Chainwheel | Package | Left Crank Arm | 1
| | Right Crank Arm | 1
| | Crank Arm Dust Cap | 2
| | Chainwheel Fixing Bolt | 5
| | Chainwheel Fixing Nut | 5
Other small parts are also available.
33
SHIMANO Genuine parts
Item | Package Style | Contents | Q’ty
Lever Parts | Card | Wing Screw | 30
| | Spring Washer | 30
| | Non-Turn Washer | 30
| | Pressure Plate | 30
| | Washer | 60
Pulley Set for Rear Derailleur | Card | Pulley Bushing | 30
| | Pulley | 30
| | Pulley Cap | 60
Cable Fixing Bolt Set for Rear Derailleur | Card | Cable Fixing Bolt | 50
| | Cable Fixing Washer | 50
| | Cable Fixing Nut | 50
Adapter Screw Set for Rear Derailleur | Card | Adapter Nut | 50
| | Adapter Screw | 50
Derailleur Cap Set | Card | Derailleur Cap | 100
Cable Fixing Bolt Set | Card | Cable Fixing Bolt | 50
| | Cable Fixing Nut | 50
| | Cable Fixing Washer | 50
Chain Guide Bushing Set | Card | Chain Guide Spacer Bolt | 50
| | Chain Guide Spacer | 50
| | Toothed Lock Washer | 50
| | Nut | 50
Brake Shoe Set for Caliper Brake | Card | Brake Shoe Complete (left) | 10
| | Brake Shoe Complete (right) | 10
Cable Anchor Set for Side Pull Caliper Brake (Tourney) | Card | Cable Anchor Bolt | 50
| | Washer | 50
| | Cap Nut | 50
Item | Package Style | Contents | Q’ty
Cable Carrier Set for Center Pull Caliper Brake (Tourney) | Card | Cable Anchor Bolt | 50
| | Cable Carrier | 50
| | Cable Anchor Washer | 50
| | Cable Anchor Nut | 50
Outer Band Set for Caliper Brake(Tourney) | Card | Outer Band | 60
| | Screw | 60
Outer Clip Set for Caliper Brake | Card | Outer Clip | 60
Bell Crank Set for Three-Speed Hub | Card | Bell Crank | 20
| | Bell Crank Lock Nut | 20
Three-Speed Hub Axle | Polyester Bag with Header | Three-Speed Hub Axle | 1
Tension Spring for Rear Derailleur | Polyester Bag with Header | P-Tension Spring | 1
| | B-Tension Spring | 1
Wing Nut for Hub | Polyester Bag with Header | Wing Nut for Front Hub BC 5/16″ | 2
| | Wing Nut for Rear Hub BC 3/8″ | 2
Complete Quick Release Unit for Hub Over Lock Nut Dimension : 96mm (Front) 124mm (Rear) | Polyester Bag | Complete Quick Release Unit (Front or Rear) | 10
Hub Axle Set | Polyester Bag | Hub Axle Set (Front or Rear) | 10
Sprocket for Multiple Freewheel | Vacuum Packed | Sprocket | 1
Other small parts are also available.
34

[Spread headed SHIMANO Small Parts: on the left a photograph of Dura-Ace spare parts in packages (chainwheels, special grease, bottom brackets, hubs) with a parts table, and a yellow “DURA-ACE SPARE PARTS” label at the top; on the right a photograph of Genuine parts packages and tools with two parts tables, and a blue “SHIMANO Genuine parts” label at the top right.]

