Welland Vale Bicycles Catalogue 1898 — the Perfect, Garden City and Dominion Models, Chainless, Racing and Tandem Bicycles, the Brake and the Price List of Parts

Catalog 1898 42 pages Canada

Source: Toronto Public Library Digital Archive (object 376857; the record page states Usage Rights: Public Domain), page images from the library's PDF; enlarged for Ebykr.

About this document

MarqueWelland Vale
TypeCatalog
Year1898
PublisherWelland Vale Mfg. Co., Limited, St. Catharines (Ontario)
CountryCanada
LanguageEnglish
Pages42
SourceToronto Public Library Digital Archive (object 376857; the record page states Usage Rights: Public Domain), page images from the library's PDF; enlarged for Ebykr.
CreditToronto Public Library Digital Archive (Public Domain); Ebykr archive
IdentifierPermalink https://digitalarchive.tpl.ca/objects/376857
TranscriptionTranscribed by eye
Cite this document

Reference

Welland Vale Mfg. Co., Limited, St. Catharines (Ontario). Welland Vale Bicycles Catalogue 1898: the Perfect, Garden City and Dominion Models, Chainless, Racing and Tandem Bicycles, the Brake and the Price List of Parts. 1898. Ebykr, https://ebykr.com/library/welland-vale-bicycles-catalogue-1898/.

Wikipedia

{{cite book |title=Welland Vale Bicycles Catalogue 1898: the Perfect, Garden City and Dominion Models, Chainless, Racing and Tandem Bicycles, the Brake and the Price List of Parts |publisher=Welland Vale Mfg. Co., Limited, St. Catharines (Ontario) |date=1898 |url=https://ebykr.com/library/welland-vale-bicycles-catalogue-1898/ |via=Ebykr |access-date=}}

Transcription

Welland Vale Bicycles. 1898 Welland Vale M'f'g. Co. Limited, St. Catharines, Canada. The Welland Vale M'f'g Co Limited Makers of Perfect, Garden City and Dominion Bicycles. Office and Works: St. Catharines, Ont., Canada. Agencies all over the World. Printed by Miln-Bingham Printing Co., Toronto. Bicycle Guarantee. WE agree with the purchaser of each Welland Vale …

Read the full transcription (42 pages)

Forty-two pages of the Welland Vale Bicycles catalogue 1898: the guarantee, the Perfect, Garden City and Dominion models for gentlemen and ladies, the chainless, racing and tandem models, the cranks, hubs, brake and saddles, and the price list of parts for repairs.

— Page 1 (front cover) —
Welland Vale
Bicycles.
1898
Welland Vale M’f’g. Co. Limited,
St. Catharines, Canada.

[The front cover of the Welland Vale Bicycles catalog for 1898 shows a woman in a yellow gown holding a laurel wreath beside a shield of arms, with a gentleman’s bicycle at the right. A dealer’s red rubber stamp of three lines lies at the lower right over a silver scroll ornament, and the paper is stained and foxed along the lower edge.]

— Page 2 —

[A blank page with no printing, marks or paper texture; the image is pure white, which suggests a scanned blank or an added blank leaf.]

— Page 3 —
The Welland Vale M’f’g Co Limited
Makers of
Perfect, Garden City and Dominion Bicycles.
Office and Works:
St. Catharines, Ont., Canada.
Agencies all over the World.
Printed by
Miln-Bingham Printing Co., Toronto.

[The title page of the Welland Vale catalog, with Perfect, Garden City and Dominion Bicycles named as the products, shows an engraved bird’s-eye view of the company’s factory buildings and waterfront in a brown ornamental frame with an owl, wreaths and a scroll banner. The engraver’s mark lies at the lower left of the picture.]

— Page 4 —
Bicycle Guarantee.

WE agree with the purchaser of each Welland Vale Bicycle to make good by repair or replacement when delivered to our factory, transportation prepaid, any imperfection or defect in material or manufacture of such bicycle, provided that the factory serial number shall be on such bicycle at the time the claim is made, and that all imperfect parts shall be referred to us before any claim for repair or replacement shall be allowed. This guarantee does not cover the cost of repairing said bicycle when damaged by accident, misuse or neglect.

This guarantee does not include any Tire with which our bicycles may be equipped. Claims for defective or damaged Tires must be made direct with the makers.

No Wood Guards or Lacing guaranteed.

This Guarantee continues for sixty days from date of sale by the agent.

One-Piece Cranks.

WE Guarantee One-Piece Cranks used on all Welland Vale Bicycles unconditionally, and will replace without charge any such cranks broken or defective within one year from date of purchase of bicycle.

[The Bicycle Guarantee and One-Piece Cranks guarantee of the Welland Vale bicycles, in a border of interlaced ornament, with an engraving of a one-piece crank and chain wheel beside the second paragraph. The words Welland Vale Bicycle are set in blackletter and the paragraphs open with blackletter capitals.]

— Page 5 —
TO THE PUBLIC.

ALTHOUGH it is a bold statement, we say it without fear of contradiction, that our Bicycles for 1897 have proved themselves superior to any on the market.

They have cost both their riders and ourselves less for repairs than any other make. We will continue to manufacture the “Perfect,” “Garden City” and “Dominion” lines of Chain Bicycles, and in addition we will make the Perfect Chainless machine, which will be a favorite with a large class of riders for 1898. In putting our Chainless wheel on the market, the rider does not take any chances incident to experimental work as this machine is no longer an experiment with us. It has had every possible test that actual service can give, having had it in use during the greater part of the riding season of 1897. It has exceeded our expectations and in all points is equal, and in some respects superior, to any Chainless Bicycle manufactured. We will equip the “Perfect” for 1898 with our special Handle-Bar fastening which dispenses with the unsightly and clumsy clamp bolt and nut (see description). The “Perfect” will be fitted with the “New Departure” friction brake on both Ladies’ and Gentlemen’s models when ordered, which is the neatest and most effective brake yet invented; always ready for use and not observable.

Our one-piece cranks, self-oiling hollow axles, self-locking and adjustable handle-bars, oval rear forks, ball-retaining and dust-proof bearings, will still continue to be features of our “Perfect” bicycle.

Our “Garden City” will be equipped with one-piece cranks; hollow self-oiling axles, and oval rear forks.

The “Dominion” will also have the one-piece cranks.

We invite careful attention to specifications for full particulars of our different machines.

[A page headed To the Public, with a text about the Perfect, Garden City and Dominion bicycles and the Perfect Chainless machine, set beside an engraving of a crowned shield of arms in maple leaves and roses. The engraver’s name and city appear in small script at the right of the shield.]

— Page 6 —
“Perfect” Model.
PRICE, $85.00.

[The “Perfect” Model gentleman’s bicycle in a side-view engraving with its price line below. A thin vertical rule, a tiny stray mark and a tick lie among the price figures, as if from a worn or patched plate.]

— Page 7 —
Specification of
Gentleman’s “Perfect” Roadster.

