The Miyata Bicycle Catalogue 1980 (Miyata, Japan)

Catalog 1980 9 pages Japan

Source: ragandbone.ca (Rag & Bone Puppet Theatre, Miyata catalogue pages), "1980 Miyata Catalog.pdf"; no scanner named; enlarged for Ebykr.

About this document

MarqueMiyata
TypeCatalog
Year1980
PublisherMiyata (Japan)
CountryJapan
LanguageEnglish
Pages9
Sourceragandbone.ca (Rag & Bone Puppet Theatre, Miyata catalogue pages), "1980 Miyata Catalog.pdf"; no scanner named; enlarged for Ebykr.
Creditragandbone.ca
IdentifierPermalink https://www.ragandbone.ca/Miyata/miyata_selector.html#1980%20Miyata%20Catalog.pdf
TranscriptionTranscribed by eye
Cite this document

Reference

Miyata (Japan). The Miyata Bicycle Catalogue 1980 (Miyata, Japan). 1980. Ebykr, https://ebykr.com/library/miyata-catalog-1980/.

Wikipedia

{{cite book |title=The Miyata Bicycle Catalogue 1980 (Miyata, Japan) |publisher=Miyata (Japan) |date=1980 |url=https://ebykr.com/library/miyata-catalog-1980/ |via=Ebykr |access-date=}}

Transcription

THE MIYATA BICYCLE CATALOGUE 1980, from the Miyata catalogue pages kept by Rag & Bone Puppet Theatre (Ottawa). The PDF has almost no usable text layer, so the text below was transcribed by hand from the page images (2026-11-22), page by page, as printed, misprints kept; marks the places a neighboring sheet or damage hides …

Read the full transcription (9 pages)

THE MIYATA BICYCLE CATALOGUE 1980, from the Miyata catalogue pages kept by Rag & Bone Puppet Theatre (Ottawa). The PDF has almost no usable text layer, so the text below was transcribed by hand from the page images (2026-11-22), page by page, as printed, misprints kept; [illegible] marks the places a neighboring sheet or damage hides the type. Pages are in the PDF’s order (9 pages; the ninth is the landscape model specification table).

[Page 1]
MIYATA (red gear-wheel logo with M, blue logotype)
RACING SPECIALISTS OF THE WORLD
[Cover: gray panel with a collage of photographs of racing cyclists, a team car lettered “KOGA MIYATA” with the line “RACING-SPECIALISTS OF THE WORLD”, a trade-show stand with a banner “RENNERS OP KOGA-MIYATA”, and a large team photograph of riders in yellow jerseys lettered “IJSBOERKE KOGA MIYATA WARNCKE”. No year, title or edition line is printed on this page.]

1 – Daniël Willems, 2 – Uwe Bolten, 3 – Theo de Rooy,
4 – Andre Dierickx, 5 – Ludwig Wijnands, 6 – Dirk Wayenberg,
7 – Pol Verschuren, 8 – Ludo Peeters, 9 – Rudi Pevenage,
10 – Jos van den Poel, 11 – Ludo Delcroix, 12 – Marc Demeyer,
13 – Gery Verlinden, 14 – Eric van den Wiele, 15 – Staf van
Roosbroeck, 16 – Ronny Claes, 17 – Jos Jacobs, 18 – Guido
van Sweevelt, 19 – Rudi Colman, 20 – Willy de Geest
Technical manager: A – Jos Jansen, B – Willy Jossart, C –
Walter Godefroot, D – Hans van Vliet.

IJSBOERKE-KOGA-MIYATA-WARNCKE PROFESSIONAL TEAM
[Small key drawing of the group with the numbers 1 to 20 and the letters A to D, to the left of the name list.]

[Page 2]
miyata
Model 1000

The model 1000 is truly an ultra efficient touring bicycle. It is designed to take you across town or across the country. The frame is constructed of straight guage chrome molybdenum tubing for even flex and maximum strength under load. The long wheel base provides to help smooth riding on rough roads. A 40 spoke rear wheel is provided to increase wheel strength where it is most needed. In addition; cantilever brakes are brazed onto the frame providing the most efficient braking system possible under any condition. All cycling conditions are easily managed with a total of 15 gear choices achieved by using a triple front gear and 5 speed rear cluster. This combination allows maximum gear distribution while providing accurate chain alignment through the greatest range of gears. The Miyata 1000 is the most outstanding machine ever designed.

