Tange Frame System Catalog of about 1981 — the Champion Frame Set, Cr-Mo and Hi-Tension Tubes, Forks, Lugs, Fittings and Parts, BMX Components and the Export Packing Chart

Catalog 1981 (est.) 28 pages Japan

Source: bulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr.

About this document

MarqueTange
TypeCatalog
Year1981 (estimated)
PublisherTange Industries, Ltd., Sakai (Osaka) and Tokyo
CountryJapan
LanguageEnglish
Pages28
Sourcebulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr.
CreditEbykr archive
IdentifierPermalink http://bulgier.net/pics/bike/Catalogs/Tange/
TranscriptionTranscribed by eye
Cite this document

Reference

Tange Industries, Ltd., Sakai (Osaka) and Tokyo. Tange Frame System Catalog of about 1981: the Champion Frame Set, Cr-Mo and Hi-Tension Tubes, Forks, Lugs, Fittings and Parts, BMX Components and the Export Packing Chart. c. 1981. Ebykr, https://ebykr.com/library/tange-frame-system-catalog-about-1981/.

Wikipedia

{{cite book |title=Tange Frame System Catalog of about 1981: the Champion Frame Set, Cr-Mo and Hi-Tension Tubes, Forks, Lugs, Fittings and Parts, BMX Components and the Export Packing Chart |publisher=Tange Industries, Ltd., Sakai (Osaka) and Tokyo |date=c. 1981 |url=https://ebykr.com/library/tange-frame-system-catalog-about-1981/ |via=Ebykr |access-date=}}

Transcription

TANGE FRAME SYSTEM Tange TANGE TANGE FRAME SYSTEM Champion Frame Set ........ 7 BMX Frame Set ........ 7 "Cr-Mo" Frame Tube ........ 9 High Tension Frame Tube ........ 11 Frame Tube Cut Away Illustration ........ 11 Seat Stay & Chain Stay Set ........ 12 Front Fork System ........ 13 Front Fork Components ........ 14 Lug …

Read the full transcription (28 pages)

Twenty-eight pages of the Tange Frame System catalog: the Champion and BMX frame sets, the Cr-Mo and Hi-Ten tubes, forks, lugs, fittings and parts with their tables, the BMX and motocross components, the export packing chart and the Sakai and Tokyo addresses. No year is printed.

— Page 1 (front cover) —
TANGE FRAME SYSTEM
Tange TANGE

[The cover of the Tange Frame System catalog, with the title in large red letters above a blue bicycle frame and fork photographed against a gridded background and the Tange logo at the bottom. The paper is cream colored with a few age spots.]

— Page 2 —
TANGE FRAME SYSTEM
Champion Frame Set …….. 7
BMX Frame Set …….. 7
“Cr-Mo” Frame Tube …….. 9
High Tension Frame Tube …….. 11
Frame Tube Cut Away Illustration …….. 11
Seat [?] Stay & Chain Stay Set …….. 12
Front Fork System …….. 13
Front Fork Components …….. 14
Lug Set …….. 15
Front & Rear End Set …….. 16
Fork Crown …….. 16
Frame Fittings …….. 17
Welding of Cr-Mo Materials …….. 22
BMX Components …….. 23
Export Packing Chart …….. 25

[A contents list for the Tange Frame System catalog printed over a photograph of steel frame tubes, forks and small fittings on blue tiles, with the title in black letters at the top right. The list gives each section name with a page number at the right end of a rule.]

— Page 3 —
Tange’s “Champion” butted tubing is renowned throughout the bicycle racing world. It is no secret that racers can win or lose a race by as little as a fraction of a second. Lightness and precision manufacturing can make all the difference in giving the racer an advantage in speed. And as the bicycle frame constitutes the largest and heaviest part of the bicycle, it is the section viewed most critically by racers for weight saving. And this is where Tange’s specialized knowledge is most effective. By employing the highest techniques gained over almost 60 years of experience, Tange’s tubing is without equal. Precision made and light but at the same time strong where it matters. “Champion” tubing gives racers exactly what they demand.

[A chrome front fork and four rear dropout pieces lie on blue tiles, with a color photograph of a bunch of racing cyclists at the top right. A paragraph about “Champion” butted tubing is printed in italic lettering at the lower right over a fold line in the paper.]

— Page 4 —
TANGE BMX COMPONENTS

[A color photograph of BMX racers in blue helmets and red and blue clothing on a dirt track, with a chrome BMX fork and two painted BMX frames in the foreground and the title in red letters at the top left. Lettering on the racers’ helmets, the frames, the fork and the trackside board belongs to the photographed objects.]

— Page 5 —
BMX racing requires a special type of bicycle frame. The frame must be strong enough to endure endless thrashings. And light enough to handle well for outdistancing the opposition when racing.
With these requirements in mind, Tange created a new frame tubing especially for BMX. The first of its kind. The spectacular success of this tubing has given rise to unprecedented demand from BMX bicycle manufacturers.
In addition, Tange also developed the TRX front tubing. All those familiar with the top BMX bicycles will know that this is a constant favorite. The spiral interior design, for lightness and strength, and the oval tubing, for lightness, and aerodynamic efficiency are some of the reasons why Tange’s TRX front tubing takes some beating.
When specifying your BMX bicycle, make sure Tange tubing is at the top of your list.
TANGE HOT HEART BMX Racing Team

[Color photographs of BMX racers on a dirt track and a group portrait of a team in red and blue clothing with their bicycles, with a text panel about BMX frame tubing and TRX front tubing at the upper right. A caption below the text reads TANGE HOT HEART BMX Racing Team.]

— Page 6 —
60 Years of Experience
Is Responsible for TANGE’s World Renowned Products
Frame tubing and front forks are just some of the products manufactured by the largest supplier of this field in Japan. Tange’s commitment to research and development and strict quality control is responsible for the excellence inherent in each product. Tange experts personally supervise each stage of production within the corporation’s own premises. No part goes outside until manufacturing is completed. This means quality is of the highest order and explains why bicycle manufacturers throughout the world have come to rely on Tange workmanship.
Tange also makes a point of keeping abreast of the latest trends so that consumer demand is always anticipated. When combined with Tange’s own technology and metallurgical experience, going back 60 years, the end result is one of unsurpassed quality and precision. An example of Tange’s high technology and customer consideration is the unique process whereby all tubing heat treatment is carried out in unoxidizing furnaces. This enables Tange to give added strength, critical precision and a smoother surface to make the frame builder’s work much easier. As testimony to the reputation enjoyed by Tange, these products are exported to bicycle makers all over the world.
Unoxidized furnace treatment for added strength and precision.

[A light blue bicycle frame with its rear triangle shown over a color photograph of a machine working on a lug, with a second small photograph of a worker at a furnace at the lower left. The page is headed “60 Years of Experience” and carries two paragraphs of text and a caption about unoxidized furnace treatment.]

— Page 7 —

[A full-page color photograph of a silver-gray bicycle frame and fork standing in a factory hall with large round furnaces behind it, with no printed text on the page. The frame carries the lettering “SPECIAL VIVALO” on the top tube and “VIVALO” on the down tube, and a “CHAMPION” decal sits on the fork.]