Frame …. Twenty-two, 24 or 26 inches high, with invisible Flush Joints all around; 1⅜-in. Head; 1⅛-in. Upper Tube; 1¼-in. Bottom Tube; 1¼ in. tapered to 1⅛-in. Seat-Post Tube; ¾-in. Rear Braces; ⅞-in. Oval Rear Forks; Short Head with Dropped Bracket.

Crank Shaft Patent One-Piece, Self-Oiling, 6½-in. Throw; 5-in. Tread.

Forks …. Made of Weldless Tubing, nicely tapered; Double Crown, nickeled.

Saddle Post Special Adjustable Saddle Post, held by our “Perfect” Saddle-Post Clamp (see cut).

Wheels …. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings with Ball-Retaining Washers; Hollow Oil-containing Axles; Wood Rims; Wheel Base, 43 inches.

Weight …. Twenty-four to 27 pounds—according to size of frame and fittings used.

Pedals …. Best Combination Rubber and Rat-Trap; our own make.

Handle Bar. Adjustable Steel No. 7 (see cut); held by our Patent Handle-Bar Binder (see cut).

Chain and Gear …. Baldwin Adjustable Chain, 3/16-in.; front and rear sprockets detachable, nine-tooth rear sprocket, making gear 62, 65, 68½, 71½, 74½, 77, 81 or 84.

Saddle …. Christy.

Tires …. Dunlop, Hartford or Vim.

Finish …. Black, Maroon or Green Enamel; plain or decorated as desired.

This machine is, as the name indicates, a perfect bicycle for road riding, strong, speedy, and serviceable. Every conceivable requirement, combined with the utmost mechanical skill, is embodied in our “Perfect” Bicycle, and it is a marvel of durability and beauty, and the best that can be produced at any cost.

[The Specification of Gentleman’s “Perfect” Roadster, listed by frame, crank shaft, forks, saddle post, wheels, weight, pedals, handle bar, chain and gear, saddle, tires and finish, followed by a paragraph of description. A crown with roses, thistles and shamrocks and three maple leaves stands at the top, with a small engraver’s mark at the lower left of the crown.]

— Page 8 —
“Perfect” Model.
PRICE, $85.00.

[The “Perfect” Model ladies’ bicycle in a side-view engraving, with a dress guard over the rear wheel and a drop frame, and its price line below.]

— Page 9 —
Specification of
Lady’s “Perfect” Roadster.

Frame …. Drop Frame, 19, 21, or 23 inches high, with invisible Flush Joints all around; 1⅜-in. Head; 1⅛-in. Upper Tube; 1¼-in. Bottom Tube; 1¼-in. tapered to 1⅛-in. Seat-Post Tube; ¾-in. Rear Braces; ⅞-in. Oval Rear Forks; Short Head with Dropped Bracket.

Crank Shaft Patent One-Piece, Self-Oiling, 6-in. or 6½-in. Throw, as desired; 5-in. Tread.

Forks …. Made of Weldless Tubing, nicely tapered; Double Crown, nickeled.

Saddle Post Special Adjustable Saddle-Post, held by our “Perfect” Saddle-Post Clamp (see cut).

Wheels …. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings with Ball-Retaining Washers; Hollow Oil-containing Axles; Wood Rims; Wheel Base, 43 inches.

Guards …. Wood; Chain Guard, one continuous piece with guard to protect dress from sprockets; Wheel Guard with eyelet lace holes.

Weight …. Twenty-four to 27 pounds, according to size of frame and fittings used.

Pedals …. Best Combination Rubber; our own make.

Handle Bar Any Style shown per cuts in Catalogue; held by our Patent Handle-Bar Binder (see cut).

Chain and Gear …. Baldwin Adjustable Chain, 3/16-in.; front and rear sprockets detachable, eight-tooth rear sprocket, making gear 63, 66½, or 70.

Saddle …. Christy.

Tires …. Dunlop, Hartford or Vim.

Finish …. Black, Maroon or Green Enamel; plain or decorated, as desired.

Everything to meet the convenience and requirements of lady riders has been studied in designing this machine. Beauty and grace are evident in every outline. The comfortable position of the rider and ease in mounting are two of the principal features of it; making the same a perfect lady’s mount.

[The Specification of Lady’s “Perfect” Roadster, listed by frame, crank shaft, forks, saddle post, wheels, guards, weight, pedals, handle bar, chain and gear, saddle, tires and finish, followed by a paragraph of description. A crowned royal shield with maple leaves, a rose and shamrocks stands at the top, with a small engraver’s mark in the scroll at its lower left.]

— Page 10 —
“Garden City” Model.
PRICE, $70.00.

[The “Garden City” Model gentleman’s bicycle in a side-view engraving, with a separate small drawing of a fork crown at the upper right and its price line below.]

— Page 11 —
Specification of
Gentleman’s “Garden City” Roadster.

Frame …. Twenty-two, 24, or 26 inches high; 1⅜-in. Head; 1⅛-in. Upper Tube; 1¼-in. Bottom Tube; 1¼-in. tapered to 1⅛-in. Seat-Post Tube; ¾-in. Rear Stays, and ⅞-in. Oval Rear Forks; Short Head with Dropped Bracket.

Crank Shaft Patent One-Piece, Self-Oiling, 6½-in. Throw; 5-in. Tread.

Forks …. Made of Weldless Tubing, nicely tapered; Arched Crown, nickeled.

Wheels …. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings with Ball-Retaining Washers; Hollow Oil-containing Axles; Wood Rims; Wheel Base, 43 inches.

Weight …. Twenty-four to 27 pounds—according to size of frame and fittings used.

Pedals …. Best Combination Rubber or Rat-Trap; our own make.

Handle Bar. Any of our regular patterns—not adjustable.

Chain and Gear …. Chain, ¼-in. Hardened Blocks and Rivets; B pattern; front and rear sprockets detachable; nine-tooth rear sprocket, making gear 62, 65, 68½, 71½, 74½, 77, 81 or 84.

Saddle …. Laced Hygiene, Brown Pattern, Christy or Welland-Vale.

Tires …. Dunlop, Hartford or Vim.

Finish …. Black, Maroon or Green Enamel; plain or decorated as desired.

It is with our “Garden City” Bicycle that most other high grade machines must be compared, as our “Perfect” is in a class by itself. For thoroughness of construction and quality of material our “Garden City” is equal to any machine produced. While not fitted with some of the expensive attachments of our “Perfect,” it is strictly high grade in every respect, and the best value for the money on the market.

[The Specification of Gentleman’s “Garden City” Roadster, listed by frame, crank shaft, forks, wheels, weight, pedals, handle bar, chain and gear, saddle, tires and finish, followed by a paragraph comparing the Garden City with the Perfect. A large rose with maple leaves, thistles and shamrocks stands at the top, with the engraver’s name and city on a scroll below the rose.]

— Page 12 —
“Garden City” Model.

PRICE, $70.00.

[The “Garden City” Model lady’s bicycle with a drop frame, shown in an engraving beside a separate fork, with its price. There is no printed folio on the page.]