Frame colors
Royal blue
Burgundy

Frame Sizes : men’s 23″
[Frame diagram: 568, 73°, 73°, 1026, 430, 603.5]
[Photographs: the complete bicycle with front and rear carriers; a close-up of the cantilever brake and rear carrier. Handwritten in blue ink beside the handlebar: 434. This is an annotation, not print.]
[A strip down the right edge of the scan shows bleed from a neighboring sheet; no text is readable there.]

[Page 3]
miyata
Model 912

A custom built bicycle of exceptional quality for the serious cycling enthusiast. Designed with racing in mind, the 912 offers everything desirable.
The frame is built with Tange 4140 double butted chrome molybdenum tubing using Miyata’s latest techniques of hand brazing. The head and seat angles are 73×74 degrees. The lugs are special long pointed style hand filed to mesh perfectly to the frame tubing.
The rims are Araya model 20 A, specially designed for their superior strength and lightweight. The added feature of using 700x25C tires and rims allows the rider to interchange with the tubular racing style wheels.
The excellent component features include Tange New Levin head set and complete Shimano 600-EX road group. Accessories included are the plastic water bottle with alloy cage, toe clips, and straps.

Frame colors
Black
Orange

Frame Sizes : men’s 23″
[Frame diagram: 550, 74°, 73°, 1003, 596, 415]
[Photographs: the complete bicycle; a close-up of the seat cluster; a close-up of an Araya rim.]
[Handwritten in blue ink beside the handlebar: 398. Annotation, not print.]

[Page 4]
miyata
Model 710

Miyata uses the same high performance design as the model 310 but adds 4140 double butted chrome molybdenum tubing, tapered rear stays, and special Suntour GS adjustable rear dropouts. This model includes several brazed on features such as cable guides, downtube stop for shift levers, and a water bottle mount. These features have been brazed on the Model 710 to prevent loosening from vibration and to enhance its appealing appearance.
Light alloy rims with 90 lbs. tires provide easy rolling on any surface you choose. For fast removal both wheels come with quick release hubs.
The model 710 is for the more sophisticated sport rider or commuter minded enthusiast who wants typical quality in every detail. Quality you expect with convenience you demand the Miyata 710 has it all.

Frame Sizes : men’s 23″
[Frame diagram: 550, 74°, 73°, 1003, 415, 596]
Frame colors
Ming Brown
Camel Beige
[Photographs: the complete bicycle in cream; a close-up of the crank and bottom bracket; a close-up of the seat pillar and seat lug. Handwritten in ink beside the handlebar: 304. Annotation, not print.]

miyata
Model 610

The model 610 is designed to satisfy the cost conscious cyclist who is unwilling to accept compromise in material, quality or design. Because of this, the frame is constructed from 4140 chrome molybdenum tubing. This is the finest available for producing a lightweight extremely strong frame. Miyata has also added brazed on cable guides for a more professional appearance. Extensive use of the latest design in alloy components gives the rider everything he needs for cycling enjoyment.

Frame Sizes : men’s 23″
[Frame diagram: 565, 73°, 73°, 1021, 430, 600]
Frame colors
Silver
Black
Burgundy
[Photographs: the complete bicycle in black; a close-up of a cable guide on the top tube; a close-up of the seat lug with a Tange Champion decal. Handwritten in ink beside the handlebar: 269. Annotation, not print.]

[Page 5]
miyata
Model 310

This is the first Miyata bicycle in the line that caters to the more serious rider. Whether it be for racing, commuting, or just for fun, the 310 is the ideal bicycle. The frame on this model is made to provide a shorter overall wheelbase than model 210. This provides a more responsive cycle because there is less flexibility in the frame which allows more energy to be transferred from the pedals to the wheels.
The weight of the model 310 bicycle has been substantially reduced due to the greater use of lighter alloy components including rims, handlebars, and derailleurs.

Frame Sizes : men’s 23″
[Frame diagram: 565, 73°, 73°, 996, 415, 594]
Frame colors
Silver blue
Black
Burgundy
[Photographs: the complete red bicycle; a close-up of the front hub with quick release; a close-up of the front brake.]
[Handwritten in ink beside the handlebar: 229. Annotation, not print.]

miyata
Model 310M
[Photograph of the silver blue mixte (step-through) frame bicycle. No text beside it.]