— Page 8 —
CHAMPION FRAME SET
CHAMPION FRAME SYSTEM
Product | | | 1 Fork Stem | 2 Fork Blade | 3 Head Tube | 4 Top Tube | 5 Down Tube | 6 Seat Tube | 7 Seat Sta[cut off]
Parts | | | 1 | 2 | 1 | 1 | 1 | 1 | 2
Cr-Mo | CHAMPION AERO | | No. 1706 | No. 1606 | No. 1406 | No. 1416 | No. 1436 | No. 1456 | No. 1506 [cut off]
| CHAMPION Pro 0.6 ~ 0.3t | Double Butted (D-BT) | No. 1700 | No. 1600 | No. 1401 | No. 1410 | No. 1430 | No. 1450 No. 1451 | No. 1500 [cut off]
| CHAMPION No. 1 0.8 ~ 0.5t | Double Butted (D-BT) | No. 1700 | No. 1601 | No. 1401 | No. 1411 | No. 1431 | No. 1452 | No. 1501 [cut off]
| CHAMPION No. 2 0.9 ~ 0.6t | Double Butted (D-BT) | No. 1700 | No. 1601 | No. 1401 | No. 1412 | No. 1432 | No. 1452 | No. 1501 [cut off]
| CHAMPION No. 3 1.0 ~ 0.7t | Double Butted (D-BT) | No. 1700 | No. 1601 | No. 1401 | No. 1413 | No. 1433 | No. 1452 | No. 1501 [cut off]
| CHAMPION No. 4 0.9 ~ 0.7t | Single Butted (S-BT) | No. 1700 | No. 1601 | No. 1401 | No. 1414 | No. 1434 | No. 1453 | No. 1501 [cut off]
| CHAMPION No. 5 0.9t | Plain Gauge (P.G) | No. 1700 | No. 1601 | No. 1401 | No. 1415 | No. 1435 | No. 1454 | No. 1501 [cut off]
Hi-Tension (H.T) | No. 101 1.2 ~ 0.9t | Double Butted (D-BT) | No. 1720 | No. 1620 No. 1621 | No. 1470 | No. 1420 | No. 1440 | No. 1460 | No. 1520 [cut off]
| No. 102 1.2 ~ 0.9t | Single Butted (S-BT) | No. 1720 | No. 1620 No. 1621 | No. 1470 | No. 1421 | No. 1441 | No. 1461 | No. 1520 [cut off]
TANGE BMX FRAME SYSTEM
CHAMPION OVAL BUTTED TUBES CHROME MOLYBDEN STEEL[?] TANGE INDUSTRIES, LTD.
CHAMPION motocross BUTTED TUBES CHROME MOLYBDEN STEEL[?] TANGE INDUSTRIES, LTD.
CHAMPION motocross P.G. TUBES CHROME MOLYBDEN STEEL[?] TANGE INDUSTRIES, LTD.
Mangaloy BUTTED MANGANESE ALLOY TUBING TANGE INDUSTRIES LTD
No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
Product | Head Tube | Top Tube | Down Tube | Seat Tube | Seat Stay | Chain Stay | Bridge | Bottom Bracket | Rear Fork End | Gasket Rein-force-ment Plate | Front Fork | Use
Parts | 1 | 1 | 1 | 1 | 2 | 2 | 1 | 1 | 2 | 1 | |
Cr-Mo Double Butted Oval Tube | 36.6 x 2.0 | 28.6 x 1.0/0.8 Oval D.B.T | 28.6 x 1.0/0.8 Oval D.B.T | 25.4 x 1.3 P.G | 15.9 x 1.0 Oval P.G | 22.2 x 0.8 Oval P.G | 15.9 x 1.0 P.G | 57 x 51.5 | 3.2t | 2.8t Double Gasket | TANGE TRX | Racing
Cr-Mo Double Butted Tube | 36.6 x 2.0 | 28.6 x 1.2/0.9 D.B.T | 28.6 x 1.2/0.9 D.B.T | 25.4 x 1.3 P.G | 15.9 x 1.0 P.G | 15.9 x 1.0 P.G | 15.9 x 1.0 P.G | 57 x 51.5 | 3.2t | 2.8t Double Gasket | TANGE TX-SUPER | Racing
Cr-Mo P.G. Tube | 36.6 x 2.0 | 25.4 x 1.2 | 25.4 x 1.2 | 25.4 x 1.3 | 15.9 x 1.0 | 15.9 x 1.0 | 15.9 x 1.0 | 57 x 51.5 | 3.2t | 2.8t Single | TANGE TX-500W | Racing & Leisure
Mangaloy Tube | 36.6 x 2.0 | 25.4 x 1.3 | 25.4 x 1.3 | 25.4 x 1.3 | 15.9 x 1.3 | 15.9 x 1.3 | 15.9 x 1.3 | 57 x 51.5 | 3.2t | 2.8t Single | TANGE TX-1200W TANGE TX-1200 | Racing & Leisure
7

[The Champion Frame Set page with a table of Champion Cr-Mo and Hi-Tension tube numbers by frame part, and the Tange BMX Frame System table of tube sizes with four tube decals. The right edge of the page is trimmed, so the first table is cut off at its seventh column (Seat Stay); the further columns are not shown; the first table’s CHAMPION AERO label spans the two name columns, and the Front Fork names stand in one unruled column beside the four rows.]

— Page 9 —
TANGE FRAME SYSTEM
CHAMPION PRO CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION NO.1 CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION NO.2 CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION NO.3 CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION NO.4 CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION NO.5 CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
CHAMPION PRO FORK BLADE CR-MO STEEL TANGE
CHAMPION FORK BLADE CR-MO STEEL TANGE
8 Chain Stay | Seat Weight 23″ x 27″ | 9 Head Lug | 10 Seat Lug | 11 B.B. Shell | 12 Fork Crown | 13 End | Use
2 | 11 | 2 | 1 | 1 | 1 | 6 |
No. 1556 | | – | – | – | AERO No. 1175 AERO No. 1176 | No. 1216 No. 1316 |
No. 1550 | 1,600g | No. 1800 No. 1820 No. 1801 No. 1821 No. 1803 No. 1823 No. 1802 No. 1822 | No. 1840 No. 1841 No. 1845 No. 1846 No. 1843 No. 1847 No. 1849 No. 1842 | No. 1869 | For Road C10 No. 1171 C12 No. 1172 NR No. 1174 C1 No. 1151 C2 No. 1152 For Track CTR No. 1154 NT No. 1173 | SFP No. 1121 (Front) No. 1311 (Rear) TR No. 1215 (Front) No. 1315 (Rear) SF No. 1206 (Front) No. 1305 (Rear) TL No. 1212 (Front) No. 1308 (Rear) SFR No. 1206 No. 1306 | Road Racing
No. 1551 | 1,960g | | | | | | Track Racing Road Racing
No. 1551 | 2,050g | | | | | | Track Racing Road Racing Touring
No. 1551 | 2,130g | | | | | | Heavy Duty Touring Touring
No. 1551 | 2,050g | | | | | | Road Racing Touring
No. 1551 | 2,230g | | | | | | Road Racing Touring
No. 1560 | 2,710g | No. 1810 No. 1830 | No. 1850 No. 1855 | | AL-2 No. 1117 AL-7 No. 1118 CCL No. 1120 | TF No. 1210 (Front) No. 1213 (Front) No. 1308 (Rear) | Road Racing Touring
No. 1560 | 2,630g | | | | | | Road Racing Touring
CR-MO COMPOSITION (SAE 4130)
C | S1 | Mn | Mo | S | P | Cr
0.33% | 0.35% | 0.85% | 0.25% | 0.03% Max | 0.03% Max | 1.2%
MANGALOY COMPOSITION
C | Si | Mn | P | S | Cu | Ti
0.12 Max. | 0.15~0.35 | 0.90 Max. | 0.06 Max. | 0.035 Max. | 0.25~4.50 | 0.15 Max.
HI-TENSION COMPOSITION
C | Si | Mn | P | S | Cu | Ti
0.09% | 0.23% | 0.67% | 0.06 Max. | 0.02% Max. | 0.29% | 0.04%
8

[The Tange Frame System page continuing the Champion table, with decals for Champion Pro and Champion No. 1 to No. 5 butted tubes and two Champion fork blade decals, tables of tube-set numbers, seat weights and uses, and three tube composition tables. The numbered cells in the head lug, seat lug, B.B. shell, fork crown and end columns are merged blocks spanning the Cr-Mo rows, with a curved bracket drawn beside the head lug numbers; they are set here in the first row of each block. Two photographs on pink backgrounds show loose frame tubes, one a road frame set and one a BMX frame set.]