— Page 13 —
Specification of
Lady’s
“Garden City” Roadster.

Frame…… Drop Frame, 19, 21, or 23 inches high; 1⅜-in. Head; 1⅛-in. Upper Tube; 1¼-in. Bottom Tube; 1¼-in. tapered to 1⅛-in. Seat Post Tube; ¾-in. Rear Braces, and ⅞-in. Oval Rear Forks; Short Head and Dropped Brackets.

Crank Shaft Patent One-Piece Self-Oiling Cranks; 6-in or 6½-in Throw, as desired; 5-in. Tread.

Forks …….. Made of Weldless Tubing, nicely tapered; Arched Crown, nickeled.

Wheels…… Twenty-eight inch Wheels, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings with Ball-Retaining Washers; Hollow Oil-containing Axles; Wood Rims; Wheel Base, 43 inches.

Guards …… Wood Chain Guard, one continuous piece with guard to protect dress from sprockets; Wheel Guard with eyelet lace holes.

Weight….. Twenty-four to 27 pounds—according to size of frame and fittings used.

Pedals…… Best Combination Rubber; our own make.

Handle Bar. Any of our regular patterns, not adjustable.

Chain and Gear……… Chain, ¼-in. Hardened Block and Rivets; B pattern; front and rear sprockets detachable; eight-tooth rear sprocket, making gear 63, 66½, or 70.

Saddle……. Laced Hygiene, Brown pattern, or Christy.

Tires… …. Dunlop, Hartford or Vim.

Finish…. .. Black, Maroon or Green Enamel ; plain or decorated, as desired.

The same features of ease and convenience are carried out in the “Garden City” Lady’s as in our “Perfect.” Our aim has been to put a high-grade machine on the market at a popular price, and we have accomplished it by producing the “Garden City.”

[The specification of the Lady’s “Garden City” Roadster, set as a list of parts from Frame to Finish, under a heading with a Canadian coat of arms, maple leaves and roses in the upper left. A small engraver’s signature is drawn into the ornament. There is no printed folio on the page.]

— Page 14 —
“Dominion” Model.

PRICE, $60.00.

[The “Dominion” Model diamond-frame bicycle with drop handlebars in an engraving, with its price. There is no printed folio on the page.]

— Page 15 —
Specification of
Gentleman’s “Dominion” Roadster.

Frame ……. Twenty-two, 24 or 26 inches high, 1⅜-in. Head ; 1⅛-in. Upper Tube ; 1¼-in. Bottom Tube ; 1¼-in. tapered to 1⅛-in. Seat Post Tube ; ¾-in. Rear Stays ; ⅞-in. Oval Rear Forks.

Crank Shaft Patent One-Piece, 6½-in. Throw ; 5-in. Tread.

Forks. ……. Made of Weldless Tubing, nicely tapered ; Humber Pattern Crown, nickeled.

Wheels……. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear ; Dust-proof Bearings with Ball-Retaining Washers ; Wood Rims ; Wheel Base 42½ inches.

Weight. ….. Twenty-four to 27 pounds—according to size of frame and fittings used.

Pedals……. Best Combination Rubber or Rat-Trap ; our own make.

Handle Bar. Any of our Regular Patterns, not Adjustable.

Chain and Gear………. Chain, ¼-in. Hardened Blocks and Rivets, B. Pattern ; front and rear sprockets detachable; eight-tooth rear sprocket, making gear 66½, 70, 73½, 77 or 80½.

Saddle……. English, Brown Patterns or Welland Vale.

Tires………. Dunlop, Hartford or Vim.

Finish…….. Black, Maroon or Green Enamel.

This machine is for the “masses” and we challenge the world to produce anything better for the money. We equip our Dominion with the one-piece cranks and guarantee every part just as much as our higher priced machines.

[The specification of the Gentleman’s “Dominion” Roadster, set as a list of parts from Frame to Finish, under a heading with a crown, roses, shamrocks and maple leaves. A small engraver’s signature is drawn into the ornament at the left. There is no printed folio on the page.]

— Page 16 —
“Dominion” Model.

PRICE, $60.00.

[The “Dominion” Model drop-frame bicycle with a chain guard and wheel guard in an engraving, with its price. There is no printed folio on the page.]

— Page 17 —
Specification of
Lady’s “Dominion” Roadster.

Frame……. Dropped Frame, 19, 21 or 23 inches high ; 1⅜-in. Head ; 1⅛-in. Upper Tube ; 1¼-in. Bottom Tube ; 1¼-in. tapered to 1⅛-in. Seat Post Tube ; ¾-in. Rear Stays, and ⅞-in. Oval Rear Forks.

Crank Shaft Patent One-Piece Cranks ; 6½-in. Throw ; 5-in Tread.

Forks .. ….. Made of Weldless Tubing, nicely tapered ; Humber Pattern Crown, nickeled.

Wheels …. Twenty-eight inch ; 28 Spokes in front and 36 Spokes in rear ; Dust-proof Bearings with Ball-Retaining Washers ; Wood Rims ; Wheel Base, 42½ inches.

Guards …. Wood Chain Guard, one continuous piece with guard to protect dress from Sprockets.

Weight …… Twenty-four to 27 pounds—according to size of frame and fittings used.

Pedals……. Best Combination Rubber ; our own make.

Handle Bar. Any of our regular patterns—not adjustable.

Chain and Gear .. …… Chain, ¼-in. Hardened Blocks and Rivets ; B pattern ; front and rear sprockets detachable ; eight-tooth rear sprocket, making gear 63, 66½ or 70.

Saddle ….. English or Brown patterns.

Tires……… Dunlop, Hartford or Vim.

Finish ….. . Black, Maroon or Green Enamel.

Realizing the requirements of a numerous class of riders for a thoroughly reliable mount at a low price, we have endeavored to meet this demand and the “Dominion” is the result. We defy competition at the price.

[The specification of the Lady’s “Dominion” Roadster, set as a list of parts from Frame to Finish, under a heading with a Canadian coat of arms, maple leaves, roses and shamrocks. A small engraver’s signature is drawn into the ornament, and a short dark dash lies under one word of the closing paragraph. There is no printed folio on the page.]

— Page 18 —
Sectional parts of Gentleman’s Chainless.

“Perfect” Chainless Model.

PRICE, $125.00.

[The “Perfect” Chainless Model bicycle with a shaft drive in an engraving with its price, under a cut-off engraving of the rear wheel and shaft with the loose parts of the Gentleman’s Chainless laid out beside it. There is no printed folio on the page.]

— Page 19 —
Specification of
Gentleman’s Chainless Roadster.

Frame. …. Twenty-two, 24 or 26 inches high, with Flush Joints at both head connections ; 1⅜-in. Head ; 1⅛-in. Top and Bottom and Seat Post Tubes ; ¾-in. Rear Braces ; ⅞-in. Rear Forks ; Short Head with Dropped Bracket.

Crank Shaft Patent One-Piece, Self-Oiling, 6½-in. Throw ; 5-in. Tread.