[Page 6]
miyata
Model 210

This is a deluxe version of model 110. Both models use #1024 hi-tension steel tubing for frame, especially selected by Miyata to provide lightweight along with superior strength.
Additional features found on the Model 210 include alloy hubs, quick release front wheel for easy removal during transportation, and power stem mounted shifters. Miyata has added a specially designed bracket on the rear dropout which allows the rear derailleur to be mounted directly to the frame. This provides more precise shifting because the focal point for the mount never changes position. This specially designed bracket also provide for fewer derailleur adjustments.

Frame colors
Silver blue
Brown

Frame Sizes : men’s 23″
[Frame diagram: 565, 72°, 72°, 1020, 430, 598]
[Photographs: the complete bicycle in brown; a close-up of the rear dropout bracket and derailleur.]

miyata
Model 110

A budget priced sporting bicycle designed to provide years of service with a minimum of upkeep. The Miyata 110 is an ideal bike for the casual rider who desires a comfortable ride. The Miyata frame tubing and construction allows the very minimum of road shock to be transferred to the rider.
All components, including; Suntour derailleurs, Dia compe alloy brakes, and S.R. crankset, are designed to work together for the greatest cycling enjoyment.

Frame Sizes : men’s 23″
[Frame diagram: 565, 72°, 72°, 1036, 435, 609]
Frame colors
Silver blue
Red
[Photographs: the complete silver blue bicycle (110); the red loop-frame bicycle (110L). The colors block stands beside the 110 diagram and above the 110L heading.]

miyata
Model 110L
[Photograph of the red loop-frame bicycle with fenders. No text beside it.]

[Page 7]
FRAME-SETS

Model FP

Winning races is the only purpose of this fantastic frame. Already proving itself in European professional road racing.
The design is developed to meet the demands of the IJSBOERKE-KOGA-MIYATA-WARNCKE team, one of three strongest professional racing team in Europe.
The frame is the best, incorporating the most carefully selected Tange Champion chrome molybdenum steel tubing. It is Precisely assembled using Miyata professional cut-out lugs lovingly hand brazed by highly experienced craftmen using special low temperature brazing technique.
The Model FP is a true racing frame of the highest international standards.

Frame color:blue
[Frame diagram with the circled numbers 1 to 6 marking the measurements.]
Frame size | ① | ② | ③ | ④ | ⑤ | ⑥
500m/m | 71° | 74° | 520 | 413 | 586 | 990
540m/m | 72° | 74° | 535 | 413 | 588 | 991
580m/m | 73° | 74° | 550 | 413 | 590 | 992
630m/m | 73° | 74° | 575 | 413 | 610 | 1013
[Photographs: the blue frame and fork; two close-ups, of the head lug with a gear-wheel badge and of the fork crown with a pierced M.]

Model 1000

The frame is constructed of lightweight highly durable chromoly tubing and Tange champion long point lugs with diamond pattern decorative hole, completely hand brazed.
Both to prevent loosening from vibration and make fine appearance, small fittings such as cable stops, water bottle basement and cable guides etc, are all brazed on to the frame. One more point you should be aware of is a small device brazed on the right chainstay. Its purpose is to eliminate excessive chain whip when shifting.

Frame size | ① | ② | ③ | ④ | ⑤ | ⑥
19½” | 72° | 73° | 540 | 430 | 592 | 1017
21″ | 73° | 73° | 568 | 430 | 603.5 | 1026
23″ | 73° | 73° | 568 | 430 | 603.5 | 1026
25″ | 73° | 73° | 568 | 430 | 603.5 | 1026
[Photographs: the blue frame and fork; two close-ups of lug and seat-cluster detail.]

Model 912

This frame is designed from the ideal features of racing frame skelton. Constructed of Double butted chrome molybdenum tubing with Miyata’s original long point lugs and hand brazed. The forged and machined rear fork ends are equipped with adjusting screws. Seat stays are with cocaved spoon type top. All cable guides, bottle basement are brazed on to the frame.