— Page 10 —
“CR-MO” FRAME ORDER SYSTEM
Fork Stem
Head Tube
Top Tube
Fork Blade
Down Tube
Seat Tube
Seat Stay
Chain Stay
CHAMPION PRO CHROME MOLYBDEN STEEL[?] BUTTED TUBES TANGE INDUSTRIES, LTD.
“Cr-Mo” Butted Tube
Note: All dimensions in this catalogue are mentioned by “mm”.
BUTTED TUBE
Callouts: L C T1 ℓ1[?] ℓ2 T2 ℓ’2 ℓ’1 T’1 D
Product | Description | Outside dia. D | Part No. | Thickness T1~T2~T’1 | Length of butted part ℓ2[?] | Length of butted part ℓ’1 | Length of tapered part ℓ2 | Length of tapered part ℓ’2 | Length of thin-ned part C | Length L | Weight
Top Tube | Double Butted | 25.4φ | 1410 | 0.6~0.3~0.5 | 80 | 120 | 50 | 50 | 250 | 550 | 160g
| | | 1411 | 0.8~0.5~0.8 | 80 | 130 | 50 | 50 | 290 | 600 | 240g
| | | 1412 | 0.9~0.6~0.9 | | | | | | | 274g
| | | 1413 | 1.0~0.7~1.0 | | | | | | | 309g
| Single Butted | | 1414 | 0.9~0.7 | 90 | — | 50 | — | | 600 | 270g
| Plain Gauge (P.G) | | 1415 | 0.9 | — | | | | | | 542g/m
Down Tube | Double Butted | 28.6φ | 1430 | 0.6~0.3~0.6 | 80 | 120 | 50 | 50 | 250 | 550 | 180g
| | | 1431 | 0.8~0.5~0.8 | 80 | 180 | 50 | 50 | 290 | 650 | 295g
| | | 1432 | 0.9~0.6~0.9 | | | | | | | 340g
| | | 1433 | 1.0~0.7~1.0 | | | | | | | 380g
| | | 1136 | 1.2~0.9~1.2 | | | | | | |
| Single Butted | | 1434 | 0.9~0.7 | 90 | — | 50 | — | | 615 | 315g
| Plain Gauge (P.G) | | 1435 | 0.9 | — | | | | | | 613g/m
Seat Tube | Double Butted | 28.6φ | 1450 | 0.6~0.3~0.6 | 80 | 120 | 50 | 50 | 250 | 550 | 180g
| | | 1451 | 0.8~0.5~0.8 | 80 | 170 | 50 | 50 | 250 | 550 | 180g
| | | 1452 | 0.9~0.6~0.9 | 80 | 180 | 50 | 50 | 250 | 610 | 300g
| Single Butted | | 1453 | 0.9~0.7 | 90 | — | 50 | — | | 610 | 312g
| Plain Gauge (P.G) | | 1454 | 0.9 | — | | | | | | 613g/m
Head Tube | Plain Gauge (P.G) | 31.8φ | 1401 | 1.0 | — | | | | | 200 | 152g
9

[The “Cr-Mo” Frame Order System page with a pink photograph of loose frame tubes labeled Fork Stem, Head Tube, Top Tube, Fork Blade, Down Tube, Seat Tube, Seat Stay and Chain Stay, a Champion Pro decal, and a drawing of a butted tube with its length and thickness callouts. The table lists Top Tube, Down Tube, Seat Tube and Head Tube part numbers with thickness, lengths and weights; the length cells for part numbers 1411 to 1413 and 1431 to 1433 are merged blocks set here in the first row of each block, and the dash for the plain gauge and head tube rows spans the length columns up to column C.]

— Page 11 —
TANGE FRAME SYSTEM
“Cr-Mo” Seat & Chain Stay
SEAT STAY & CHAIN STAY
Callouts: D1 ℓ1 L ℓ2 t1 D2 D3
Product | Part No. | Thickness For “PRO” | Thickness For No. 1-2 | Outside Diameter D1 | Outside Diameter D2 | Straight Part ℓ1 | Tapered Part ℓ2 | Total Length L | Weight (pair)
Seat Stay | 1500 | 0.6 | | 14φ | 11φ | 280 | 320 | 600 | 240g
| 1501 | | 0.8 | | 10φ | 240 | 360 | | 310g
Chain Stay | 1550 | 0.6 | | 22.2φ | 12.5φ | 70 | 340 | 420 | 220g
| 1551 | | 0.8 | | | | | | 300g
● Seat Stay “Cr-Mo” Special Spec Product
Part No. | Outside diameter D1 | Outside diameter D2 | Thickness t1 | Straight part ℓ1 | Tapered part ℓ2 | Total Length L | Weight (pair)
1502 | 14.5φ | 11φ | 0.8 | 280 | 320 | 600 | 325g
1503 | 15.9φ | | | | | | 355g
● Chain Stay “Cr-Mo” Special Spec Product
Part No. | Thickness t | Outside Diameter D1 | Outside Diameter D2 | Outside Diameter D3 | Straight part ℓ1 | Tapered part ℓ2 | Total Length L | Weight (pair)
1552 | 0.8 | 22.2φ | 12.5φ | 24φ | 22 | 110 | 420 | 300g
1553 | 0.8 | 22.2φ | 12.5φ | 30×19 | 22 | 110 | 420 | 310g
1554 | 0.8 | 22.2φ | 12.5φ | 27×16 | 80 | 105 | 420 | 300g
“Cr-Mo” Fork Blade
FORK BLADE
Callouts: R190, R400, R250 d3 t1 d1 d2 ℓ L

Part No. | Use | Thickness (even thickness) t1 | Outside diameter d1 xd2 | Outside diameter d3 | Straight Part ℓ | Total Length L | Weight (pair)
1600 | For “PRO” | 0.9 | 28.6 x16.4 | 12.7φ | 100 | 420 | 300g
1601 | No. 1-3 | 1.0 | | | | | 390g
Bent | For Champion “PRO” | No. 1610
| For No. 1-3 | No. 1611
● “Cr-Mo” Special Spec Product
Oval shape Part No. | Oval shape Size | Oval shape Section d1 xd2 | Thickness (even thickness) t1 t2 | Round shaped Part No. | Round shaped Size D1 | Regular size Tip dia meter D2 | Regular size Straight part ℓ | Regular size Total Length L | Weight (pair)
1600 | 23 | | 0.9 | 1603 | 23φ | 12.7φ | 100 | 420 | 300g
1601 | 23 | 28.7×16.4 | 1.0 | 1602 | 23φ | | | | 390g
1605 | 24 | 27.4×20.6 | 1.0 | 1608 | 24φ | | | | 390g
“Cr-Mo” Fork Stem
SPIRAL FORK STEM
Callouts: T2 D2 D1 T1 T2 60° L ℓ
| D1 | D2 | T1 | T2 | l | l
No. 1700 | 25.4φ | 22.2φ | 2.5 | 1.6 | 60 | 254
No. 1701 | 25.4φ | 21.2φ | 2.5 | 2.1 | 60 | 254
10

[The “Cr-Mo” Seat and Chain Stay, Fork Blade and Spiral Fork Stem page, with drawings of tapered stays, a bent fork blade marked with radii and a spiral fork stem with its cross section, and tables of part numbers, thickness, diameters, lengths and weights. Cells printed once across several rows, such as the D1 diameter, total length and the fork blade size cells, are merged blocks set here in the first row of each block.]