Forks …….. Made of Weldless Tubing, nicely tapered ; Double Crown, nickeled.

Saddle Post Special Adjustable (see cut).

Wheels……. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear ; Dust-proof Bearings with Ball-Retaining Washers, Hollow Oil-containing Axles ; Wood Rims ; Wheel Base, 43 inches.

Weight …… Twenty-seven to 29 pounds—according to size of frame and fittings used.

Pedals……. Best Combination Rubber or Rat-Trap ; our own make.

Handle Bar. Adjustable Steel No. 7 (see cut), held by our Patent Handle-Bar Binder (see cut).

Gear………. Sixty-six or 73.

Saddle …… Christy.

Tires……… Dunlop, Hartford or Vim.

Finish …… Black, Maroon or Green Enamel ; plain or decorated.

Among the principal advantages that we claim for our Chainless Bicycle over all others are the use of One-Piece Cranks ; Hollow Oil-containing Axles ; Frame all Brazed together, making it practically one piece, and quite as rigid as our Chain Machines. There are no hinged or moveable parts in the construction of our frames, which alone is an important feature. The gears are made from the best material obtainable, carefully prepared for the purpose. They are cut by special machines, making them absolutely accurate in contact and noiseless in operation.

[The specification of the Gentleman’s Chainless Roadster, set as a list of parts from Frame to Finish, under a heading with a rose, scrollwork and maple leaves. A small engraver’s signature is drawn into the scrollwork at the left. There is no printed folio on the page.]

— Page 20 —
“Perfect” Chainless Model.

PRICE, $125.00.

[The “Perfect” Chainless Model drop-frame bicycle with a shaft drive and a wheel guard in an engraving, with its price. There is no printed folio on the page.]

— Page 21 —
Specification of
Lady’s Chainless Roadster.

Frame……. Drop Frame, 19, 21, or 23 inches high, with Flush Joints at both head connections; 1⅜-in. Head ; 1⅛-in. Top and Bottom and Seat Post Tubes; ¾-in. Rear Braces; ⅞-in. Rear Forks; Short Head with Dropped Bracket.

Crank Shaft Patent One-Piece Self-Oiling, 6-in. or 6½-in. Throw, as desired; 5-in. Tread.

Forks …….. Made of Weldless Tubing, nicely tapered; Double Crown, nickeled.

Saddle Post Special Adjustable (see cut).

Wheels……. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings with Ball-Retaining Washers ; Hollow Oil-containing Axles ; Wood Rims ; Wheel Base, 43 inches.

Weight … .. Twenty-seven to 29 lbs., according to size of frame and fittings used.

Pedals……. Best Combination Rubber; our own make.

Handle Bar. Any Style, per cuts in catalogue; held by our Patent Handle-Bar Binder (see cut).

Gear ……… Sixty-six or 73.

Saddle……. Christy.

Tires….. … Dunlop, Hartford or Vim.

Finish …. ..Black, Maroon or Green Enamel; plain or decorated, as desired

The many advantages of a Lady’s Chainless Bicycle over a Chain Machine are very apparent. There is nothing about it to “catch things,” It is much less trouble to clean and more easily kept so. The running gear is all enclosed and not subject to the weather; and as all parts are absolutely dust and mud proof it necessarily runs faster and further with less effort.

[The specification of the Lady’s Chainless Roadster, set as a list of parts from Frame to Finish, under a heading with a Canadian coat of arms, maple leaves and roses in the upper left. A small engraver’s signature is drawn into the ornament. There is no printed folio on the page.]

— Page 22 —
“Perfect” Racing Model.

PRICE, $85.00.

[The “Perfect” Racing Model diamond-frame bicycle with drop handlebars in an engraving, with its price. There is no printed folio on the page.]

— Page 23 —
Specification of Track Racer.

Frame . ….. Twenty-two inches high; 5-in. Head; Tubing, 1¼-in. Head; 1-in. Top Rail; 1⅛-in. Bottom Rail and Seat Post Tube; ¾-in. Rear Forks; ⅝-in. Rear Stays; Low Dropped Bracket.
Crank Shaft Patent One-piece; 6½-in. or 7-in. Throw; 5-in. Tread.
Forks …….. Weldless with Crown Doubly Re-inforced.
Seat Post… Ordinary L Style, pointing either forward or backward.
Wheels ….. Twenty-eight inch, with 28 Spokes in front and 36 Spokes in rear; Dust-proof Bearings; Wood Rims; Wheel Base, 43 inches.
Weight …… Eighteen and one-half pounds.
Pedals.. … Rat-Trap.
Handle Bar. Special Ram’s Style.
Chain and Gear ………. Baldwin Adjustable Chain, 3/16[?]-in.; front and rear sprockets detachable; eight or nine tooth rear sprockets, geared anything up to 94½ as desired.
Saddle……. Light Weight, made especially for racers.
Tires ……… Hartford or Vim.
Finish…….. Black, Maroon or Green as desired; plain or decorated.

Special Sizes Built to Order.

Our racing machines are built strong enough for use upon the road as well, and when equipped with light road tires, make the speediest road wheel possible. The greatest care is taken to secure a rigid frame and forks without having an unnecessary ounce of weight. That we have attained perfection is evident by the winnings both on the track and road of riders of the “Perfect.”

[Specification of the Track Racer as a list of parts and sizes, with a paragraph on racing machines below. A large floral engraving of roses, maple leaves and clover fills the upper left, signed in the scrollwork “J L JONES ENG CO Toronto”, with small leaf ornaments between the blocks.]

— Page 24 —
“Perfect” Tandems.
PRICE, $125.00.

[The “Perfect” Tandems, an engraving of a two-seat tandem bicycle with both wheels, two saddles and two sets of handlebars, printed sideways on the page with its caption and price beside it.]

— Page 25 —
“Perfect” Tandems.

Besides the style shown in opposite cut, we make a Tandem for two gentlemen, which is the same in design excepting that the Frame is a Diamond instead of the Drop Curved Frame as shown.

Frame……. One and one-quarter inch, and 1⅛-in. Tubing, all Doubly Re-inforced and made specially strong and with Low Dropped Brackets.
Crank Shaft Patent One-Piece 6½-in. Throw; Tread 5⅜-in., rear and 5-in. front.
Forks……… Made of Weldless Tubing, Doubly Re-inforced, with Double Crown; nickeled.
Saddle Post Ordinary T styles.
Wheels……. Twenty-eight inch Wheels, front and rear; Dust-proof Bearings with Ball-Retaining Washers all around; Hollow Oil-containing Axles; Extra Heavy Spokes, and Wood Rims made specially for our Tandems; Wheel Base, 67 inches.
Pedals……. Best Combination Rubber and Rat-Trap. Our own make.
Handle Bar Any style per cut in catalogue.
Chain and Gear………. Baldwin Adjustable ¼-in. Chain; Geared 84, 91 or 105.
Saddles ….. Christy.
Tires . ……. Dunlop, Hartford or Vim.
Finish ……. Black, Maroon or Green Enamel; plain or decorated.
Weight …… About 45 pounds.