Prame size | ① | ② | ③ | ④ | ⑤ | ⑥
19½” | 72° | 74° | 520 | 415 | 580 | 989
21″ | 72° | 74° | 535 | 415 | 585 | 992
23″ | 73° | 74° | 550 | 415 | 596 | 1003
25″ | 73° | 74° | 580 | 415 | 620 | 1025
[Photographs: the orange frame and fork; two close-ups of the bottom bracket shell and a brazed-on fitting.]
[A shared frame diagram with circled numbers 1 to 6 sits between the 1000 and 912 tables.]
[A thin blue ink line crosses the bottom bracket photograph, and a slash is drawn through the “9” of the heading “Model 912”. Annotations, not print.]

[Page 8]
Miyata…… Japan’s most
Experienced ma[illegible]ufacturer of top quality Bicycles

Miyata’s history is the history of the development of bicycles in Japan
Miyata Industry Co., Ltd. the oldest in its field in Japan, was established in 1890 and has been manufacturing bicycles for over 90 years. Miyata’s Chigasaki Plant is the largest bicycle factory in the Orient and produces 60,000 bicycles a month, featuring the latest facilities and conveyor assembly-line systems. Miyata’s long experience and the most up-to-date techniques assure you the finest bicycles at reasonable prices.
We wish to cordially invite you to inspect the Chigasaki plant on your next trip to Japan. We are confident that our bicycles will more than satisfy your customers.

Miyata’s Chronology
[Zigzag strip of year tabs: 1890, 1906, 1908, 1922, 1946, 1950, 1952, 1961, 1964, 1979, 1980. Captions, in order, with the year tab each hangs from:]
1890: Developed Japan’s first bicycle and started production.
1906: Annual production reached 7,000 units.
1908: Export started.
1922: Annual production increased to 50,000 units.
1946: Developed Japan’s first flash butt welding bicycle frames.
1950: Completed Japan’s first electrostatic painting systems and infrared ray dryer.
1952: Began production of Japan’s first powder fire extinguishers.
1961: Awarded First Prize by the Director of Industrial Science and Technology Agency
1964: Constructed new advanced CHIGASAKI plant. Started production of Japan’s first stainless bicycles.
1979: Commemoration of the 90th anniversary.
1980: [no caption]

Superb Craftsmanship for Superb Bicycles
[Three photographs of factory work: frame alignment gauging, brazing, and a painting or finishing line.]
Miyata s lightweight frames handmade by expert craftsmen combine strength and high performance.
Every component is man factured under strict quality control and inspection.

MIYATA BICYCLE LIMITED WARRANTY
1) Warrantee: This warranty warrants only to the original retail purchaser of the bicycle and is not transferable.
2) Miyata bicycle frames are warranted to be free from defects in materials and workmanship under normal use of the bicycle for lifetime of the bicycle.
3) Defective parts: All original parts, except tires, tubes & cables are warranted for one year from the date of purchase. During the warranty period, all original parts as determined by Toyoda found to be defective in workmanship or material will be repaired or replaced free of charge except for shipping and dealer labor charge.
4) How to claim warranty: All claims under this warranty must be made through an authorized MIYATA dealer during the relevant warranty period. To obtain warranty service, the owner must return the defective bicycle to an authorized MIYATA dealer for inspection with purchase receipt or other eviaence showing the date of purchase.
5) If the original dealer is no longer available or is inconveniently located, the name of an authorized dealer nearest to you can be obtained from Toyoda whose address is stated below.
6) Warranty exclusions: This warranty does not cover failure due to accident, abuse, neglect, normal wear, improper assembly, improper fit, maintenance by any other than an authorized MIYATA dealer, or use of unauthorized replacement parts. This warranty does not cover any personal injuries, damage or failure of the bicycle if used in any competitive event, including bicycle racing, motocross, stunt, or similar activities or when in training for same. Motors or other accessories inconsistent with the use intended by Miyata will negate this warranty.
7) This warranty is expressly in lieu of any other express warranty and any implied warranty including any warranty of merchantability or fitness is limited in duration to the duration of this express warranty. (Some states do not allow limitation on how long implied warranty lasts, so the above limitation may not apply to you.).
8) We shall not be responsible for consequential or special damages nor for transportation charges or for dealer labor charge except as set forth above.
9) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