— Page 12 —
“HIGH-TENSION” FRAME TUBE
“Hi-Ten” Frame Tube
FRAME TUBE
Callouts: T1 T2 T’1 D ℓ1 ℓ2 C ℓ’2 ℓ’1 L
Product | Description | Outside Diameter D | Part No. | Thickness T1~T2~T’1 | Butted Part Length ℓ1 | Butted Part Length ℓ’1 | Tapered Part Length ℓ2 | Tapered Part Length ℓ’2 | Length of Thinned Part C | Total Length L | Weight
Top Tube | Double | 25.4φ | 1420 | 1.2~0.9~1.2 | 75 | 125 | 40 | 40 | 280 | 560 | 345g
| Single | | 1421 | 1.2~0.9 | 90 | — | 40 | — | — | | 325g
Down Tube | Double | 28.6φ | 1440 | 1.2~0.9~1.2 | 75 | 115 | 40 | 40 | 330 | 600 | 420g
| Single | | 1441 | 1.2~0.9 | 90 | — | 40 | — | — | 600 | 395g
Seat Tube | Double | 28.6φ | 1460 | 1.2~0.9~1.2 | 75 | 115 | 40 | 40 | 280 | 600 | 420g
| Single | | 1461 | 1.2~0.9 | 90 | — | 40 | — | — | | 395g
Head Tube | Plain Gauge (P.G) | 31.8φ | 1470 | 1.2 | — | — | — | — | — | 150 | 135g
Frame Tube Cut Away Illustration
Top Tube
Down Tube
Seat Tube
Down Tube
Callouts: φ31.8 φ28.6 a β ℓ b φ31.8 a ℓ φ31.8 R20 5 ℓ φ31.8 β b R20 a ℓ
11

[The “High-Tension” Frame Tube page with a drawing of a butted tube with its dimension callouts and a table of Hi-Ten top tube, down tube, seat tube and head tube part numbers, thickness, lengths and weights. Below it, on a pink panel headed “Frame Tube Cut Away Illustration,” four line drawings show the mitered ends of a top tube, two down tubes and a seat tube with angles and radii; the total length cells for 1420 and 1421 and for 1460 and 1461 are merged blocks set here in the first row.]

— Page 13 —
TANGE FRAME SYSTEM
“Hi-Ten” Tapered Tube
TAPERED TUBE
Callouts: L T ℓ1 ℓ2 D1 D2
Product | Part No. | Thickness T | Outside Diameter D1 | Outside Diameter D2 | Straight Part ℓ1 | Tapered Part ℓ2 | Total Length L | Weight
Seat Stay | 1520 | 1.0 | 14φ | 11φ | 280 | 320 | 600 | 348g
Chain Stay | 1560 | 1.0 | 22.2φ | 12.5φ | 80 | 340 | 420 | 390g
Fork Blade | 1620 | 1.2 | Oval. 28.7×16.4 | 13φ | 80 | 320 | 400 | 520g
| 1621 | 1.2 | 23φ | 13φ | | | | 520g
“Hi-Ten” Fork Stem
FORK STEM
Callouts: T1 ℓ1 ℓ2 T2 D L
Outside Diameter D | Inside Diameter | Thickness T1 | Thickness T2 | Butted Part ℓ1 | Tapered Part ℓ2 | Total Length L | Weight
25.4φ | 22.2φ | 2.7 | 1.6 | 50 | 25 | 254 | 260g
25.4φ | 21.2φ | 2.7 | 2.1 | 50 | 25 | 254 | 315g
Seat Stay & Chain Stay Set
Seat Stay Work Order No.
SW-1
SW-2
SW-3
SW-4
SW-5
Chain Stay Work Order No.
CW-1 Pressed Section
CW-2 Oval Shape
CW-3 Round Shape
CW-4 Plug Shape (for 24φ)
24φ
Chain Stay Tip Work Order No.
E-1 Diagonal Cutting
E-2 Track Type
E-3 Triangular Cutting
E-4 Round Tip
E-5 Diagonal Press (Vertical Cut)
E-6 Diagonal Press (Diagonal Cut)
12

[The “Hi-Ten” Tapered Tube and Fork Stem page with drawings and tables of seat stay, chain stay, fork blade and fork stem sizes and weights, and a section headed “Seat Stay & Chain Stay Set” with five photographs of seat stay ends labeled SW-1 to SW-5, four photographs of chain stay shapes labeled CW-1 to CW-4 and six photographs of chain stay tips labeled E-1 to E-6. The 1620 and 1621 fork blade rows share one merged block of lengths and total length, set here in the first row.]

— Page 14 —
FRONT FORK SYSTEM
“CR-MO” FRONT FORK SYSTEM
CHAMPION FORK BLADE CR-MO STEEL TANGE
“Cr-Mo” Champion Front Fork
The “Cr-Mo” Front Fork System (chromium molybdenum steel) is especially suitable for racing and superior quality bicycle models. Consisting of 5 independent parts, the chromium molybdenum steel front fork can be made-to-order. By specifying which individual parts are required, Tange will braze and supply your “Cr-Mo” Front Fork complete.
Fork Stem Cr-Mo Butted Spiral Stem (2.5t) or Hi-Tension Butted Stem (2.7t)
Fork Crown
C-10 1171
C-12 1172
C-1 1151
C-2 1152
CTR 1154
AERO 1175
AERO 1176
Fork Blade Cr-Mo Blade (1.0t) Round, Oval or Aerodynamic Design Available
Fork End
SF 1206
TF 1210
TF-R 1213
TL 1212
Tip End
Round Tip
Diagonal Cutting
Triangular Cutting
“HI-TENSION” FRONT FORK SYSTEM
“Hi-Ten” Front Fork
The “Hi-Ten” Front Fork is an excellent product suitable for all types of bicycle.
Fork Stem Hi-Tension Butted Stem (2.7t)
Fork Crown
CCL 1120
AL-13 1118
ARII-2W
ARII-OW
A-2
D-9
Fork Blade Hi-Tension Blade (1.2t) Round or Oval Available
Fork End
TF 1210
TFR 1213
TL 1212
MA
NA
Tip End
Triangular Cutting
Round Cutting
Stamped Tip
13

[The Front Fork System page with a “Cr-Mo” Champion Front Fork section above a “Hi-Ten” Front Fork section, each listing fork stem, fork crown, fork blade, fork end and tip end with photographs of the crowns, fork ends and tips and their part numbers. A Champion Cr-Mo fork blade decal sits at the top right, and the short text beside the “Cr-Mo” heading describes the five-part made-to-order fork.]

— Page 15 —
TANGE FRAME SYSTEM
FRONT FORK COMPONENTS
“CR-MO” CHAMPION FRONT FORK
Cr-Mo Front Fork
TANGE 150-B
For Racing
Cr-Mo Micro Fusion Crown
(No. 1171)
Cr-Mo Spiraled Stem
Cr-Mo Blades (φ24)
With Forged Cut Ends (No. 1213)
Micro Fusion Crown
1. Micro Fusion Crown is made of Cr-Mo for strength and lightness.
2. Micro Fusion Crown is also perfect for sharpness and exactness of design.
3. The crown is strengthened even more by the spiral stem system.
Callouts: 1.6t | 25.4ø | 254 | 60 | 2.5t | 1.6t | 60°
4. The larger diameter (φ24) fork blades also contribute greatly to increased strength.
Cr-Mo Front Fork
TANGE 124
For Racing
Cr-Mo Crown (No. 1152)
Cr-Mo Spiraled Stem
Cr-Mo Blades (φ23)
With Forged Cut Ends (No. 1213)
A
B
Cr-Mo Front Fork
TANGE 130
For Racing
Cr-Mo Crown (No. 1151)
Cr-Mo Spiraled Stem
Cr-Mo Blades (φ23)
With Forged Cut Ends (No. 1213)
A
B
Cr-Mo Front Fork
TANGE 160
For Racing
Aerodynamic Design
Cr-Mo Micro Fusion Crown (No. 1176)
Cr-Mo Spiraled Stem
Cr-Mo Blades (φ24)
With Forged Cut Ends (No. 1216)
No. 1175
Cr-Mo Micro Fusion Crown
AERO
“HI-TENSION” FRONT FORK
Hi-Ten Front Fork
TANGE 115-2
Light Weight
Fork Crown: A-18
Hi-Tension Butted Stem
Hi-Tension Blades.
With Solid Ends. (MA)
Available
TANGE 120
Fork Crown
115-1
(Stamped Tip Ends)
115-3 (TF)
Hi-Ten Front Fork
TANGE 230
For Racing
Fork Crown: CCL (No. 1120)
Hi-Tension Butted Stem
Hi-Tension Blades.
With Solid Ends. (TF No. 1210)
A
B
TFR
No.1213
Hi-Ten Front Fork
TANGE 116
For Hi-Riser
Fork Crown: A-18
Hi-Tension Butted Stem
Hi-Tension Blades.
Hi-Ten Front Fork
TANGE 122
Standard
Fork Crown D-9
Hi-Tension Butted Stem
Hi-Tension Blades.
14

[Front fork components: the “Cr-Mo” Champion front forks Tange 150-B, 124, 130 and 160 on blue panels and the “Hi-Tension” front forks Tange 115-2, 230, 116 and 122 on pink panels, each with a photograph of the fork and its description. The Tange 150-B panel has a dimensioned drawing of the spiraled stem, and small detail photographs show fork ends labeled A and B and a fork crown.]