— Page 19 —
SHIMANO Outer Band
Callouts: ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱ ⑲ ⑳
Item No. | Part No. | Description
① | 62010700 | Outer Clip 1-1/8″ (28.6)
| 62010500 | Outer Clip 1″ (25.4)
② | 62010800 | Outer Clip 1-1/8″ (28.6)
| 62010600 | Outer Clip 1″ (25.4)
③ | 62010400 | Outer Clip 7/8″ (22.2)
| 62010300 | Outer Clip 3/4″ (19.0)
| 62010200 | Outer Clip 5/8″ (15.9)
| 62010100 | Outer Clip 1/2″ (12.7)
④ | 62011100 | Outer Clip 1″ (25.4)
| 62011000 | Outer Clip 3/4″ (19.0)
⑤ | 62291101 | Cable Guide 1-1/8″ (28.6)
| 68719010 | Cable Guide 1-1/8″ (28.6)
⑥ | 62290101 | Cable Guide 1-1/8″ (28.6)
| 68719000 | Cable Guide 1-1/8″ (28.6)
⑦ | 83190110 | Outer Band 1″ (25.4)
⑧ | 68711010 | Outer Band for Positron 1″ (25.4)
| 68711030 | Outer Band for Positron (Black) 1″ (25.4)
| 68712010 | Outer Band for Positron 1-1/8″ (28.6)
| 68712030 | Outer Band for Positron (Black) 1-1/8″ (28.6)
⑨ | 68711000 | Outer Band for Positron 1″ (25.4)
| 68711020 | Outer Band for Positron 1″ (25.4)
| 68712000 | Outer Band for Positron 1-1/8″ (28.6)
| 68712020 | Outer Band for Positron 1-1/8″ (28.6)
⑩ | 65191040 | Outer Band 1-1/8″ (28.6)
| 65191030 | Outer Band 1″ (25.4)
Item No. | Part No. | Description
⑪ | 65191060 | Outer Band 5/8″ (15.9)
⑫ | 68713000 | Outer Band for Positron φ15, φ16, φ17.5
| 68713010 | Outer Band for Positron (Black) φ15, φ16, φ17.5
| 68713020 | Outer Band for Positron φ19, φ22.2
| 68713030 | Outer Band for Positron (Black) φ19, φ22.2
⑬ | 65191070 | Outer Band 1/2″ (12.7)
| 65191080 | Outer Band 7/16″ (11.1)
⑭ | 61105010 | Almi Band 5.9″ (150)
| 61105000 | Almi Band 4.52″ (115)
| 61106000 | Almi Band 3.14″ (80)
⑮ | 61190052 | Stopper Band 1-1/8″ (28.6)
| 61190062 | Stopper Band 1″ (25.4)
| 61190101 | Stopper Band 3/4″ (19.0)
| 61190111 | Stopper Band 11/16″ (17.5)
| 64390441 | Stopper Band 5/8″ (15.9)
| 64390451 | Stopper Band 1/2″ (12.7)
⑯ | 62291061 | Outer Stopper 1-1/8″ (28.6)
| 68720000 | Outer Stopper for Positron 1-1/8″ (28.6)
⑰ | 62291061 | Outer Stopper 1-1/8″ (28.6)
| 68720010 | Outer Stopper for Positron 1-1/8″ (28.6)
⑱ | 62291141 | Outer Stopper 5/8″ (15.9)
| 68717000 | Outer Stopper for Positron 5/8″ (15.9)
⑲ | 61190011 | Guide Roller 1-1/8″ (28.6)
⑳ | 61190022 | Guide Roller 1″ (25.4)
35
SHIMANO Special Tool
Model XB-310
Plier for Three Speed Hub snap ring removal
Model XA-110
Spanner for DURA-ACE Hubs
Model XB-300
Spanner for cone, lock nut adjustment of Three Speed Hub; Three Speed Hub with Coaster Brake; and Coaster Brake
Model XA-150 (5mm)
Model XB-100 (6mm)
Hexagon wrench keys
Model XA-160
(5mm Key x 8mm Hole)
Model XA-170
(6mm Key x 10mm Hole)
T-Type Wrench with Hexagon Wrench key
Model XA-100
DURA-ACE Multiple Freewheel Removal Tool
Model XB-200
Boss type Multiple Freewheel Removal Tool
Model XB-320
Tool for removing ball cup for Three Speed Hub
Model XA-130
Cotterless crank extractor
Model XA-120
DURA-ACE Grease
Model XA-140
Chainwheel screw peg spanner
36

[Left page headed SHIMANO Outer Band with line drawings of 20 numbered outer clips, bands, cable guides, stoppers and guide rollers above two pink parts tables; right page headed SHIMANO Special Tool with photographs of 12 tools (pliers, spanners, hexagon wrench keys, T-type wrenches, freewheel removal tools, a crank extractor and a tin of grease) on pale blue panels.]

— Page 20 (back cover) —
SHIMANO INDUSTRIAL CO.,LTD.
Established: February, 1921
Capital: ¥1,932,612,000 (about $6,442,000)
Number of Employees: 1,200
Head Office and Main Plant:
Shimano Industrial Co., Ltd.
3-77 Oimatsucho, Sakai, Osaka, Japan
Total Area: 37,308 sq. meters
Plant: 36,247 sq. meters
Tokyo Office:
Shimano Industrial Co., Ltd.
1-17-17 Omori-Minami, Ohtaku, Tokyo, Japan
Nagoya Office:
Shimano Industrial Co., Ltd.
2-37-1 Otobashidori, Nakagawaku, Nagoya, Japan
American Office:
Shimano American Corporation
1133 Avenue of the Americas,New York, New York 10036
TEL: (212) 586-2350
TELEX: 23224069 SACN UR
Shimano Sales Corporation
9259 San Fernando Road, Sun Valley, California 91352
TEL: (213) 767-7777
European Office:
Shimano (Europa) GmbH.
4 Düsseldorf 1, Hüttenstrasse 5, West Germany
TEL: 372007/08
TELEX: 8587249 SEGH D
Shimonoseki Plant:
Shimano Yamaguchi Co., Ltd.
1414 Higashishinden, Ozukicho, Shimonoseki, Yamaguchi, Japan
Total Area: 127,303 sq. meters
Plant: 12,163 sq. meters
Singapore Plant:
Shimano (Singapore) Pte. Ltd.
Lot A3014 at Benoi Sector, Jurong Town, Singapore
Tokyo Plant:
Shimano Adachi Co., Ltd.
1-50-26 Ogimachi, Adachiku, Tokyo, Japan
Total Area: 386 sq. meters
Plant: 317 sq. meters
Service Centers (Fishing Tackle):
Sapporo, Sendai, Tokyo, Nagoya, Tokushima, Fukuoka, Hiroshima, Osaka
NFT:
Nippon Fishing Tackle Co., Ltd.
2-37-5 Kamiuma, Setagayaku, Tokyo, Japan
37

[The left page lists the addresses, plants and offices of SHIMANO INDUSTRIAL CO.,LTD. in text; the right page is the plain black back cover with no lettering, creased along the gutter.]