(Miyata gear-wheel logo and logotype)
Manufactured by: MIYATA INDUSTRY CO., LTD.
Distributed by: TOYODA AMERICA, INC. New York, Chicago, Los Angeles
Authorized Dealer
Printed in Japan JAN 1980

[Page 9]
’80 Model Specificaton
* Colors shown are samples only-actual colors may be slightly different.
* Specifications subject to change without notice.
[Handwritten in blue ink, not print: the numbers 434, 398 (circled), 304, 269 and 229 above the headers of Models 1000, 912, 710, 610 and 310, probably dealer prices; and the word THRESHOLD in capitals above the notes at top right. Long wavy blue ink lines run down through the table and a few cells carry pen marks. Fraction glyphs in this scan are stacked and mostly broken; where a fraction cannot be read it is marked with the unreadable tag. The “½” in “19½” is read from a stacked 1 over 2 and is clear.]

[Table: eight model columns in this order: 1000, 912, 710, 610, 310, 210, 110, 110L (headed “MODEL 1000″ and so on). Models 1200, 800, 600, 400 and 200 of the earlier table are not present. Rows below, one line per model. A slash separates the printed lines of a cell.]

FRAME SIZE
1000: 19½” 21″, 23″, 25″
912: 19½”, 21″, 23″, 25″
710: 19½”, 21″, 23″, 25″
610: 19½”, 21″, 23″, 25″, 27″
310: 19½”, 21″, 23″, 25″ and / 19½” Mixte
210: 19½”, 21″, 23″, 25″
110: 19½”, 21″, 23″, 25″
110L: 19½” (Loop type)

FRAME MATERIAL
1000: TANGE Champion plain / Chromoly main tubing / MIYATA Professional lugs, with / SUN TOUR GS ends.
912: TANGE Champion Double butted / chromoly tubing. / Long point fully lugged with / SUN TOUR GS ends.
710: TANGE Champion Double butted / Chromoly tubing, / Fully lugged with SUN TOUR / GS ends.
610: MIYATA Chromoly tubing, / Fully lugged
310: MIYATA t,ii-tension steel tubing, / Lugged.
210: MIYATA Hi-tension steel tubing. / Lugged.
110: MIYATA Hi-tension steel tubing. / Lugged.
110L: MIYATA Hi-tension steel / tubing. / Lugged.

FRONT FORK
1000: MIYATA Hi-tension steel / tubing with special crown & / forged ends.
912: IYATA HI-tension steel / IUbing with special crown & / forged ehds.
710: MIYATA Hi-tension steel / tubing with special crown & / forged ends.
610: MIY4TA Hi-tension steel tubing / with (special crown.
310: MIYATA Hi-tension steel tubing / with forged ends.
210: MIYATA HI-tension steel / tubing.
110: MIYATA Hi-tension steel / tubing.
110L: MIYATA Hi-tension steel / tubing.

HEAD SET
1000: TANGE New t’ALCON
912: TANGE New Levin
710: TANGE MA-60
610: TANdE MA-60
310: TANGE MA-60
210: TANGE MA-60
110: TANGE MA-60
110L: TANGE MA-60

HANDLE BAR
1000: SAKAE ANO, / Alloy Randonneur. [the last letters are faint]
912: SAKAE CTD. Alloy.
710: SAKAE CTD. Alloy.
610: SAKAE AND, Alloy.
310: SAKAE CTD, Alloy
210: STEEL C.P. KD-4L
110: STEEL CP KD-4L
110L: STEEL CP KE-36

STEM
1000: SAKAE Apex-[illegible]H, forged Alloy.
912: SAKAE RY-KM Forged Alloy.
710: SAKAE SR-AH Alloy.
610: SAKAE SR-AH Alloy.
310: SAKAE SR-AH Alloy.
210: S-WIN-AH Alloy.
110: S-WIN-AH Alloy
110L: S-WIN60-AH Alloy

BRAKES
1000: DIA COM PE [illegible]60 Center pull, / Cantilever type, [illegible]ith hooded / levers w/0.R.
912: SHIMANO 600EX Side pull / with hooded levers w/rubber / pad.
710: DIA COMPE [illegible]500G Side pull / with hooded levers / w/rubber pad.
610: DIA COMPE 610 Center pull / with hooded levers w/0.R. & / safety levers.
310: DIA COMPE [illegible]500 SiJe pull / with hooded levers / Front w/0.R.
210: DIA COMPE [illegible]610 Center pull / with hooded levers w/safety / levers, Front w/0.R.
110: DIA COMPE [illegible]730 Side pull / with hooded levers / w/safety levers.
110L: DIA COMPE U-730 Side pull / with touring levers.