— Page 16 —
LUG
TANGE
Champion
Lug Set
CHAMPION LUG SET
1800
1840
1820
1845
Product | High-Tension 1.0mm t Steel Part No. | High-Tension 1.0mm t with hole ◇ Part No. | Angle (mm) | Weight (g)
Top Head Lug | 1800 | 1801 | 31.8φx25.4φ 73° | 17g
Bottom Head Lug | 1820 | 1821 | 31.8φx28.6φ 58° 30′ | 22g
Seat Lug | 1840 | 1841 | 25.4φx28.6φ 73° | 25g
Lug-without Locking (ear) | 1845 | 1851 | 25.4φx28.6φ 73° | 19g
1802
1803
1822
1823
1842
1843
Product | High-tension 1.2mm t Steel Part No. | High-tension 1.0mm t Steel Part No. | Angle (mm) | Weight (g)
Top Head Lug | 1802 | 1803 | 31.8φx25.4φ 73° | 1.2t(21)g 1.0t(17)g
Bottom Head Lug | 1822 | 1823 | 31.8φx28.6φ 58° 30′ | 1.2t(27)g 1.0t(22)g
Seat Lug | 1842 | 1843 | 25.4φx28.6φ 73° | 1.2t(30)g 1.0t(25)g
Lug-without Locking(ear) | 1848 | 1847 | 25.4φx28.6φ 73° | 1.2t(23)g 1.0t(19)g
High-Tension Lug Steel Composition
| C | Si | Mn | P | S | Cu | Cr | Ni | Tension
COR-TEN O | 0.12 or less | 0.25 ~0.75 | 0.20 ~0.50 | 0.07 ~0.15 | 0.035 or less | 0.25 ~0.55 | 0.30 ~1.25 | 0.65 or less | kg/mm2 46 or more
1810
1850
1830
1855
Super Champion Lug
Product | Carbon-steel 1.4mmt Part No. | Angle | Weight (g)
Top Head Lug | 1810 | 31.8φ x 25.4φ 73° | 20 g
Bottom Head Lug | 1830 | 31.8φx28.6φ 58° 30′ | 25 g
Seat Lug | 1850 | 25.4φx28.6φ 73° | 40 g
Lug-without Locking (ear) | 1855 | 25.4φx28.6φ 73° | 32 g
TANGE
Casting
Iron Lug
CASTING IRON LUG
1849-1
1869
1849-2
Product | Part No. | Angle (mm) | Weight (mm)
Seat Lug | 1849- 1 | 25.4φx28.6φ 73° | 90g
Seat Pin | 1849- 2 | 6φx18 10φx8 |
Bottom Bracket Shell | 1869 | 28.6φx28.6φ x22.2φ 58° 30′ x64° 68 | 175g
15

[Lug sets: the Tange Champion lug set (head lugs and seat lug, with part numbers 1800 to 1855), the Super Champion lug and the casting iron lug, shown in photographs on pink panels beside tables of part numbers, angles and weights. A table of high-tension lug steel composition (COR-TEN) is also printed. In the casting iron lug table the weight cell 90g spans the seat lug and seat pin rows.]

— Page 17 —
TANGE FRAME SYSTEM
FRONT & REAR END SET
TANGE
Front & Rear
End Set
TR end (forged).
No. 1215 Fork End. 65g
No. 1315 Rear End. 155g
SFR end (forged)
Straight Drop Out End.
No. 1206 Fork End. 70g
No. 1306 Rear End. 185g
SF end (forged).
No. 1206 Fork End. 85g
No. 1305 Rear End. 175g
TF end (forged).
No. 1210 Fork End. 50g
No. 1213 Fork End. 45g
No. 1308 Rear End. 165g
CHAMPION FORK CROWN
TANGE
Champion
Fork Crown
C-10
1171
C-12
1172
CTR
1154
NT
1173
NR
1174
AERO
1175
AERO
1176
C-1
1151
C-2
1152
AL-2
1117
AL-13
1118
CCL
1120
Callouts: H W
Part No. | Symbol | Material | Internal Width W (mm) | Blade Diameter (mm) | Height (mm) | Weight
1171 | C-10 | Micro Fusion | 38 | 24 Oval | 17 | 185 g
1172 | C-12 | Micro Fusion | 39 | 24 Oval | 15.5 | 140 g
1154 | CTR | Casting Iron | 43.5 | 23 Round | 17 | 155 g
1173 | NT | Micro Fusion | 36 | 24 Round | 16 | 125 g
1174 | NR | Micro Fusion | 38 | 24 Oval | 19 | 125 g
1175 | AERO | Micro Fusion | 42 | 23 AERO | 16 | 210g
1176 | AERO | Micro Fusion | 42 | 23 AERO | 20 | 210g
1151 | C-1 | Casting Iron | 45 | 23 Oval | 18 | 150 g
1152 | C-2 | Casting Iron | 47 | 23 Oval | 17 | 195 g
1117 | AL-2 | Press | 45 | 23 Oval | 23 | 130 g
1118 | AL-13 | Press | 45 | 23 Oval | 23 | 130 g
1120 | CCL | Press | 45 | 23 Oval | 21 | 120 g
16

[The Tange front and rear end set (TR, SFR, SF and TF forged ends) and the Champion fork crowns C-10 to CCL in photographs. A drawing marked H and W and a table of part numbers, materials, widths, blade diameters, heights and weights are printed.]

— Page 18 —
CHAMPION FRAME FITTING
PART NO.
FF. Front Fork
T. Top Tube
D. Down Tube
M. Seat Tube
S. Seat Stay
B. B.B. Shell
R. Seat Stay and Chain Stay
Callouts: S① S②⑤⑨ S⑥ S③④⑦ S⑧ S⑩ R⑦ R⑫ R① R② R③ R④ R⑤ R⑥ R⑪ R⑨ R⑩ R⑧ R⑭ M③ M① M①-3 M② B①②③ ID T④ T③ T② T① D② D① FF① FF② FF③ FF④
FRONT FORK PARTS
TANGE
Front Fork
Parts
FF1
Bolt for Caliper Brake
Callouts: 4 45 6φ P=1
FF2
Hanger Fittings for Mud Guard
Callouts: 6.2φ 10 10 20 6φ 6φ P=1.0 1.2 3 1.2 25 6mm Nut
FF3
Canti Brake Fittings
Callouts: P=1 8φ 12φ 14φ 10φ 11.5 7 8.5 27
FF4
Fork Blade Reinforcement Plate
Thickness 1 m/m
Callouts: 20 80 1 20 26 W W L L
Type | Size WxL | Shape
FF 4 -1 | 20 x 80 | (Large) W/Three Holes
2 | 22 x 59 | (Small) W/Three Holes
3 | 22 x 59 | (Small) W/0 Hole
4 | 19.5 x 55 | (Small) W/Three Holes
5 | 19.5 x 55 | (Small) W/0 Hole
6 | 21 x 56 | (Small) W/Three Holes
7 | 21 x 56 | (Small) W/0 Hole
17

[Champion frame fitting: a drawing of a frame and fork with the fitting positions marked by part letters and circled numbers (top tube, down tube, seat tube, seat stay, chain stay, bottom bracket shell and front fork), with a key to the letters. Below, front fork parts FF1 to FF4 (bolt for caliper brake, hanger fittings for mud guard, canti brake fittings and fork blade reinforcement plate) in dimensioned drawings, with a table of the seven reinforcement plate types.]

