Speedwell Titalite Cycle Frame Folder of about 1975 — Technical Data, Roadster Frame Mark III and Track Frame Mark IV, the Speedwell Gear Case Co., Birmingham and Coventry

Catalog 1975 (est.) 4 pages United Kingdom

Source: bulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr.

About this document

MarqueSpeedwell
TypeCatalog
Year1975 (estimated)
PublisherThe Speedwell Gear Case Co. Ltd., Birmingham and Coventry
CountryUnited Kingdom
LanguageEnglish
Pages4
Sourcebulgier.net (Mark Bulgier's catalog archive), no scanner named for this folder; enlarged for Ebykr.
CreditEbykr archive
IdentifierPermalink http://bulgier.net/pics/bike/Catalogs/Speedwell/Earlier('75%20maybe)/
TranscriptionTranscribed by eye
Cite this document

Reference

The Speedwell Gear Case Co. Ltd., Birmingham and Coventry. Speedwell Titalite Cycle Frame Folder of about 1975: Technical Data, Roadster Frame Mark III and Track Frame Mark IV, the Speedwell Gear Case Co., Birmingham and Coventry. c. 1975. Ebykr, https://ebykr.com/library/speedwell-titalite-folder-about-1975/.

Wikipedia

{{cite book |title=Speedwell Titalite Cycle Frame Folder of about 1975: Technical Data, Roadster Frame Mark III and Track Frame Mark IV, the Speedwell Gear Case Co., Birmingham and Coventry |publisher=The Speedwell Gear Case Co. Ltd., Birmingham and Coventry |date=c. 1975 |url=https://ebykr.com/library/speedwell-titalite-folder-about-1975/ |via=Ebykr |access-date=}}

Transcription

THE SPEEDWELL "TITALITE" CYCLE FRAME Every specialist who has handled this wonderful new advancement has described it as "the most revolutionary development in 20 years." Here are some of the technical facts behind this modern marvel. Speedwell THE SPEEDWELL GEAR CASE Co. LTD. BIRMINGHAM AND COVENTRY Technical Data ROADSTER FRAME MARK III DIMENSIONS AND ANGLES …

Read the full transcription (4 pages)

Four pages of a Speedwell “Titalite” cycle frame folder: the cover, Technical Data drawings of the Roadster frame Mark III and Track frame Mark IV, the text on design and finish and a technical data amendment. The text names “1973 standards”.

— Page 1 (front cover) —
THE SPEEDWELL “TITALITE” CYCLE FRAME

Every specialist who has handled this wonderful new advancement has described it as “the most revolutionary development in 20 years.”

Here are some of the technical facts behind this modern marvel.

Speedwell

THE SPEEDWELL GEAR CASE Co. LTD.
BIRMINGHAM AND COVENTRY

[The cover of the Speedwell “Titalite” cycle frame folder, with a studio photograph of a bare diamond frame and fork against draped cloth, and a winged Speedwell script logo.]

— Page 2 —
Technical Data

ROADSTER FRAME MARK III
DIMENSIONS AND ANGLES SHOWN TO SUIT 23″ FRAME FOR 21″ 22″ & 24″ FRAMES DIMENSIONS & ANGLES MODIFIED ACCORDINGLY EXCEPT FOR ANGLE ‘A’ WHICH REMAINS CONSTANT
Callouts: 5/8″ | 46° | 23″ | 62° | ANGLE A | 2 1/16″ | 40½” WHEELBASE

TRACK FRAME MARK IV
DIMENSIONS AND ANGLES SHOWN TO SUIT 23″ FRAME FOR 21″ AND 22″ FRAMES DIMENSIONS AND ANGLES MODIFIED ACCORDINGLY EXCEPT FOR ANGLE ‘A’ WHICH REMAINS CONSTANT
Callouts: 5/8″ | 48° | 23″ | 63° | ANGLE A | 1½” | 39½” WHEELBASE

[Technical Data page with two line drawings in ruled boxes: the Roadster Frame Mark III with a rear dropout and fork end, and the Track Frame Mark IV, each with its dimension lines, angles, the constant Angle A and the wheelbase. The drawings are labeled in drafted capitals and are not printed with a folio.]

— Page 3 —
DESIGN & CONSTRUCTION
Angles and detailing are generally to 1973 standards. Lengths are based on 21″, 22″, 23″ and 24″ for the road frame, and on 21″, 22″ and 23″ for the track with the appropriate forks.

Bottom bracket to suit English or metric threads. Italian type seat pillars and fork ends are provided, and sizes are generally to suit continental standards.

CUSTOMS/PURPOSE BUILT FRAMES
A limited supply of frames are built to individual specifications for top class riders.

Measurement charts are available for these personal orders.

WEIGHTS & STRENGTH
Generally the frame complete with forks and head races will weigh about 3 lbs. 5 ozs. but this can vary slightly with frame size, bosses, guides, etc., which go to make up the individual specification. Material is commercially pure titanium grade 125 or equivalent having a tensile strength in the range 60 KSI — 79 KSI. Welding is carried out under the strictest control and typical tensile strengths will be 50 — 60 KSI. Young’s modulus is in the order 15-17 10^6lbf/in^2 with fatigue limits 55 — 60% of TS.

These details compare most favourably with conventional “racing irons” and allow a weight saving of about 30% with much improved strength characteristics.

Selection of tube diameter, material grades, wall thicknesses and tapers permit a frame of most adequate rigidity without conventional lugging, bearing in mind the peculiar attributes of vacuum welding and the enhanced strength of joint.

FINISH
Weld standards: Our operators consider this class of work to be as jewellery standards, and weld cleaning shows this to perfection.
Colour: Titanium is one of the best materials for corrosion resistance having common usage in the nuclear space chemical and medical fields. Consequently a finish of high polish like the best stainless steel can be offered and this finish can last a life time. On a commercial scale many attractive colours can be applied by anodising techniques. Aero-drying paint can be applied and also transfers (demalows) with careful preparation including a pickling bath.

TESTING
Mechanical and service testing has shown this frame to be of outstanding quality but the final judgement lies with the specialist rider. The individuals report is invariably “Even better than its looks.” All frames are guaranteed for twelve months for any defects in workmanship and materials subject only to normal wearing and usage.

ALTERNATIVE FRONT AND REAR FORK LUGS

[A text page headed Design & Construction, Customs/Purpose Built Frames, Weights & Strength, Finish and Testing, with three outline drawings of alternative front and rear fork lugs (dropout ends) stacked in a ruled box at the right. The page has no printed folio.]

— Page 4 —
TECHNICAL DATA — AMENDMENT

The following information is added for use in conjunction with the road and track frame drawing:-

ROAD FRAME

22″, 23″, 24″ Top Tube is 22½” (centres) with 73° head and 73° seat angles.

21″ frame has top tube 21½” (centres) with 73° head and 75° seat angles.

Wheelbase is 39¾” with 10½” bracket.
Fork rake is 42 mm (1.65″) wheel size 27″ only.

TRACK FRAME

Built with minimum clearances.

Speedwell

THE SPEEDWELL GEAR CASE Co. LTD.
BIRMINGHAM AND COVENTRY

[A typed-style Technical Data Amendment page for the Road Frame and Track Frame, with the winged Speedwell script logo and the company name and towns at the foot. The page has no printed folio.]

Ebykr presents this material for research and education. If you hold rights to it or notice an ownership issue, please contact us and we will respond promptly.

The Ebykr Digest

A monthly letter on classic lightweight bicycles

New articles, timelines, catalog finds and registry activity — assembled from the archive once a month. Your address is never shared.

Double opt-in. One email per month. Unsubscribe at any time with one click.