DERAILLEURS
1000: SUN TOUR / Front-Cyclone’ / Aear-CyclOne GT / Shifter-PDL-S
912: SHIMANO / Front-600EX / Rear-600EX, / Shifter-600EX
710: SUN TOUR / Front-vx: / Rear-VGT, / Shitter-PDL-M
610: SUN TOUR / Front-VX, / Rear-VGT, / Shifter-PUB-10
310: SUN TOUR / Front-VX, / Aear-VXS, / Shifter-PDL-M
210: SUN TOUR / Front-Seven, / Rear-Seven, / Shifter-PUB-10
110: SUN TOUR / Front-Seven, / Rear-Seven, / Shifter-UB-10
110L: SUN TOUR / Front-Seven, / Rear-Seven, / Shifter- UB-10

CLUSTER
1000: SUN TOUR Pro-COMPE / 14-28 teeth, Gold.
912: SHIMANO 6-Speed for / 600EX Freehub 13-28 teeth
710: SUN TOUR Pro-Compe 14-32 / teeth, Gold.
610: SUN TOUR Pro-Compe 14-32 / teeth, Gold.
310: SUN TOUR Pro-Compe / 14-28 teeth, Gold.
210: SUN TOUR Perfect / 14-28 leettf
110: SUN TOUR Perfect / 14-28 teeth.
110L: SUN TOUR Perfect / 14-28 teeth.

CHAIN
1000: HKK ½”x3/32″ / Gold special chain
912: SHI ANO [illegible]”x?, / eooyG Gold/Black ,
710: SHIMANO [illegible]”x [illegible]” 600UG / Gold/Black
610: SHIMANO ½”x3/32″ 600UG / Gold/Black.
310: KEC [illegible]”x [illegible]”
210: KEG [illegible]” x [illegible],
110: KEC [illegible] “x [illegible]2”
110L: KEG [illegible] “x [illegible],”

CRANK SET
1000: SAKAE Super APEX-5TG, / 52×47×34 teeth, with 170mm / forged alloy cranks.
912: SHIMANO 600EXLD / 52×4.2 teeth, 170mm / cranks alloy.
710: SAKAE S[illegible]lstet SORG-AH / 52X42 teeth, / 16[illegible]mm cranks(for 19½”, 21″) / 170mm cranks(lor 23″, 25″)
610: SAKAE Silster 5DX-AH / 52×40 teeth, / 165mm cranks (for19½”, 21″) / 170mm cranks (for 23″, 25″, 27″)
310: SAKAE Sitsler SCRG-AH / 52 x x 42 teeth, / 165mm cranks(for 19[illegible]”,21″) / 170mm cranks (for 23 25″)
210: SAKAE Silsler SOX-AH / 52 x 40teeth, / 165mm cranks (for 19[illegible]”, 21″) / 170mm cranks (for 23″. 25″)
110: SAKAE Silster SDXC / 52 x 40 teeth, / 165mm cranks (for 19[illegible]”. 21″) / 170mm cranks (for 23″, 25″)
110L: SAKAE Silster SDXC / 52×40 teeth, / 165mm cranks.

PEDALS
1000: MKS Ouill-2K Alloy
912: ; KT-TP Altoy
710: MKS QR-K1 Alloy
610: SAKAE SP-300
310: KKT AT-EI
210: KKT RT-Et
110: KKT AT-EI
110L: KKT AT-EI

TIRES
1000: MYT 27″x1[illegible]” / Skin, side wall, 90 lbs. / Hi-pressure.
912: MYT 700 x 25C Skin side wall, / 100 lbs. Hi-pressure with / French pattern valves.
710: MYT 27″ X 1[illegible] G.S.W, / OOlbs. Hi-pressure
610: MYT 27″x1[illegible] G.S.W. 90 lbs. / Hi-pressure.
310: MYT 27″X1[illegible]” G.S.W. 90 lbs. / Hi-pressure
210: MYT 27″X 1[illegible] ” G.S.W. / 75 lbs.
110: MYT 27″X1[illegible]” G.S.W. / 75 lbs.
110L: MYT 27″ x [illegible] ” G.S.W. / 75 lbs.