— Page 19 —
TANGE FRAME SYSTEM
FF5
Front Carrier Fixing Bolt
Callouts: L ℓ1 t ℓ2 D1 D2
Type | L | ℓ1 | ℓ2 | t | D1 | D2
FF-5 -1 | 39 | 27 | 7 | 4 | 6 | 6
2 | 25 | 13 | 8 | 4 | 6 | 5
3 | 24 | 11 | 10 | 4 | 6 | 6
FF6
Round Headed Nut
Callouts: d W H
Type | H | d | W
FF- 6 -1 | 8 | 5 | 10
2 | 8 | 6 | 10
FF7
Wing Nut
Callouts: W d
Type | H | d | W
FF- 7 -1 | 10 | 5 | 20
2 | 12 | 6 | 25
FF8
Ring Fitted Screw
Callouts: d ℓ
Type | d | ℓ
FF- 8 -1 | 5 | 11
2 | 6 | 12
TANGE
Top Tube
Parts
TOP TUBE PARTS
T1
Guide Ring for Wire
Callouts: d D2 D1
Type | D1 | D2 | d
T 1 -1 | 11φ | 7φ | 2.5φ
T2
Wire Stopper
Callouts: 1 D1 D2 d L 3 D1 D2 d L
Type | D1 | D2 | d | L
T 2 -1 | 9 | 7φ | 2.5φ | 7
2 | 8 | 6φ | |
T3
T4
Cover for Incorporated Brake Wire
Callouts: T3 5φ Hole ℓ1 ℓ2 D2 D1 510 T4
ℓ1 ℓ2 Bending R
T3 -1 15 46 14
T3 -2 14 25 14
D1 L t D2
T 4 -1 4φ x 510 x 0.8t x 2.4φ
Inserting Tube for T3
T5
Split Outer
(Metal Bearing)
Callouts: 10 2.5φ 2 6.2φ 8φ
18

[Front fork parts FF5 to FF8 and top tube parts T1 to T5 in dimensioned drawings on purple and green panels, each with a table of sizes. The parts are a front carrier fixing bolt, round headed nut, wing nut, ring fitted screw, guide ring, wire stopper, brake wire cover and split outer.]

— Page 20 —
T6
Outer Guide Machine Processed
Callouts: 5φ 6.5 6.8
T7
Outer Guide Pressed
Callouts: 6.6 5.3φ
DOWN TUBE PARTS
TANGE
Down Tube
Parts
D1
Shifting Lever Fittings
Callouts: 14.5R P2 0.8 5.5φ 5φ 9φ 5.8-12 3.5 6 3 12.5
D2
Shifting Lever Stopper
Callouts: 12 20 1 2 3 Under Side: Convex Projection
Thickness 1mm. Bend 14.3R
SEAT TUBE PARTS
TANGE
Seat Tube
Parts
M1
Bottle Fitting Nut (Natural Color)
Callouts: M1-1,2 M1-3 D d D2 t ℓ d ℓ
Type | D1 | D2 | d (Screw) | t | ℓ
M 1 -1 | 10 | 7.8 | 6 P=1 | 2 | 8
2 | 9 | 6.5 | 5 P=0.8 180 | 1.5 | 6
3 | Screw for M -2 C/P | | 5 180 | | 10
M2
Bottle Fitting Reinforcement
Callouts: 20 6.6 25 14.3R t
M3
Pump Peg
(Natural Color)
Callouts: M3-1,2 M3-3,4 L ℓ L=20 8φ 8φ
Type | L | ℓ
M- 3 -1 | 30 | 22
2 | 26 | 18
M- 3 -3 Pump peg-bent
4 L=17
M-3-1·2 Straight Type
M-3-3·4 Bent Type
19

[Outer guides T6 and T7, down tube parts D1 and D2 and seat tube parts M1 to M3 in dimensioned drawings, with tables of sizes for M1 and M3. In the M1 table the words “Screw for M -2 C/P” sit in a cell spanning the D1 and D2 columns.]

— Page 21 —
TANGE FRAME SYSTEM
SEAT PARTS
TANGE
Seat
Parts
S1
Seat Inserting Collar
(C/P Finish)
Callouts: D1 d D2 t ℓ
Type | D1 | D2 | d | t | ℓ
S 1 -1 | 12 | 8 | 6 | 1.5 | 8
2 | | Self Color | | |
S2
Seat Collar
(Natural Color)
Callouts: D d L 2.8
Type | D | d | L | Spot-facing R
S- 2 -1 | 11 | 6.5 | 22 | 14.3
2 | 12 | 7.5 | 24 | 14.3
3 | 14 | 8.5 | 26 | 14.3
S- 2 -3 Special specification (Split).
S3
Seat Pin With Allen Key Bolt
Callouts: 10φ 5 6 L d d 8
Type | d | L
S- 3 -1 | 6 P=1 | 35
2 | 6 | 40
3 | 6 | 45
S4
Seat Pin With Washer & Nut
(C.P Finish)
Callouts: L A Type B Type
Type | d | L | Nut washer.
S 4 -1 | 6 | 32, 35, 38 | A or B
2 | 7 | 32, 35, 40, 43, 48 |
S5
Seat Collar
(S 5-1 L = 25
S 5-2 L = 31)
S-5 Seat Collar
Callouts: 15.5R 12.7φ 6 10.5φ L
S-6 Malleable Cast Iron
(Natural Color)
Callouts: 31 30.6φ 73° r-Cut 10φ
S6
Malleable Cast Iron (Natural Color)
S7
Cap Bolt
“Cr-Mo” Steel
(C/P Finish)
Callouts: 1.2 10φ 3 W 6 L 10φ 1 8
Type | d | L | W
S 7 -1 | 6 | 10,12,14,16,20,25,30,35,40,50 | 5
2 | 5 | 8,10,12,14,16,20,25,30 | 4
3 | 6 | Nut |
S8
Allen Key Seat Tweezers Bolt
(C/P Finish)
Callouts: 5 5 8φ 12φ L
Type | L | Application
S 8 -1 | 22 | For S-9-1
2 | 19 | For S-9-2
S9
Seat Collar
(Natural Color)
(For S8)
Type | L
S -9 -1 | 26
2 | 23
S-9 Seat Collar-Ground
Callouts: L 8.5φ 12φ 14.3R
S10
Wire Hanger
S-10 Wire Hanger
Callouts: 10 5 1.8 2.4φ 6mm Screw 8.2φ 2φ 5 30
20

[Seat parts S1 to S10 (collars, seat pins, a malleable cast iron part, a cap bolt, a tweezers bolt and a wire hanger) in dimensioned drawings with tables of sizes. In the S1 table “Self Color” spans the D2, d and t columns, and in the S4 table “A or B” spans both rows.]

— Page 22 —
TANGE B.B.Shell Parts
TANGE Chain Stay Parts

B.B. SHELL PARTS
B1 B2 B3 Wire Lead Tube (Natural Color)
Callouts: 1 2 3
Type | Uses
B 1 | For rear.
B 2 | For rear.
B 3 | For front.

CHAIN STAY PARTS
R1 Upper Bridge Reinforcement (Natural Color)
Callouts: 1 d ℓ1 ℓ2 R 2 3
Type | ℓ1 | ℓ2 | d | R
R 1 -1 | 18 | 29 | 8 | 6.5
2 | 17.6 | 17.6 | 9 | 7
3 | 16 | 23 | 9.4 | 7.9

R2 Bridge (with Spot Facing) (Natural Color)
Callouts: L1 L2 12.7φ d
Type | Difference between L1 and L2 | d | Spot facing.
R 2 -1 | Less than 4. | 6.2φ | 14.5φ, 16φ
2 | Less than 4. | 5.5φ | 22.2φ
3 | Less than 4. | 8 – | 14.5φ, 16φ

R3 Reinforcement Tube for Upper Bridge (Natural Color)
Callouts: 6.1φ 8φ 13

R4 Metal Fitting Seat (Ground for Brake to be Fixed to Upper Bridge)
Callouts: R4-1~3 R4-4 D1 d D2 ℓ t
Type | D1 | D2 | d | t | ℓ
R 4 -1 | 14 | 8.0 | 6.2 | 1.6 | 13
2 | 14 | 8.0 | 6.2 | 1.6 | 15
3 | 14 | 8.0 | 6.2 | 1.6 | 18
4 | 14 | 8.1 | — | 1.5 | —

R5 Bolt
Callouts: M6 P=1 28

R6 Bracket (Natural Color)
R7 Carrier Fixing Board
Callouts: R6 13 22 10 6 20 R7 d 13 17
R-7 -1 d=5.5φ
2 d=6M P=1

R8 Chainguard (Natural Color)
Callouts: 3.2φ
21

[Tange catalog page of B.B. shell parts (wire lead tubes B1 to B3) and chain stay parts (R1 to R8: upper bridge reinforcement, bridge, reinforcement tube, metal fitting seat, bolt, bracket, carrier fixing board and chainguard) with yellow and pink dimension drawings and four small tables.]