Racing Tandems built to order.

Our aim in building Road Tandems is to combine strength, ease and comfort, and our machines are peerless in every detail. All such points as ease of position, strength of Fork Crown, rigidity of frame, have been made perfect in this machine. It is on the simplest lines possible and will meet the desires of the most fastidious.

[Specification of the “Perfect” Tandems as a list of parts and sizes, with notes on a diamond frame tandem and on road tandems. A heading engraving shows a crown among roses and clover beside four maple leaves, signed in small letters at lower left “J L JONES ENG CO Toronto”.]

— Page 26 —
Hanger and Cranks.
Cranks and Axle in One Piece.
OIL RECESS
Hubs.
New Design of Barrel Hub and Hollow Axle.

[Cutaway engravings of the Hanger and Cranks, with cranks and axle in one piece and an oil recess marked in the axle, and of the Hubs, a barrel hub with hollow axle shown in section. A small engraver’s line, “J L JONES ENG CO TORONTO”, sits under the hub drawing.]

— Page 27 —
Description of Cranks.

THE cut on opposite page shows our one-piece cranks and axle. Bicycle riders will at once recognize the importance and benefit of this improvement, which does away with cotter pins and nuts, and effectually remedies the evils and annoyances of loose cranks. The cranks and axle are forged in one piece, the hanger being just large enough to allow the crank to pass through. The cases are screwed into the hanger and are ball-retaining. The cones are screwed on the axle, and the bearings are dust-proof. They are also self-oiling, there being an oil chamber at each end of the axle fitted with screw stopper and having openings at the inner end fitted with wicking leading directly to the bearings. The sprocket wheel is attached to the spider on the axle by bolts and nuts, and is also attached to the crank in such a manner that all cross strain is removed from the bolts and nuts, so that there is little tendency to their working loose, thus avoiding the annoyance of lost nuts and bolts and loose sprocket wheel. A loose sproket wheel is always liable to break; a very serious and dangerous mishap.

The self-oiling axles are used only on our “Perfect” and “Garden City” bicycles. The same axles, without the self-oiling chambers, are used on our “Dominion” wheels.

Description of Hub.

THIS Hub is our own design and has many new and advantageous features. The Cases are Ball Retaining and the Cones can be easily adjusted with the thumb and finger. Felt washers that cannot get out of place, render the bearings dust-proof. The axles are hollow to hold a supply of oil for the bearings, dispensing with the use of oil cups in the hubs. A small wick leads the oil directly on to the bearings at each end. By removing the screw in end of axle the chamber can be refilled with oil. One filling will last a season with ordinary riding.

The hollow axles are used on our “Perfect” and “Garden City” Bicycles only. The same hub with solid axles is used on our “Dominion.”

[Descriptions of the cranks and of the hub, with the models “Perfect”, “Garden City” and “Dominion” named. A coat of arms with a crown, maple leaves, roses and clover fills the upper left, and the first line of each text block opens with a large decorated capital T.]

— Page 28 —
The Handle-Bar Binder.
Used on Our “Perfect” Bicycles only.

THE Handle-Bar Binder or Clamping Device used on our Chain and Chainless “Perfect” Models is entirely new to the trade. It gives the head of the bicycle a very neat appearance, being completely enclosed within the head as shown by accompanying illustration. There are no lugs or clamping bolts or parts of any kind to get out of order or break. It is constructed as follows:—A piece of tube about ¾-in. long is first brazed inside the upper end of the fork-stem. The stem and tube are then reamed on a taper, making the former bell mouthed at the top. The fork-stem is then threaded to receive the top head case, and is also slotted on opposite sides. The binder is made from a piece of 22 gauge tubing large enough to receive the handle-bar stem and has a ring about ¾-in. long, brazed on the outside at upper end and tapered to fit the bell mouthed end of the fork-stem, and is slotted at the upper end with four slots. A washer is inserted in the lower end of this binder, from the centre of which projects a piece of tubing; these parts are then brazed together, making them practically one piece. The binder is placed inside the fork-stem and the piece of tubing projects through the crown to receive a nut. As the nut on the under side of the fork-crown is tightened, it draws the tapered portions of the fork-stem and binder together (both pieces being slotted), causing the fork-stem to expand and bind the head case. The binder contracts and binds the handle-bar, and when drawn tight holds the bar perfectly rigid.

PATENT APPLIED FOR

[The Handle-Bar Binder for the “Perfect” bicycles, a cutaway engraving of a handlebar, fork stem and fork crown, marked “Patent applied for”, with the text wrapped around it. A royal coat of arms with a crown, maple leaves, a rose and clover fills the upper left.]

— Page 29 —
Description of “Perfect” Saddle Post Clamp.

THE accompanying cut shows the Saddle Post Clamp used on our “Perfect” models and is constructed as follows:—The frame forging is threaded at the upper end to the depth of about ¾-in. to receive a ring made hexagon at the upper end, which projects about ¼-inch above the seat post tube. Immediately below the threaded portion is a tapered section about ¾-in. long to receive a split-tapered bushing. As the nut is forced down, it comes in contact with the tapered bushing and forces the two tapered surfaces together, causing the split bushing to contract and bind saddle post. All parts are made from the best material, and are strong and perfect in adjustment, besides giving the machine a natty and finished appearance.

Used on our “Perfect” bicycles only.

Cut of “Perfect” Saddle Post Clamp.

Cut of “Perfect” Adjustable Seat Post.

These cuts explain themselves. The part that carries the saddle sits equally in front or rear of the post and the rider has an adjustable carrier with nothing to interfere with the free movement of the springs of the saddle.

Used on our “Perfect” bicycles only.

[The “Perfect” saddle post clamp in a cutaway engraving, and the “Perfect” adjustable seat post shown in two engravings, one with its parts laid out beside the post. A crown with roses, clover and four maple leaves fills the upper margin, signed in small letters at lower left “J L JONES ENG CO Toronto”.]

— Page 30 —
Parts of Our Automatic Brake.

Callouts: 6 5 4 3 2 1
FIXED DRUM
Callouts: 9 7 8

Patent Automatic Brake used on our “Perfect” Bicycles only.

Fig. 1—Hub. | Fig. 2—Collar. | Fig. 3—Sprocket.
Fig. 4—Expansion Ring. | Fig. 5—Set Nut. | Fig. 6—Drum.
Fig. 7—Brake in place. | Fig. 8—Cross Section. | Fig. 9—Cross Section.

[Parts of Our Automatic Brake for the “Perfect” bicycles: six separate parts in a row, a drum seen from the end marked “FIXED DRUM”, a cross section, and the brake in place on a rear hub with spokes and chain. The engraving is signed “J L JONES ENG CO TORONTO” near the lower right, and floral engraved ornament fills the upper left.]

— Page 31 —
Attention.

Riders of Welland Vale Bicycles having the Automatic Brake attached are particularly requested to keep the Brake WELL OILED. There is a Screw or Oiler on lug that bears against the upper edge of fork end, where the oiling should be done, and it is absolutely necessary to oil frequently to keep the Brake in proper condition.