RIMS
1000: 27 x 1[illegible]” Alloy Front-H / Rear-40H
912: 700C Model 20A Alloy.
710: 27″x1[illegible]” Alloy narrow type
610: 27″x1[illegible] · Alloy
310: 27″x1[illegible]” Alloy.
210: 27″x1[illegible] · steel
110: 27″x1[illegible]” steel
110L: 27″x1[illegible] · steel

SPOKES
1000: [illegible]14, u.c.p. Front-36 pcs / Rear-40 pcs
912: [illegible]14, u.c.p. w/brass nipples.
710: [illegible]14, u.c.p w/brass nipples
610: [illegible]14, u.c.p. w/brass nt,ples.
310: #14, u.c.p. brass nipples.
210: [illegible]14, u.c.p.
110: [illegible]14, u.c.p.
110L: #14, u.c.p.

HUBS
1000: SUNSHINE GYAO-MASTEA / low flange alloy with front & rear / Quick release: / Front-36H, Aear-4CIH
912: SHIMANO 600EX, Freehub low / flange with front & rear / quick release.
710: SUNSHINE Alloy low falange / with front & rear Quick / release.
610: SUNSHINE Alloy front / HI-flange & rear low llange / with front & rear QU[illegible] / release.
310: SUNSHINE Alloy 14w flange / front with Quick release & rear / with blind nuts.
210: SUNSHINE Alloy front Hi-flange / with Quick release & rear / low flange with bllnd nuts.
110: Steel c.p. Front semi-large / flange & rear low flange with / nuts.
110L: Steel C.P. Front semi-large / flange & rear low flange with / nuts.

SADDLE
1000: AAIAKE JaQuar-11 / 77-IS padded
912: AAIAKE JaQuar-1 J / 77CDX padded
710: ARIAKE 77-17-IS padded
610: ARIAKE 77-17-IS padded.
310: ARIAKE 77-17 Quilte, vinyl & / padded.
210: ARIAKE 77-17 Quilled vinyl & / padded.
110: ARIAKE 77-17 quilted vinyl & / padded’.
110L: ARIAKE 77-17 quitted vinyl & / padded.

SEAT PILLAR
1000: SAKAE GT-PS, Alloy
912: SAKAE CT-PS, Alloy
710: SAKAE CT-PS, Alloy black / anodized.
610: Alloy anodized’ 9″
310: Altoy anodized 9″
210: MIYATA Chrome plated 9″
110: MIYATA Chrome plated 9′
110L: MIYATA Chrome plated 9′

EXTRA
1000: Toe clips and straps, Orinkbottle, / Alloy carriers, Alloy spoke / protector, Reflectors.
912: Toe clips and straps, Drink bottle, / Plastic spoke protector, / Reflectorss.
710: Alloy ·spoke protector, / Reflectors.
610: Alloy spoke protector, / Reflectors.
310: Alloy spoke protector, / Reflectors.
210: Alloy spoke protector, / Reflectors.
110: Alloy spoke protector, / Reflectors.
110L: Alloy spoke protector, / AeflectOfS, / Mudguards,

COLOR
1000: Royal blue, / Burgundy
912: Black, / Orange
710: Ming Brown, / Camel Beige
610: Silver, Black, / Burgundy
310: Silver blue, Black, / Burgundy
210: Sliver blue, / Brown
110: Silv8f blue, / Red
110L: Silver blue, / Red

WEIGHT APPROXIMATELY
1000: 27 lbs. (21″)
912: 23 lbs. (19½”)
710: 24 lbs. (19-[illegible])
610: 25 lbs. (19½”)
310: 26 lbs. (19½”)
210: 29 lbs. (19½”)
110: 30 lbs. (19½)
110L: 32 lbs. (19½”)

Manufactured by MIYATA INDUSTRY CO., LTD. Distributed by TOYODA AMERICA, INC. New York, Chicago, Los Angeles.

Ebykr presents this material for research and education. If you hold rights to it or notice an ownership issue, please contact us and we will respond promptly.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.