— Page 23 —
TANGE FRAME SYSTEM

R9 Iron Wire Block Metal Boss
R10 Brass Outer Receptacle U/P
Callouts: R9 d R10 4.5φ 5.5φ 4.5 11
Type | d
R 9 -1 | 4.1φ
2 | 5M JIS
3 | 5M ISO

R11 Brass Brake Tightening Bolt and Ring N/P
Callouts: ℓ1 ℓ2 d M6 P=1
Type | d | ℓ1 | ℓ2
R 11 -1 | 5.3 | 9 | 12
2 | 4.2 | 7 | 12

R12 Chain Stay Cap
Thickness 1m/m
Callouts: 1 L ℓ 2 3 4
Type | L | ℓ
R 12-1 | 42 | 16
2 | 58 | 15.8
3 | 43 | 17
4 | W/Mark

R13 Rear Carrier Fixing Bar
Callouts: 6mm Screw 7.5φ 10φ ℓ=12

R14 Fitting Bridge Reinforcement
Callouts: 20 8 9.5φ 0.8t 22φ

R15 Chain Stay Protector
Synthetic Rubber
Color: Black, Ivory or Brown
Callouts: CHAMPION 2.2φ 3.5R 3.5 1.8 220

Brazing Cr-Mo Materials
1. When brazing, please use material with expansion strength of 60kg/mm2 at a low melting point. The melting point of brazing material is around 850°C. For flux, use either gas flux or paste flux No. 110.
2. To ensure smooth brazing flow, it is important to clear away impurities from the parts to be brazed.
3. Before braxing, the tube and minor parts have to be thoroughly polished. For heating, concentrically apply small amounts and soft braze as far as possible. Also, take care not to allow over heating.
4. After brazing, cool as slowly as possible.
5. If brazed section appears to be brittle, heat again at 650° ~ 700°C and cool slowly.
6. Where to cut the TUBE. TOP TUBE: Cut the blue varnished side (to be fixed to the seat tube). DOWN TUBE: Cut the blue varnished side (to be fixed to the B.B. Shell). SEAT TUBE: Cut the blue varnished side (to be fixed to the Seat Lug).
7. Take note of the butted section length (ℓ1 and ℓ’1) when cutting the tube.
22

[Tange catalog page of chain stay parts R9 to R15 (iron wire block metal boss, brass outer receptacle, brass brake tightening bolt and ring, chain stay cap, rear carrier fixing bar, fitting bridge reinforcement and chain stay protector) with yellow dimension drawings and three tables, above a blue panel of seven brazing notes headed “Brazing Cr-Mo Materials”. A small boxed patch sits over the figure “60kg/mm” in note 1.]

— Page 24 —
MOTOCROSS COMPONENTS
TANGE BMX Front Fork
FRONT FORK

Cr-Mo Front Fork
TRX
For Racing.
Cr-Mo Spiraled Stem.
Cr-Mo Oval Blades.
With Specially Shaped Ends.
Color: Blue, Red, Gold or C.P. Finish.
Weight: 1 lb. 7 oz. (652g)

Cr-Mo Front Fork
TX-500W
For Racing
Cr-Mo Butted Stem & Blades.
With Specially Shaped Ends.
Color: Blue, Red, Gold or C.P. Finish.

Hi-Tension Front Fork
TX-1200W
For Racing & Leisure.
H.T. Butted Stem & Specially Strengthened Hi-Tension Steel Blades.
With Specially Shaped Ends.
Color: Blue, Red, Gold or C.P. Finish.

Hi-Tension Front Fork
TX-1200
For Racing & Leisure.
H.T. Butted Stem & Specially Strengthened Hi-Tension Steel Blades.
Color: Blue, Red, Gold or C.P. Finish.

Features of The TRX Front Fork
Reinforced spiral ribbing to strengthen critical stress areas of the stem.
Callouts: 1.6t 25.4φ 170 60 2.5t 1.6t 60°
A first ever in BMX, the spiral stem of the front fork is stronger and lighter than ever before. A unique spiral ribbing system is responsible for these special properties so necessary in BMX racing.
Oval, chrome moly steel blades.
According to data based on dynamics, Tange has graded each fork blade for strength and lightness. This means those areas in need of extra strength are thicker. And areas which are not subject to stress are thinner for extra lightness.
Spiral Stem
Reinforced spiral ribbing to strengthen critical stress areas of the stem.
Oval Tube
Oval, chrome moly steel blades.

TANGE BMX Accessories
BMX ACCESSARY PARTS
BMX SEAT POST
Possessing three times the strength of conventional alloy products, Tange’s seat post is both more durable and lighter. This component was made exclusively for BMX racing.
Weight: 210g.
Material: Cr-Mo
Color: C.P. Finish
Length: 270mm
23

[Tange page of motocross components: the BMX front forks TRX, TX-500W, TX-1200W and TX-1200 photographed in silver, red, silver and blue on pink panels, a detail photograph and drawing of the TRX spiral stem and oval blades, and a BMX seat post.]

— Page 25 —
TANGE FRAME SYSTEM

TANGE BMX Frame Tube
“CR-MO” CHAMPION FRAME TUBE
Head Tube
Top Tube
Bridge
Seat Tube
Seat Stay
Down Tube
Chain Stay
Rear Fork End
Bottom Bracket
CHAMPION motocross CHROME MOLYBDEN STEEL BUTTED TUBES TANGE INDUSTRIES, LTD.

BMX FRAME SET
CHAMPION OVAL [illegible] BUTTED TUBES TANGE INDUSTRIES LTD[?]
Frame Set
Cr-Mo Oval Double Butted Tube
Top Tube: 28.6 x 1.0/0.8 x Oval D.B.T
Down Tube: 28.6 x 1.0/0.8 x Oval D.B.T
Seat Tube: 25.4 x 1.3 P.G
Head Tube: 36.6 x 2.0
Seat Stay: 15.9 x 1.0 Oval P.G
Chain Stay: 22.2 x 0.8 Oval P.G

CHAMPION motocross [illegible] BUTTED TUBES TANGE INDUSTRIES, LTD.
Frame Set
Cr-Mo Double Butted Tube
Top Tube: 28.6 x 1.2/0.9 x D.B.T.
Down Tube: 28.6 x 1.2/0.9 x D.B.T
Seat Tube: 25.4 x 1.3 P.G
Head Tube: 36.6 x 2.0
Seat Stay: 15.9 x 1.0 P.G
Chain Stay: 15.9 x 1.0 P.G

CHAMPION motocross [illegible] P.G. TUBES TANGE INDUSTRIES LTD
Frame Set
Cr-Mo P.G. Tube
Top Tube: 25.4 x 1.2
Down Tube: 25.4 x 1.2
Seat Tube: 25.4 x1.3
Head Tube: 36.6 x 2.0
Seat Stay: 15.9 x 1.0
Chain Stay: 15.9 x 1.0

Mangaloy BUTTED MANGANESE ALLOY TUBING TANGE INDUSTRIES LTD.
Frame Set
Mangaloy Tube
Manganese Alloy Tubing
Top Tube: 25.4 x 1.3
Down Tube: 25.4 x 1.3
Seat Tube: 25.4 x 1.3
Head Tube: 36.6 x 2.0
Seat Stay: 15.9 x 1.3
Chain Stay: 15.9 x 1.3

Cr-Mo Double Butted Tubing
The double butted ends of Tange’s tubing give strength to the points most subject to stress and tension along with improved welding. And the central section of the tube has been thinned for the necessary flexibility in coping with the demands of BMX racing. This perfect balance, used for the first time ever in BMX racing, can only be found in Tange’s Double Butted Tubing.
Callouts: Butted Part, Tapered Part, Thinned Part, Tapered Part, Butted Part, 1.2 0.9 1.2
COMPOSITION
C | Si | Mn | Mo | S | P | Cr
0.33% | 0.35% | 0.85% | 0.25% | 0.03% Max. | 0.03% Max. | 1.2%

Cr-Mo Oval Tubing
Tange created a unique, new seamlen oval tubing which greatly reduces air resistance for aerodynamic efficiency, while at the same time increasing strength. This mean the butted sections’ thickness could be reduced for extra lightness. In addition, a special ridge along the tube center provides extra strength and durability for the toughest racing conditions. The only tubing developed especially for BMX racing — Tange’s Cr-Mo Oval Tubing.