Welland Vale Mfg. Co., Limited.

[A short notice headed “Attention.” asking riders of Welland Vale Bicycles with the Automatic Brake to keep it well oiled, signed Welland Vale Mfg. Co., Limited, with a small flourish after the heading and the rest of the page blank.]

— Page 32 —

[A blank page with no printing, marks or ornament.]

— Page 33 —
Description of
New Departure Automatic Brake.

THE illustrations opposite show The New Departure Bicycle Controller in its several parts, and in position on the rear hub. The Brake is Absolutely Automatic, giving complete control of the wheel, either for slackening up or coming to a full stop suddenly in case of danger from obstruction of any sort, with no conscious effort on the part of the rider, and without the slightest danger of straining any part of the bicycle.

It adds practically nothing to the weight of the machine, in no way changes the normal condition of machine or rider, and is not conspicuous when applied to the machine.

It occupies the space between the Sprocket and Fork on the rear hub, and the Brake proper consists of but two pieces, viz: the Expanding Ring and the Drum, brought into action when the rider holds back on pedals.

When sent out from the factory the Brakes are already assembled, so that it is merely necessary to remove the present Sprocket from the rear hub, screw on Brake, put in the Set Nut, place the Drum over all, and put the wheel back into the frame, full instructions for doing which accompany each Brake, so that mistake is impossible.

The Brakes are made in two sizes, viz: for hubs up to and including 1½-in. diameter, the other for hubs above 1½-in. diameter. The diameter of hub is measured at thread and upon which Sprocket is seated.

For the smaller sized hubs all Sprockets are interchangeable from eight teeth and upwards. For the larger sized hubs, Sprocket must have nine teeth or more. The Brake cannot be furnished for Sprocket having less than eight teeth.

The several parts are as follows: Figure 2 is a small hardened steel Collar, which screws into the hub in place of the old Sprocket.

Upon this Collar is mounted the Sprocket, figure 3, which turns loosely between the small square lug and the flange.

Figure 4 is a finely tempered steel spring which slips over the Collar (2), the spring being opened so that the small end rests against the underside of the lug on the collar, the large end against the upper side, and the projection setting into the space cut away in the Sprocket.

The Set Nut (figure 5) is now screwed in, the flange setting up against face or edge of spring and with the wrench set up firmly.

This Set Nut has a left-hand thread. The Drum (figure 5), is then slipped on in place and the wheel put into the frame and fastened in usual way.

The Sprocket is now locked against all forward motion of its own, but with the influence of the chain travels forward carrying all parts with it. When the rider ceases to pedal forward and attempts to hold back, the Sprocket travels backward on the collar, opening Spring (4) until its outer surface is brought into contact with the inner surface of the cap, causing powerful braking action, and giving the rider absolute control of the wheel, allowing him to stop gradually or quickly as necessity may demand.

When the hub is constructed specially to include the Brake as a component part, the end of the hub, instead of being formed with right and left hand screw threads, is formed with a flange and lug, as shown on the Collar, (figure 2). This does away with the necessity for this Collar, and also for the Set Nut (figure 5) and reduces the Brake to two pieces, the Spring and Cap above noted, the Sprocket, of course, being necessary in any event.

[A page headed Description of New Departure Automatic Brake, with an engraved crown, maple leaf, rose, thistle and shamrock ornament at the top left and the brake text in paragraphs. A faint gray dealer’s rubber stamp lies across the top right, partly cut off at the right edge.]

— Page 34 —
SADDLES.

Christy—Top View.
Christy—Bottom View.

THE CHRISTY SADDLE will be the regular equipment for our “Perfect” Bicycles. It has been recognized by the riders and is confirmed by testimonials from the leading physicians and surgeons of the country as the only correct anatomical saddle on the market, and the only one that positively prevents saddle injury.

No. 1—Men’s Models, medium size, 8¼-in. seat.
No. 3—Men’s Models, large size, 9-in. seat.
No. 8—Women’s Models, large size, 9-in. seat.

We will continue to equip our bicycles with the Laced Pattern Saddles as we have found them very satisfactory to a large number of riders.

Laced Hygiene Pattern.

This will be a favorite saddle for 1898 and we recommend it as a strong and comfortable seat.

Brown Pattern.

[The Christy saddle in engraved top and bottom views, with the Laced Hygiene Pattern and Brown Pattern saddles, and text on the saddles for “Perfect” bicycles. The top view carries a patent notice lettered along its center slot.]

— Page 35 —
Directions for Assembling and Removing
The “Perfect” Crank Axle.

Every ’98 Model Welland Vale Bicycle is supplied with a Wrench or Spanner.

TO remove the Crank Axle, for cleaning or repairs, follow carefully the instructions as given below:

By use of the spanner, unscrew the hexagon lock-nut on the left-hand side. Be careful to note that this nut has a left-hand thread.

After removing the nut, also remove the lock washer, which is directly underneath.

Then insert the two prongs of the spanner into the holes in the cone and unscrew the same, being careful to remember that this cone has a left-hand thread. Remove the cone over the crank.

Next apply the spanner to the left-hand cup, as per first cut on this page and unscrew the same. This cup also has a left-hand thread, so turn to the right to loosen. Remove the cup by passing over the crank.

After doing this, slide the axle to the right about one inch, so as to allow using the spanner on the right-hand or sprocket side.

The cup on the right-hand side has a right-hand thread. Apply the spanner the same as on the left-hand cup, but turn to the left to loosen. Unscrew until free from the bracket, then remove the crank by tipping, as per cut below.

To assemble, reverse the order given for removal.

To adjust bearings, loosen the lock-nut and apply spanner to cone, tightening same until perfect adjustment is secured, after which securely lock by tightening hexagon nut.

If these instructions are carefully followed, the rider will find it a very simple matter to remove the axle, and after a few times, will be able to assemble and remove very rapidly.

[Directions for assembling and removing the “Perfect” crank axle, with engraved drawings of a hand holding a spanner at a crank axle with a chainwheel, a crank and a spanner, and a crank axle being tipped out of the bracket. The text is set in short lines around the drawings and a rose and maple leaf ornament fills the top left.]

— Page 36 —
Handle Bars.

1 2 3
4 5 6
7

All of the above styles made with ⅞-in. and 1-in. stems. The No. 7 Bar is fitted to our “Perfects” only, and is the neatest and safest adjustable Handle-Bar made. It can be quickly and easily set at any desired angle, or can be completely reversed. It is self-locking and absolutely safe, and is fitted with best cork grips.

Wood Handle-Bars.—We will furnish Wood Bars when ordered, but do not recommend or guarantee them. The purchaser must take the risk of them warping and getting out of shape.

[Handle Bars: engraved drawings of seven handlebar styles numbered 1 to 7 with cork grips, number 7 shown in two views with its adjustable stem, below a crown, maple leaf, rose and shamrock ornament.]