Mangaloy Tubing
A futuristic material for bicycle frames has appeared in the shape of Tange’s Mangaloy Tubing. Almost as strong as Cr-Mo, Mangaloy is far superior to work with in welding and for manufacturing processes. This revolutionary material will be in great demand for bicycle frames throughout the BMX industry.
COMPOSITION
C | Si | Mn | P | S | Cu | Ti
0.12 Max. | 0.15~0.35 | 0.90 Max. | 0.06 Max. | 0.035 Max. | 0.25~4.50 | 0.15 Max.
24

[Tange page of BMX frame tube: an exploded pink diagram labeled “CR-MO” CHAMPION FRAME TUBE with the head tube, top tube, bridge, seat tube, seat stay, down tube, chain stay, rear fork end and bottom bracket, a red BMX frame with fork, and four frame set listings (Cr-Mo Oval Double Butted Tube, Cr-Mo Double Butted Tube, Cr-Mo P.G. Tube and Mangaloy Tube) each beside a Champion or Mangaloy decal. Tubing notes with a butted tube section drawing and two composition tables fill the right side.]

— Page 26 —
EXPORT PACKING CHART
Material | Product | Size of Part No. | Contents | Net Weight (kgs) | Gross Weight (kgs) | Measurement (ft)
| Champion Frame Tube 11-Piece | | 20 Small Boxes | 38 | 43 | 3.7
| (Set in Packing Case) | | | | |
| | Dia x Length mm | | | |
| Butted Frame Tubes | 25.4 x 600 | 100 pcs | 101 | 118 | 5.5
| | 25.4 x 600 | | 28 | 30 | 1.7
| | 28.6 x 650 | 100 pcs | 112 | 131 | 6.7
| | 28.6 x 650 | | 31 | 33 | 2.3
Cr-Mo | Head Tubes | No. 1401 | 250 pcs | 38 | 40 | 2
| Seat Stays | No. 1501 | 100 pcs | 31 | 33 | 2.0
| Chain Stays | No. 1551 | | 30 | 32 |
| Fork Blade | No. 1601 ~ 5 | 100 sets | 39 | 41 | 2.0
| Fork Stem | No. 1701 | 100 pcs | 23 | 25 | 0.7
| | No. 1420 | 100 pcs | 35 | 37 | 1.7
| | No. 1421 | 100 | 33 | 35 | 1.7
| Butted Frame Tube | No. 1440 | 100 | 42 | 44 | 2.1
| | No. 1441 | 100 | 40 | 42 | 2.1
| | No. 1460 | 100 | 42 | 44 | 2.1
| | No. 1461 | 100 | 40 | 42 | 2.1
| Head Tube | No. 1470 | 100 | 14 | 15 | 0.7
| Seat Stay | No. 1521 | 100 sets | 35 | 37 | 2.0
Hi-Ten | Chain Stay | No. 1561 | | 39 | 41 | 2.0
| Fork Blade | No. 1622 ~ 3 | 50 sets | 26 | 28 | 1.0
| Fork Stem | No. 1720 | 100 pcs | 27 | 29 | 1.0
| | No. 1721 | 100 | 31 | 33 |
| | No. 1206 | 500 sets | 43 | 45 | 1.5
| Fork Ends | No. 1212 | | 30 | 32 | 1.2
| | No. 1210 | 500 | 25 | 27 | 1.0
| Rear Ends | No. 1305 | 200 sets | 35 | 37 | 1.5
| | No. 1308 | | 33 | 35 |
| | No. 130 | | | |
| | No. 124 | | | |
Cr-Mo | Front Forks | No. 150 | 10 Small Boxes | 10 | 14 | 2.0
| | No. | | | |
| | No. | | | |
| | No. 115 ~ 1 | 25 pcs | 22 | 25 | 2.5
| | No. 115 ~ 2 | 25 pcs. | 22 | 25 | 2.5
Hi-Ten | | No. 115 ~ 3 | 25 pcs | 22 | 25 | 2.5
| | No. 230 | 25 pcs | 22 | 25 | 2.5
| | No. 116 | 25 pcs | 18 | 21 | 2.0
| | No. 122 | 25 pcs | 25 | 28 | 2.5
| | No. 1800 ~ 3 | | | |
| Lug 3-pce Sets | No. 1820 ~ 3 | 200 sets | 40 | 43 | 2.4
| | No. 1840 ~ 3 | | | |
| Bracket Shell | No. 1869 | 100 pcs | 21 | | 2.9
| Casting Iron | | | | |
| Set Lug | No. 1849-1 ~ 2 | 200 pcs | 18 | 20 | 3.0
| | No. 1151 | | | |
| Casting Iron | No. 1152 | 150 pcs | 26 | 28 | 1.5
| Fork Crown | No. 1154 | | | |
| | No. 1117 | | | |
| | No. 1118 | 150 pcs | 20 | 22 | 1.0
| Pressed Fork Crown | No. 1120 | | | |
| | No. 1171 No. 1174 | | | |
| | No. 1172 No. 1175 | 150 pcs | 28 | 30 | 1.5
| | No. 1173 No. 1176 | | | |
| Frame Tube | Cr-Mo D Tube | 10 set (12 pcs ea) | 20 | 24 | 2.5
| BMX Cr-Mo & | Cr-Mo P.G Tube | 10 set (12 pcs ea) | 20 | 24 | 2.5
| Hi-Ten | Mangaloy Tube | 10 set (12 pcs ea) | 22 | 26 | 2.5
| | TRX | 25 | 17 | 20 | 2.0
| Front Fork | TX-500 W | 25 | 19 | 22 | 2.0
| BMX | TX-1200 W | 25 | 20 | 23 | 2.0
| | TX-1200 | 25 | 20 | 23 | 2.0
25

[Tange export packing chart, a seven-column table of materials (Cr-Mo and Hi-Ten), products with part numbers, box contents, net and gross weights in kilograms and measurements in feet, covering frame tubes, stays, fork blades and stems, fork ends, lugs, fork crowns and BMX frame tubes and forks. Rows with several printed lines are given one line per printed line, with the shared cells (contents, weights, measurement) set once beside the group; the first row’s product text spans the product and part number columns, and one gross weight cell is empty.]

— Page 27 (inside back cover) —

[A plain purple page with a small square color photograph at its center showing rows of upright metal fixtures lit by glowing orange lights, with no printed words or folio.]

— Page 28 (back cover) —
Tange TANGE
TANGE INDUSTRIES, LTD.
Head Office: 6-635, Otori Higashi-machi, Sakai, Osaka
Tel. 0722-71-8181
Tokyo Branch: 1-15-5, Miyagi, Adachi, Tokyo
Tel. 03-914-2291

[Back cover with the Tange oval logo and the TANGE INDUSTRIES, LTD. head office and Tokyo branch addresses above a red frame and fork with a Champion decal photographed on a printed grid. The paper is yellowed, with spots and a worn right edge.]

Ebykr presents this material for research and education. If you hold rights to it or notice an ownership issue, please contact us and we will respond promptly.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.