— Page 37 —
PEDALS. We make our own pedals, which are of the barrel pattern. The centre piece or barrel is turned out of solid bar steel. The side or frame is formed in one piece, thus presenting no outside ends to break off. The cones are turned from solid bar tool steel and carefully tempered. The pedals are thoroughly dust proof and very neat.

A Glimpse near ST CATHARINES

[A barrel pedal shown whole and as separate parts in an engraved drawing, with the pedals text, and below it a decorative panel of cattails and a water lily around a halftone photograph of a bridge over a stream with cattle, lettered A Glimpse near ST CATHARINES on a scroll banner. The tips of the cattails rise into the text lines.]

— Page 38 —
Price List of Parts for Repairs.
In ordering parts never fail to give number of your wheel.

| 1896 | | | 1897 | | | 1898 | | |
FRAME GROUP. | PERFECT | GARDEN CITY | DOMINION | PERFECT | GARDEN CITY | DOMINION | PERFECT | GARDEN CITY | DOMINION | CHAINLESS
Frame …. | $30 00 | $25 00 | $22 00 | $30 00 | $25 00 | $22 00 | $30 00 | $25 00 | $20 00 | $30 00
Name Plate …. | 35 | 25 | 25 | 35 | 25 | 25 | 35 | 35 | 25 | 35
Name Plate Screws, each …. | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03
Seat Post Bolt …. | 20 | 20 | 15 | 20 | 20 | 20 | | 20 | 20 | 20
Nut for same …. | 05 | 05 | 00 | 05 | 05 | 05 | | 05 | 05 | 05
Top Head Case …. | 50 | 50 | 50 | 50 | 50 | 50 | 75 | 50 | 50 | 75
Top Head Cone …. | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50
Bottom Head Case …. | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50
Bottom Head Cone …. | 35 | 25 | 15 | 50 | 50 | 50 | 50 | 50 | 50 | 50
Seat Post, Nickeled …. | 1 25 | 1 25 | 75 | 3 00 | 1 50 | 1 25 | 3 00 | 1 50 | 1 50 | 3 00
Seat Post, Bushing …. | | | 50 | | | 50 | | | |

FRONT WHEEL GROUP.
Front Wheel, without Tire …. | 14 00 | 14 00 | 12 50 | 14 00 | 14 00 | 12 50 | 14 00 | 12 00 | 12 00 | 14 00
Front Hub, including Case …. | 3 50 | 3 50 | 3 00 | 5 00 | 4 50 | 4 00 | 5 00 | 4 50 | 4 00 | 5 00
Front Hub Case …. | 50 | 50 | 35 | 50 | 50 | 35 | 50 | 50 | 35 | 50
Front Oil Band …. | | | 05 | | | | | | |
Oil Cup …. | | | | | 15 | 15 | | | 15 |
Front Cone …. | 50 | 50 | 35 | 50 | 50 | 35 | 50 | 50 | 35 | 50
Front Axle …. | 75 | 35 | 35 | 75 | 35 | 35 | 75 | 75 | 35 | 75
Front Axle Nut …. | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05
Front Spokes, Nickeled …. | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10
Front Axle Washer …. | 05 | 05 | 05 | 05 | 05 | 05 | 06 | 05 | 05 | 05
Front Nipples, Nickeled, each …. | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05[?] | 05 | 05
Washers for Wood Rims …. | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03
Front Rim Drilled for Spokes …. | 1 75 | 1 75 | 1 40 | 1 75 | 1 75 | 1 40 | 1 75 | 1 75 | 1 50 | 1 75
Steel Balls, per dozen …. | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25
Ball Retaining Washer …. | | | | 10 | 10 | 10 | 10 | 10 | 10 | 10

REAR WHEEL GROUP.
Rear Wheel without Tire …. | 17 50 | 17 50 | 16 00 | 17 50 | 17 50 | 16 00 | 17 50 | 17 50 | 15 00 | 20 00
Rear Hub, including Cases …. | 5 50 | 5 50 | 4 50 | 7 00 | 6 50 | 5 50 | 7 00 | 5 00 | 5 00 | 8 00
Rear Hub Case …. | 75 | 75 | 50 | 75 | 75 | 50 | 75 | 75 | 50 | 1 00
Rear Hub Sprocket …. | 1 75 | 1 50 | 1 50 | 1 75 | 1 50 | 1 50 | 1 75 | 1 50 | 1 50 |
Rear Hub Sprocket Lock Nut …. | 75 | 50 | 50 | 75 | 50 | 50 | 75 | 50 | 50 |
Rear Hub Oil Band …. | | | 05 | | | | | | |
Oil Cup …. | | | | | 15 | 15 | | | 15 |
Rear Axle …. | 90 | 50 | 50 | 90 | 50 | 50 | 75 | 50 | 50 | 75
Rear Axle Washer …. | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05 | 05
Rear Cone …. | 60 | 60 | 50 | 60 | 60 | 50 | 1 00 | 60 | 50 | 1 00
Rear Axle Nut …. | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10
Steel Balls, per dozen …. | 50 | 35 | 35 | 50 | 35 | 35 | 50 | 50 | 50 | 50
Rear Step …. | 35 | 25 | 25 | 35 | 35 | 25 | 35 | 35 | 25 | 35
Ball Retaining Washer …. | | | | 10 | 10 | 10 | 10 | 10 | 10 | 10
Rear Rim, drilled for 32 spokes …. | 1 75 | 1 75 | 1 40 | 1 75 | 1 75 | 1 75 | 1 75 | 1 75 | 1 50 | 1 75
Rear Rim Washer …. | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03 | 03

FRONT FORK GROUP.
Front Fork, complete …. | 6 00 | 5 00 | 4 50 | 6 00 | 6 00 | 5 00 | 6 00 | 6 00 | 5 00 | 6 50
Fork Sides, each …. | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50
Fork Crown Tube …. | 75 | 75 | 75 | 1 00 | 1 00 | 1 00 | 1 00 | 1 00 | 1 00 | 1 25
Handle Bar, complete …. | 5 00 | 4 50 | 4 00 | 7 50 | 5 00 | 4 50 | 7 50 | 5 00 | 4 50 | 7 50
Handle Bar, Cork Grip, each …. | 50 | 30 | 30 | 50 | 30 | 30 | 50 | 30 | 30 | 50
Handle Bar Clamp …. | 1 00 | 1 00 | 1 00 | 1 25 | 1 25 | 1 00 | | 1 25 | 1 00 |
Handle Bar Clamp Bolt …. | 20 | 20 | 20 | 25 | 25 | 20 | | 25 | 20 |
Handle Bar Clamp Bolt Nut …. | 05 | 05 | 05 | 05 | 05 | 05 | | 05 | 05 |
Coasters, complete …. | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20
Coaster’s Nut and Bolt …. | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10
Handle Bar Bind …. | | | | | | | 1 50 | | | 1 50
Seat Post, Tapered Bushing …. | | | | | | | 10 | | | 10
Seat Post Nut …. | | | | | | | 15 | | | 15
Nut for Handle Bar Binder …. | | | | | | | 05 | | | 05

[A table headed Price List of Parts for Repairs with columns for the Perfect, Garden City, Dominion and Chainless models under the years 1896, 1897 and 1898, in the Frame, Front Wheel, Rear Wheel and Front Fork groups, with prices in dollars and cents.]

— Page 39 —
Price List of Parts for Repairs.—Continued.

| 1896 | | | 1897 | | | 1898 | | |
CRANK BRACKET GROUP. | PERFECT | GARDEN CITY | DOMINION | PERFECT | GARDEN CITY | DOMINION | PERFECT | GARDEN CITY | DOMINION | CHAINLESS
Crank Bracket Case …. | $1 00 | $1 00 | $ 60 | $1 50 | $1 50 | $ 75 | $1 50 | $1 50 | $ 75 | $1 50
Crank Bracket Adjusting Cone …. | 75 | 75 | 90 | 1 25 | 1 00 | 90 | 1 25 | 1 00 | 90 | 1 25
Crank Bracket Stationary Cone …. | 75 | 75 | 50 | 75 | 75 | 50 | 75 | 75 | 50 | 1 00
Lock Nut …. | | | | 50 | 50 | | 50 | 50 | 50 | 50
Washer …. | | | | 10 | 10 | | 10 | 10 | 10 | 10
Ball Retaining Washer …. | | | | 15 | 15 | | 15 | 15 | 15 | 15
Crank Bracket, Spring Oilers …. | 10 | 10 | 10 | | 10 | 10 | | | 10 |
Crank Shaft …. | 4 50 | 4 50 | 75 | 4 50 | 4 50 | 1 50 | 4 50 | 4 50 | 4 50 | 4 50
Cranks, each …. | | | 1 25 | | | 2 00 | | | |
Crank Key and Nut …. | | | | | | 25 | | | |
Crank Cone, Adjusting Dog …. | 50 | 50 | 10 | | | | | | |
Sprocket, Front, 16, 17, 18, 19 teeth, each …. | | | 1 50 | | | 1 50 | | | |
Sprocket Rim Bolts …. | 10 | 10 | | 10 | 10 | | 10 | 10 | 10 |
Sprocket Rim Nuts …. | 05 | 05 | | 05 | 05 | | 05 | 05 | 05 |
Sprocket Rim, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, teeth …. | 2 00 | 2 00 | | 2 50 | 2 00 | | 2 50 | 2 00 | 2 00 | 2 50

MISCELLANEOUS.
New Departure Brake, Complete …. | | | | | | | 6 00 | | |
New Departure Drum, No. 6 …. | | | | | | | 1 00 | | |
New Departure Lock Nut, No. 5 …. | | | | | | | 50 | | |
New Departure Spring, No. 4 …. | | | | | | | 65 | | |
New Departure Sprocket, No. 3 …. | | | | | | | 1 00 | | |
New Departure Collar, No. 2 …. | | | | | | | 1 00 | | |
Side Shaft for Chainless Machine …. | | | | | | | | | | 2 50
Side Shaft, front gear, ” ” …. | | | | | | | | | | 2 00
Side Shaft, rear gear, ” ” …. | | | | | | | | | | 2 50
Rear Wheel Gear, ” ” …. | | | | | | | | | | 2 50
Crank Shaft, ” ” …. | | | | | | | | | | 4 00
Side Shaft, ball cup, ” ” …. | | | | | | | | | | 1 00
Side Shaft, Stationary Cone, Chainless Machine …. | | | | | | | | | | 1 00
Side Shaft, Adjusting Cone, Chainless Machine …. | | | | | | | | | | 1 25

PEDALS. Always state what pedal you require repairs for.
Pedals Complete, per pair …. | $5 00
Pedal Pin or Axle …. | 50
Pedal Balls, per dozen …. | 25
Pedal Rubbers, per set …. | 50
Pedal Cap …. | 25
Pedal Cone …. | 25
Pedal Nut …. | 05
Pedal Adjusting Washer …. | 05
Pedal Side or End …. | 25

CHAIN GROUP.
Hardened Block and Hardened Pin Chain …. | $6 00
Extra Link …. | 10
Chain Bolt and Nut …. | 10
Chain Adjuster …. | 25

SADDLE REPAIRS. Always state make and style of saddle when asking for repairs.
Screws, each …. | 10 and 15
Clamps, each …. | 50
Springs, each …. | 60 and 75

[The continuation of the Price List of Parts for Repairs with the Crank Bracket Group and Miscellaneous parts for the Perfect, Garden City, Dominion and Chainless models in a table of prices for 1896, 1897 and 1898, followed by shorter lists of prices for Pedals, Chain Group and Saddle Repairs.]

— Page 40 —
The Following is the
Tire Companies’ Guarantee
for 1898.

WE agree with the purchaser of each tire to make good by repair or replacement when delivered to us, transportation prepaid, any imperfection or defect in material or manufacture of such tire, not caused by misuse or neglect, provided such tire is accompanied by a signed statement from the owner, giving date on which the tire was purchased by him, together with the name and number of the wheel on which it was used, and that all imperfect or defective tires shall be referred to us, before any claim for repair or replacement shall be allowed.

We agree to repair, free of charge, any tire that can be repaired, provided such tire is delivered to us, transportation prepaid.

This guarantee continues for six months from the date of the sale by the agent, but expires in any event on May 1st, 1898.

This agreement does not apply to tires into which any so-called anti-leak preparation has been introduced, or to racing tires.

All claims for defective tires must be made direct to the tire manufacturers.

General Directions.

Discounts to the trade will be made known on application.

Goods sent C. O. D. when sufficient amount accompanies the order to provide for express charges both ways.

We cannot guarantee the safe delivery of goods. Our responsibility ceases when goods are delivered at Post Office, Express Office or Freight Depot.

In sending in repairs always tag and address them distinctly, with the full name and address of the sender, and promptly advise us by letter and by what route they are shipped.

Charges must be prepaid on all goods thus sent or they will not be accepted.

Welland Vale Mfg. Co., Limited.

[The Tire Companies’ Guarantee for 1898 and General Directions, signed Welland Vale Mfg. Co., Limited, with a coat of arms, maple leaves, a rose and shamrocks at the top left. An ink ring partly covers the last figure of the year in the guarantee’s expiry date.]

— Page 41 (inside back cover) —

[A blank white page with no printing, marks or stamps.]

— Page 42 (back cover) —
THE WELLAND VALE MFG. CO.
PERFECT
ST CATHARINES, ONT.

[stamp: JOHN BISHOP & SON., HARDWARE MERCHANTS, BRANTFORD.]

[illegible] HAMILTON[?]

[The color back cover with crossed flags and a red banner around a silvery plate badge lettered The Welland Vale Mfg. Co., Perfect and St Catharines, Ont. A red rubber dealer’s stamp lies across the top, and a tiny printer’s line runs along the lower left edge.]

Ebykr presents this material for research and education. If you hold rights to it or notice an ownership issue, please contact us and we will respond promptly.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.